V1.0.16a Phoenix Patch For Reality Cam 25-04-05

[lezwez]

untested

V1.0.16a Phoenix Patch For Reality Cam 25-04-05
Phoenix V1.0.16a

*******************************
***WARNING!! WARNING!! WARNING!!***
*******************************
* OmniKrypt V1.0.4 REQUIRED! This patch will not work on previous versions.
To check whether you have OmniKrypt V1.0.4, go into the CAM main menu, and see if there is "Welcome V1.0.4" on top of the screen.

NOTE : OmniKrypt V1.0.4 available via OTA download on Dptv 12.092 H Hotbird 13east since 02/12/2004.


* DAN Viaccess2.4 added! Enjoy!
* Added Irdeto1 C+ NL auto-roll
* Polsat works again


Full.Zip Includes (+ patch for HUMAX users)

1) .Upd - PCMCIA / PCB Serial Programmer.
2) .Hex - Smart card download using Fun5 / Fun6 / Fun7 cards.
**Erase the Fun7 card clean before it will program right with CAS2**
3) README

PLEASE NOTE AFTER UPGRADE YOU MUST GOTO INFORMATION IN THE CAM MENU AND PRESS OK/SELECT TO ACTIVATE THE PATCH


i just come across this i like to help out thats all its a came i have no used very much

enjoy

[lezwez]

Phoenix V1.0.16b


*******************************
***WARNING!! WARNING!! WARNING!!***
*******************************
* OmniKrypt V1.0.4 REQUIRED! This patch will not work on previous versions.
To check whether you have OmniKrypt V1.0.4, go into the CAM main menu, and see if there is "Welcome V1.0.4" on top of the screen.

NOTE : OmniKrypt V1.0.4 available via OTA download on Dptv 12.092 H Hotbird 13east since 02/12/2004.


* Fixed TV Cabo
* Added new nagra provider 2201 (Multicanal 30W 11535V 24500 3/4)


Full.Zip Includes (+ patch for HUMAX users)

1) .Upd - PCMCIA / PCB Serial Programmer.
2) .Hex - Smart card download using Fun5 / Fun6 / Fun7 cards.
**Erase the Fun7 card clean before it will program right with CAS2**
3) README


PLEASE NOTE AFTER UPGRADE YOU MUST GOTO INFORMATION IN THE CAM MENU AND PRESS OK/SELECT TO ACTIVATE THE PATCH


:D

[lezwez]

Phoenix V1.0.16c
************************************************
***WARNING!! WARNING!! WARNING!!***
************************************************
* OmniKrypt V1.0.4 REQUIRED! This patch will not work on previous versions.
To check whether you have OmniKrypt V1.0.4, go into the CAM main menu, and see if there is "Welcome V1.0.4" on top of the screen.

NOTE : OmniKrypt V1.0.4 available via OTA download on Dptv 12.092 H Hotbird 13east since 02/12/2004.

* Fixed TV Cabo/Polsat

1) .Upd - PCMCIA / PCB Serial Programmer.
2) .Hex - Smart card download using Fun5 / Fun6 / Fun7 cards.

**Erase the Fun7 card clean before it will program right with CAS2**


PLEASE NOTE AFTER UPGRADE YOU MUST GOTO INFORMATION IN THE CAM MENU AND PRESS OK/SELECT TO ACTIVATE THE PATCH

Enjoy

THE MATRIX TEAM

[lezwez]

There is a problem with the short CI initialization time on Humax 5x00 series STB when upgrading RealityCAM with Phoenix.
We are able to find a workaround, but this will require a little bit more effort on your part when upgrading RealityCAM in your Humax STB.

Please follow the instruction below :
(Step 1)
Tune to a FTA channel.

(Step 2)
a. Upgrade/download the .upd or .hex file in folder "update file 1"
b. Goto CI menu->OmniKrypt->Information menu, and you will see "Press OK to copy update file 1".
Press OK! After around 10-20 seco***, the CAM will reset.
c. Goto CI menu->OmniKrypt->Information menu again, and check if you see "Please download update file 2".
If yes, please proceed to (Step 3)

(Step 3)
a. Upgrade/download the .upd or .hex file in folder "update file 2"
b. Goto CI menu->OmniKrypt->Information menu, and you will see "Press OK to copy update file 2".
Press OK! After around 10-20 seco***, the CAM will reset.
c. Goto CI menu->OmniKrypt->Information menu again, and check if you see "Please download update file 3".
If yes, please proceed to (Step 4)

(Step 4)
a. Upgrade/download the .upd or .hex file in folder "update file 3"
b. Goto CI menu->OmniKrypt->Information menu, and you will see "Press OK to copy update file 3".
Press OK! After around 10-20 seco***, you will see "Press OK to begin image-copy-over & reboot".
Press OK again! After around 20-30 seco***, the CAM will reset.

(Final step)
Goto CI menu->OmniKrypt->Information menu, and press OK to activate Phoenix.

Enjoy

THE MATRIX TEAM