Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Vantage HD Firmware

  1. #1
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Vantage HD Firmware

    1/12/2009

    New Final Software 2.57 T-O


    New Features:
    1. Dolby Digital Plus support
    2. CI option to choose the Entschlüsselungsart (Twin) devices.
    The menu / multimedia / PVR settings, there is a new option "CI Dual Recording".
    Is the option to "Off" is the old engine for CI uses pictures.
    Does it mean the encrypted transmissions can only be seen and recorded on a transponder.
    The recordings will be stored unencrypted.
    The transponder overall record scrambled channels is not possible.
    If the option to "On" then the new engine is active, which means
    transponder can be made to record scrambled channels overall.
    The recordings are encrypted on the disk

    Improvements:
    - Fixed problem when the time synchronization channel was active, and many recordings were not started is fixed.
    - The general stability of the CI detection was improved.
    - Crashes in "TV System NTSC" setting fixed.
    - General Timer problems fixed.
    - Timer recording problems Unicable fixed
    (Background image was removed for Unicable that exclude only a temporary solution to defective recordings. It is
    worked out that a background recording again in the future is possible)
    - Canal Digital Cam Fixed
    - Fixed error in the grips with the language
    - Update channel lists for Astra

  2. #2
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: Vantage HD Firmware

    EMU Firmware 025701 for Vantage HD

    Allegedly, with this firmware a bit of running HD + Card
    be possible without the legacy module.
    However, it will not run properly stable.
    A start would be the same.


    Soft contain old today.
    So far everything Prima. Runs flawlessly with Sky V13 card.

    Attention:
    If update is from 025501, comes at the beginning of a message that just plays for the same software.
    This is probably a mistake.
    So confirm with YES.
    After the update, you can see in the system information,
    that it is really a question of 025701

    THX puempel

  3. #3
    Senior Member kiliantv's Avatar
    Join Date
    27-09-2007
    Posts
    239
    Uploads
    0

    Re: Vantage HD Firmware

    emu firmware vantage_hd+25501

    With this Vantage Emu works S1-S8 and SCT

    Testet by tom264

    >Install, than in Menü 9999, Box Reboot, than works.

  4. #4
    New Member
    Join Date
    19-10-2009
    Posts
    3
    Uploads
    0

    Thumbs up Re: Vantage HD Firmware

    ok super firmware!!!

  5. #5
    Junior Member
    Join Date
    15-06-2008
    Posts
    15
    Uploads
    0

    Re: Vantage HD Firmware

    Great receiver, great firmware. I wonder if CS features will ever come with these boxes ?

  6. #6
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: Vantage HD Firmware

    New Vantage HD-Firmware 02.58T-O

    04/03/2010 Version 02.58T-O
    Improvements:
    - Channel list update (ARD and ZDF HD now included in standard program list).
    - Unicable switch with 1 satellite and 8 outputs added by Kathrein
    - Fixed problem when switching on encrypted channels. Message "an encrypted channel" no longer comes.
    Attached Files Attached Files

  7. #7
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: Vantage HD Firmware

    19.03.2010

    Vantage HD Original Firmware


    Code:
    Main Firmware 01.02T-O BETA
    Attached Files Attached Files

  8. #8
    Moderator
    Join Date
    12-08-2008
    Posts
    1,362
    Uploads
    720

    Re: Vantage HD Firmware

    01/04/2010 Version 01.02T-O BETA2

    for VT-1 ( Full HD )

    Code:
    Improvements:
    - Fixed crashes caused by EPG Save
    - Astra TP 11,023 switched to DVB-S2
    - Child Safety Pin of locked channels is probed
    - Improved FTP connection
    Important
    Attached Files Attached Files

  9. #9
    New Member
    Join Date
    08-04-2009
    Location
    Belgium
    Posts
    8
    Uploads
    0

    Re: Vantage HD Firmware

    is there an EMU version available from the latest HD firmware (02.58)?

    I"m living in belgium and i'm using a card from tv vlaanderen with this device. The current emu firmware is somewhat unstable with some unpleasant crash/reboots and a lot of "encrypted channel" messages while browsing the channels.

  10. #10
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: Vantage HD Firmware

    Vantage HD Original Firmware

    10/04/2010 Main Firmware 01.02T-O BETA3

    for VT-1 ( Full HD )


    Improvements:
    - Bugfix inclusion
    o No fixed audio / video problem starting a timer in the background.
    - Channel List Update
    Attached Files Attached Files

Page 1 of 3 123 LastLast

Similar Threads

  1. Update Vantage Firmware
    By LeOnaSHeRMie in forum Vantage Firmware
    Replies: 270
    Last Post: 09-11-2011, 21:23:34
  2. New New EMU Firmware for Vantage HD
    By maosat in forum Vantage
    Replies: 1
    Last Post: 29-04-2009, 01:15:20
  3. Vantage HD 7100 orginal firmware
    By pola0 in forum Vantage Firmware
    Replies: 0
    Last Post: 27-04-2009, 15:40:02
  4. Vantage X121S CI - firmware problem
    By das in forum Vantage
    Replies: 0
    Last Post: 08-06-2008, 14:33:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •