Results 1 to 2 of 2

Thread: Newbie needs help - can't connect

  1. #1

    Newbie needs help - can't connect

    Hello,
    Just recently I started to get interested in the whole cardsharing thing and decided to get gbox 2.21b and the appropriate plug in for my ProgDVB to use it with SkyStart2. Now my problem is that i cannot connect to any of the few peers i have. I was actually able to connect to one peer for a little while but now can't do that either. My ports are forwarded (at least that's what i think, since I was able to connect the one time).
    Here is the output i get from Gbox Control V1.9 both j and h:

    Installing ioperm driver...
    Starting Gbox, please wait...

    gbox 2.1C/Windows&DOS@X86 ( Dec 6 2005, 22:53:21 )
    OSD (humax) IP = 192.168.0.100
    Seasonport=0 speed=9600
    mode 03
    AU:02/update:01/KeyFile:00 Hash:01 DispECM:02/EMM:02 UDPInit:00 OSD:00
    enx_conf = 3 ; reset on zap=0
    enx_conf = 3 ; reset on zap=0
    strange input data in cwshare.cfg, block version, pos 523
    trying to get online, please wait ...
    My IP myip ID 2DA1 (mydyndns) pass mypass, we are online
    IP peer1ip Port 12000-5555 ID 5760 pass peer1pass sharelevel 5/5 (peer1dns)
    IP peer2ip Port 12000-5555 ID 1FEF pass peer2pass sharelevel 5/5 (peer2dns)
    IP peer3ip Port 12000-2007 ID 0601 pass peer3pass sharelevel 5/5 (peer3dns)
    IP peer4ip Port 12000-8050 ID 82FE pass peer4pass sharelevel 1/1 (peer4dns)
    enx_conf = 3 ; reset on zap=0
    Total 1 ports to monitor
    monitoring port: 12000
    CPU 80X86 compatible
    /dev/ttyS0 opened with 1 multicam(s)
    File ./s2issuer.b not found
    File ./s2provid.b not found
    mode: any pid
    have to init card 3
    entering main loop
    ->HelloL to peer1dns (peer1ip)
    ->HelloL to peer2dns (peer2ip)
    ->HelloL to peer3dns (peer3ip)
    ->HelloL to peer4dns (peer4ip)
    ->Hello1 to peer1dns
    ->Hello1 to peer2dns
    ->Hello1 to peer3dns
    ->Hello1 to peer4dns
    ->Hello2 to peer1dns
    ->Hello2 to peer2dns
    ->Hello2 to peer3dns
    ->Hello2 to peer4dns
    ->Here? to peer1dns (peer1ip)
    **** hashTableECM 0 elements ****
    **** hashTableEMM 0 elements ****
    **** hashTableECM 0 elements ****
    **** hashTableEMM 0 elements ****
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    ->Here? to peer1dns (peer1ip)
    ->Here? to peer2dns (peer2ip)
    ->Here? to peer3dns (peer3ip)
    ->Here? to peer4dns (peer4ip)
    Ok, we are still online, our IP myip
    ...and so on in a loop

    The personal information were exchanged for obvious reasons
    I'm using Windows 7 if it makes any difference anything.
    I would be very grateful for any help.
    Thanks.

  2. #2
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Newbie needs help - can't connect

    Hi,
    strange input data in cwshare.cfg, block version, pos 523
    Fix this issue. you should check your cwshare.cfg if there is a mistake (froget ":" , or a "{" and so one) And check if your port 12000 is forwarded to the right local_IP (UDP & TCP) Regards, Arabeman14

Similar Threads

  1. Cant connect
    By exect in forum General Discussions: Cardsharing
    Replies: 0
    Last Post: 04-05-2009, 12:19:47
  2. Update Over 12m Spaniards connect to DTT
    By <<ELVIS>> in forum Daily Satellite TV News
    Replies: 0
    Last Post: 23-03-2009, 10:25:15
  3. i don't connect
    By mimililly in forum Introductions
    Replies: 4
    Last Post: 05-08-2008, 11:16:29
  4. I wil connect
    By karel00 in forum General Discussions: Cardsharing
    Replies: 4
    Last Post: 13-12-2007, 14:18:51
  5. how to connect pc and reciever
    By benzun_1999 in forum Starsat
    Replies: 2
    Last Post: 30-01-2006, 13:09:25

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •