Results 1 to 10 of 10

Thread: EMU Firmware Clarke-Tech 5100C

  1. #1
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    EMU Firmware Clarke-Tech 5100C

    Firmware CTECH5100C 102p (Emu)

    Release notes
    added cccam client

    ---------------------------------------------------------------------------
    Update steps !!
    1.Download software first wait until reboots.
    2.Download module_002p wait until reboots.
    3 Save your settings by USB or rs232
    4.Make a factory reset and switch OFF (maunpower switch on the rear)the receiver for around 1 minute.
    5.Receiver again turn on ,make an auto channel scan or upload the saved settings and make auto channel scan to upgrade the channellist etc...

    Now you can also used hidden menu 8281 !!
    More info about 8281 in the pdf document !



    ++Yabbervox++

  2. #2
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: EMU Firmware Clarke-Tech 5100C

    EMU Firmware for C-Tech HD 5100-C 117p
    S*k*Y*n*D*s***smartcard***freezer f_i_x_e_d

    +++Yabbervox++
    Attached Images Attached Images
    Attached Files Attached Files

  3. #3
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: Clark-Tech Firmware

    EMU Firmware for C-Tech HD 5100-C 120p

    TiVu*sat***smartcard***updating+activation fixed > note: not tested
    T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested

    CS server parameter file upload/download;
    Uploading / to store : In hidden menu 8281 > Press [GROUP] key on “Server List” menu.
    Downloading: Go to “Main menu” > “Storage” > “Data Transfer”. Press [OK] key on the filename in the file list.
    Server parameter file is a text file. You can edit it with any of text editor like windows “notepad.exe”.
    Look pdf document !!

    c c c a m fixed. Note: the c c c a m server displayed 2.0.11 ! But it is a patched 2.0.11 version !!


    +++Yabbervox+++
    Attached Files Attached Files

  4. #4

    Re: EMU Firmware Clarke-Tech 5100C

    EMU Firmware for C-Tech HD 5100/5000/5000C-CPlus Firmware

    1.patched:
    - C*a*n*a*l*S*a*t + *B*i*S*T*V ( note: only model SD TV )

    2.f_i_x_e_d support:

    - T*N*T*S*a*t (

    +++Yabbervox++
    Attached Files Attached Files

  5. #5
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: EMU Firmware Clarke-Tech 5100C

    F16 New Firmware 234p for Clarke Tech 5000 HD Combo Plus

    - Added support for DRE card mode multi protocol RS232
    - Output BISS (CAID = 2600) in the playback menu - assigning workers RDA yellow button
    - Activation ordered Kinoreysov 1, 2, 3 is now available in Reader
    - Further development of ergonomics and translation of some created from scratch
    - In the menu range is reduced inertia of the engine stop mode continuous movement after releasing the button, left and right on the remote
    has a status - alfa

    Not has the Italian language in the menu!

    NOTE:
    FW is not the usual team, so do not say "official"
    Not being official, is at your own risk installing
    this firmware!

    1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

    2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

    It 's always better before you do this and save the settings and softcam and reset the decoder!
    Attached Files Attached Files

  6. #6
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: EMU Firmware Clarke-Tech 5100C

    - HD+ Card problem fixed for 5000/5000C
    - TVGlobo(on Hotbird) fixed


    -- Yabbervox --
    Attached Files Attached Files

  7. #7
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: EMU Firmware Clarke-Tech 5100C

    - TVGlobo(on Hotbird) fixed
    - CCCAM updated
    - bulsat fixed
    - drecrypt card fixed
    -- Yabbervox --
    Attached Files Attached Files

  8. #8
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: EMU Firmware Clarke-Tech 5100C

    F16 New Firmware 239p for Clarke Tech 5000 HD Combo Plus

    -No comment....

    Not has the Italian language in the menu!

    NOTE: FW is not the usual team, so do not say "official"
    Not being official, is at your own risk installing this firmware!

    1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

    2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

    It 's always better before you do this and save the settings and softcam and reset the decoder!
    Attached Files Attached Files

  9. #9
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: EMU Firmware Clarke-Tech 5100C

    Firmware Clarke Tech 5000 HD Combo Plus

    F16 New Firmware 241p for Clarke Tech 5000 HD Combo Plus

    In the firmware test the following innovations:
    - A new loader 500, allows you to unload not only the setting of the stick, but the very firmware.
    - Unloading the setting of connections to external cards (CSinfo.txt) moved into the Software Update menu for convenience.
    - Updated infobar (double-Info): a brief conclusion EPG is combined with the withdrawal of the extended EPG for ease of reading the contents of transmission.
    - Updated default settings of satellites and transponders BISS keys (you need to reset all settings to the factory to start using them).
    - Faster access to the menu, the green button - no annoying windows with warnings.
    - Finalized mode Home balls through RS232: now uses a reliable manual selection mode receiver Master or Slave (Slave can be 6 doctors).
    - Added selection algorithm with external cards in problem situations (by default, both the repeat is advisable to keep switched off to avoid the possibility of obtaining ban):
    Retry = on / off (retry sending ECM after the end of time waiting for a response Timeout, with fast response and short time-out allows you to automatically detect the PID working or cid of several possible brute force with repetition);
    Reloud = on / off (re-authorize the connection in case of failure on the server, it is useful when connecting to newcamd compatible server type mpcs, oscam .....)
    - Amendments to working with Biss
    - In the mode spectrum of the total added output signal power to quickly pre-assess the degree of targeting to the satellite.
    - To further reduce response time to commands from the remote to navigate through the list of channels and on other menus. The doctor is a receiver with a really brisk menus.

    Not has the Italian language in the menu!


    Code:
    NOTE: FW is not the usual team, so do not say "official"
    Not being official, is at your own risk installing 
    this firmware!
    1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

    2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

    It 's always better before you do this and save the settings and softcam and reset the decoder!
    Attached Files Attached Files

  10. #10
    Super Moderator mikame's Avatar
    Join Date
    10-11-2007
    Posts
    3,817
    Uploads
    2,619

    Re: EMU Firmware Clarke-Tech 5100C

    patched version of :

    HD5100Cplus ver. 1.48 - 1.17 14-10-2011



    - important change in flashmemory !

    - NL teletext page 888 (subtitles) was fixed

    - added in AV settings Dutch subtitles

    - some fixes in timer recording

    - last used EPG mode stored

    - "Das Erste HD" subtitle fixed

    - added to choose Channel in Channel list in Group and the SAT/Favorite selection

    - some fixes in Hardstation


    +++ Yabbervox +++
    Attached Files Attached Files

Similar Threads

  1. EMU Firmware Clarke-Tech 6600SST
    By sami.sami in forum Clarke-Tech / Xtrend Images
    Replies: 15
    Last Post: 17-10-2011, 13:54:38
  2. EMU Firmware Clarke-Tech 5000
    By sami.sami in forum Clarke-Tech / Xtrend Images
    Replies: 20
    Last Post: 20-08-2010, 12:33:59
  3. Info Aggiornamento firmware Clarke Tech 5000
    By paolotto in forum Italian / Italiano
    Replies: 0
    Last Post: 15-12-2008, 18:44:34
  4. Clarke-Tech Setting by GioppyGio® Update 01/12/2008 per Plus e normal Clarke-Tech 310
    By GioppyGio in forum Clarke-Tech / Xtrend Software and Tools
    Replies: 0
    Last Post: 01-12-2008, 13:51:47
  5. firmware clarke tech 2000
    By boite001 in forum Dutch / Nederlands
    Replies: 0
    Last Post: 15-12-2007, 16:23:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •