Page 1 of 5 123 ... LastLast
Results 1 to 10 of 50

Thread: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

  1. #1
    Junior Member
    Join Date
    12-04-2010
    Posts
    20
    Uploads
    0

    Question Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Bonjour tout le monde,
    Après quelques galères, j'ai finalement réussi à monter mon serveur cccam sur mythbuntu mais je n'arrive pas à faire reconnaître ma carte sat Technotrend s2-1600 (saa7146) par mythtv.

    J'ai lu sur ce forum qu'elle fonctionnait nativement avec les drivers V4l depuis le kernel 2.6.28.
    Chez moi elle n'est pas reconnue par mythtv. En fait, le problème semble venir du fait le fichier frontend0 est absent de mon dossier /dev/dvb/adapter0 (il n'y a que demux0, dvr0 et net0). Ce fichier m'est demandé par dvbscan pour les tests:
    Code:
    $ dvbscan
    Failed to open frontend
    À part ça, la carte semble bien reconnue, et le driver chargé.
    J'ai ces modules actifs avec lsmod :
    Code:
    budget                 15375  1 
    budget_core             9632  1 budget
    saa7146                18116  2 budget,budget_core
    ttpci_eeprom            2076  1 budget_core
    dvb_core               87364  2 budget,budget_core
    Et ces lignes avec dmesg:
    Code:
    [    7.546688] saa7146: register extension 'budget dvb'.
    [    7.546741] budget dvb 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
    [    7.546764] IRQ 18/: IRQF_DISABLED is not guaranteed on shared IRQs
    [    7.546778] saa7146: found saa7146 @ mem e0b48000 (revision 1, irq 18) (0x13c2,0x101c).
    [    7.546787] saa7146 (0): dma buffer size 192512
    [    7.546789] DVB: registering new adapter (TT-Budget S2-1600 PCI)
    [    7.576225] lp0: using parport0 (interrupt-driven).
    [    7.587738] adapter has MAC addr = 00:d0:5c:cc:a7:73
    [    7.668846] ip_tables: (C) 2000-2006 Netfilter Core Team
    [    8.115181] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
    [    8.115189] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
    [    8.115225] Intel ICH 0000:00:06.0: setting latency timer to 64
    [    8.440074] intel8x0_measure_ac97_clock: measured 55090 usecs (2672 samples)
    [    8.440079] intel8x0: clocking to 47503
    [    8.653665] DVB: Unable to find symbol stv090x_attach()
    [    8.653678] BUG: unable to handle kernel NULL pointer dereference at 000000ac
    [    8.653683] IP: [<e0b30785>] dvb_frontend_detach+0x5/0x70 [dvb_core]
    [    8.653703] *pde = 00000000 
    [    8.653706] Oops: 0000 [#1] SMP 
    [    8.653709] last sysfs file: /sys/devices/pci0000:00/0000:00:06.0/sound/card0/pcmC0D0p/pcm_class
    [    8.653713] Modules linked in: snd_wavefront snd_cs4236 snd_intel8x0 snd_wss_lib snd_ac97_codec snd_opl3_lib ac97_bus snd_hwdep snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401 snd_mpu401_uart snd_seq_oss snd_seq_midi iptable_filter snd_rawmidi snd_seq_midi_event snd_seq ip_tables snd_timer budget(+) budget_core saa7146 ttpci_eeprom ppdev dvb_core i2c_nforce2 lp snd_seq_device parport_pc x_tables parport snd ns558 shpchp gameport soundcore snd_page_alloc usbhid skge radeon ttm drm i2c_algo_bit floppy ohci1394 ieee1394 nvidia_agp agpgart forcedeth
    [    8.653748] 
    [    8.653752] Pid: 646, comm: modprobe Not tainted (2.6.31-20-generic #58-Ubuntu) A7N8X-E
    [    8.653756] EIP: 0060:[<e0b30785>] EFLAGS: 00010246 CPU: 0
    [    8.653764] EIP is at dvb_frontend_detach+0x5/0x70 [dvb_core]
    [    8.653767] EAX: 00000000 EBX: ddd71000 ECX: ffffffc2 EDX: 00000000
    [    8.653770] ESI: 00000000 EDI: e0b45a10 EBP: deab9d84 ESP: deab9d7c
    [    8.653773]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    [    8.653776] Process modprobe (pid: 646, ti=deab8000 task=de9b0c90 task.ti=deab8000)
    [    8.653779] Stack:
    [    8.653780]  ddd71000 00000000 deab9dc8 e0b42ab3 e0b44110 e0b43e06 e0b0eb6a df8d2858
    [    8.653786] <0> e0b456cc 0002f000 00000000 e0b43802 ddd711d0 ddd714a8 ddd7109c e0b45a60
    [    8.653792] <0> ddd71000 df99f500 e0b45a10 deab9dfc e0b43861 e0b45aa0 e0b456cc 0000000a
    [    8.653799] Call Trace:
    [    8.653807]  [<e0b42ab3>] ? frontend_init+0x853/0xc50 [budget]
    [    8.653815]  [<e0b0eb6a>] ? ttpci_budget_init+0x29a/0x410 [budget_core]
    [    8.653821]  [<e0b43802>] ? budget_attach+0x22/0x140 [budget]
    [    8.653827]  [<e0b43861>] ? budget_attach+0x81/0x140 [budget]
    [    8.653835]  [<e0afd206>] ? saa7146_init_one+0x836/0x8d0 [saa7146]
    [    8.653844]  [<c01076f0>] ? dma_generic_alloc_coherent+0x0/0xc0
    [    8.653851]  [<c032c38e>] ? local_pci_probe+0xe/0x10
    [    8.653855]  [<c032d110>] ? pci_device_probe+0x60/0x80
    [    8.653860]  [<c03a68d0>] ? really_probe+0x50/0x140
    [    8.653866]  [<c0573bda>] ? _spin_lock_irqsave+0x2a/0x40
    [    8.653870]  [<c03a69d9>] ? driver_probe_device+0x19/0x20
    [    8.653874]  [<c03a6a59>] ? __driver_attach+0x79/0x80
    [    8.653881]  [<c03a5f28>] ? bus_for_each_dev+0x48/0x70
    [    8.653884]  [<c03a6799>] ? driver_attach+0x19/0x20
    [    8.653888]  [<c03a69e0>] ? __driver_attach+0x0/0x80
    [    8.653892]  [<c03a617f>] ? bus_add_driver+0xbf/0x2a0
    [    8.653896]  [<c032d050>] ? pci_device_remove+0x0/0x40
    [    8.653899]  [<c03a6ce5>] ? driver_register+0x65/0x120
    [    8.653903]  [<c0572a84>] ? mutex_lock+0x14/0x40
    [    8.653907]  [<c032d330>] ? __pci_register_driver+0x40/0xb0
    [    8.653913]  [<e0afbdbe>] ? saa7146_register_extension+0x4e/0x90 [saa7146]
    [    8.653919]  [<e0b1b00d>] ? budget_init+0xd/0xf [budget]
    [    8.653922]  [<c010112c>] ? do_one_initcall+0x2c/0x190
    [    8.653928]  [<e0b1b000>] ? budget_init+0x0/0xf [budget]
    [    8.653935]  [<c0173781>] ? sys_init_module+0xb1/0x1f0
    [    8.653939]  [<c01033ac>] ? syscall_call+0x7/0xb
    [    8.653941] Code: 90 90 90 90 90 90 55 89 e5 8b 45 0c 39 d0 7c 06 29 d0 5d c3 66 90 05 40 42 0f 00 29 d0 5d c3 8d b4 26 00 00 00 00 55 89 e5 56 53 <8b> 90 ac 00 00 00 89 c3 85 d2 74 0d ff d2 8b 83 ac 00 00 00 e8 
    [    8.653972] EIP: [<e0b30785>] dvb_frontend_detach+0x5/0x70 [dvb_core] SS:ESP 0068:deab9d7c
    [    8.653983] CR2: 00000000000000ac
    [    8.653986] ---[ end trace 7502b1799564c47d ]---
    J'ai essayé d'installer manuellement les derniers drivers v4l (en désactivant au passage firedtv et et61x251 avec make menuconfig, qui créaient des erreurs) mais cela ne change rien.
    Je n'ai toujours pas de fichier frontend0 après redémarrage.

    Savez-vous comment ce frontend0 devrait être créé ? Et d'où peut provenir l'erreur ? udev ?
    Je suis à court d'idées...

    Merci d'avance.

  2. #2
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Quote Originally Posted by radeonpoiuy View Post
    Bonjour tout le monde,
    Après quelques galères, j'ai finalement réussi à monter mon serveur cccam sur mythbuntu mais je n'arrive pas à faire reconnaître ma carte sat Technotrend s2-1600 (saa7146) par mythtv.

    J'ai lu sur ce forum qu'elle fonctionnait nativement avec les drivers V4l depuis le kernel 2.6.28.
    Chez moi elle n'est pas reconnue par mythtv. En fait, le problème semble venir du fait le fichier frontend0 est absent de mon dossier /dev/dvb/adapter0 (il n'y a que demux0, dvr0 et net0). Ce fichier m'est demandé par dvbscan pour les tests:
    Et ces lignes avec dmesg:
    Code:
    ...
    [    8.653665] DVB: Unable to find symbol stv090x_attach()
    [    8.653678] BUG: unable to handle kernel NULL pointer dereference at 000000ac
    [    8.653683] IP: [<e0b30785>] dvb_frontend_detach+0x5/0x70 [dvb_core]
    [    8.653703] *pde = 00000000 
    [    8.653706] Oops: 0000 [#1] SMP 
    [    8.653709] last sysfs file: /sys/devices/pci0000:00/0000:00:06.0/sound/card0/pcmC0D0p/pcm_class
    [    8.653713] Modules linked in: snd_wavefront snd_cs4236 snd_intel8x0 snd_wss_lib snd_ac97_codec snd_opl3_lib ac97_bus snd_hwdep snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401 snd_mpu401_uart snd_seq_oss snd_seq_midi iptable_filter snd_rawmidi snd_seq_midi_event snd_seq ip_tables snd_timer budget(+) budget_core saa7146 ttpci_eeprom ppdev dvb_core i2c_nforce2 lp snd_seq_device parport_pc x_tables parport snd ns558 shpchp gameport soundcore snd_page_alloc usbhid skge radeon ttm drm i2c_algo_bit floppy ohci1394 ieee1394 nvidia_agp agpgart forcedeth
    [    8.653748] 
    [    8.653752] Pid: 646, comm: modprobe Not tainted (2.6.31-20-generic #58-Ubuntu) A7N8X-E
    [    8.653756] EIP: 0060:[<e0b30785>] EFLAGS: 00010246 CPU: 0
    [    8.653764] EIP is at dvb_frontend_detach+0x5/0x70 [dvb_core]
    [    8.653767] EAX: 00000000 EBX: ddd71000 ECX: ffffffc2 EDX: 00000000
    [    8.653770] ESI: 00000000 EDI: e0b45a10 EBP: deab9d84 ESP: deab9d7c
    [    8.653773]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    [    8.653776] Process modprobe (pid: 646, ti=deab8000 task=de9b0c90 task.ti=deab8000)
    [    8.653779] Stack:
    [    8.653780]  ddd71000 00000000 deab9dc8 e0b42ab3 e0b44110 e0b43e06 e0b0eb6a df8d2858
    [    8.653786] <0> e0b456cc 0002f000 00000000 e0b43802 ddd711d0 ddd714a8 ddd7109c e0b45a60
    [    8.653792] <0> ddd71000 df99f500 e0b45a10 deab9dfc e0b43861 e0b45aa0 e0b456cc 0000000a
    [    8.653799] Call Trace:
    [    8.653807]  [<e0b42ab3>] ? frontend_init+0x853/0xc50 [budget]
    [    8.653815]  [<e0b0eb6a>] ? ttpci_budget_init+0x29a/0x410 [budget_core]
    [    8.653821]  [<e0b43802>] ? budget_attach+0x22/0x140 [budget]
    [    8.653827]  [<e0b43861>] ? budget_attach+0x81/0x140 [budget]
    [    8.653835]  [<e0afd206>] ? saa7146_init_one+0x836/0x8d0 [saa7146]
    [    8.653844]  [<c01076f0>] ? dma_generic_alloc_coherent+0x0/0xc0
    [    8.653851]  [<c032c38e>] ? local_pci_probe+0xe/0x10
    [    8.653855]  [<c032d110>] ? pci_device_probe+0x60/0x80
    [    8.653860]  [<c03a68d0>] ? really_probe+0x50/0x140
    [    8.653866]  [<c0573bda>] ? _spin_lock_irqsave+0x2a/0x40
    [    8.653870]  [<c03a69d9>] ? driver_probe_device+0x19/0x20
    [    8.653874]  [<c03a6a59>] ? __driver_attach+0x79/0x80
    [    8.653881]  [<c03a5f28>] ? bus_for_each_dev+0x48/0x70
    [    8.653884]  [<c03a6799>] ? driver_attach+0x19/0x20
    [    8.653888]  [<c03a69e0>] ? __driver_attach+0x0/0x80
    [    8.653892]  [<c03a617f>] ? bus_add_driver+0xbf/0x2a0
    [    8.653896]  [<c032d050>] ? pci_device_remove+0x0/0x40
    [    8.653899]  [<c03a6ce5>] ? driver_register+0x65/0x120
    [    8.653903]  [<c0572a84>] ? mutex_lock+0x14/0x40
    [    8.653907]  [<c032d330>] ? __pci_register_driver+0x40/0xb0
    [    8.653913]  [<e0afbdbe>] ? saa7146_register_extension+0x4e/0x90 [saa7146]
    [    8.653919]  [<e0b1b00d>] ? budget_init+0xd/0xf [budget]
    [    8.653922]  [<c010112c>] ? do_one_initcall+0x2c/0x190
    [    8.653928]  [<e0b1b000>] ? budget_init+0x0/0xf [budget]
    [    8.653935]  [<c0173781>] ? sys_init_module+0xb1/0x1f0
    [    8.653939]  [<c01033ac>] ? syscall_call+0x7/0xb
    [    8.653941] Code: 90 90 90 90 90 90 55 89 e5 8b 45 0c 39 d0 7c 06 29 d0 5d c3 66 90 05 40 42 0f 00 29 d0 5d c3 8d b4 26 00 00 00 00 55 89 e5 56 53 <8b> 90 ac 00 00 00 89 c3 85 d2 74 0d ff d2 8b 83 ac 00 00 00 e8 
    [    8.653972] EIP: [<e0b30785>] dvb_frontend_detach+0x5/0x70 [dvb_core] SS:ESP 0068:deab9d7c
    [    8.653983] CR2: 00000000000000ac
    [    8.653986] ---[ end trace 7502b1799564c47d ]---
    Salut,

    Regarde le dmesg, tu as un probleme de configutration de ton kernel.
    pourras-tu poster le resultat de ceci:
    Code:
    cat /usr/src/linux/.config |grep -i DVB_STV09
    
    cat /usr/src/linux/.config |grep -i MEDIA_ATTACH
    PS: tu pourras aussi profiter pour upgrader ton kernel

    cordialement

  3. #3
    Junior Member
    Join Date
    12-04-2010
    Posts
    20
    Uploads
    0

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Salut, et merci de ta réponse rapide.
    Heu... quand j'essaie les commandes, il ne me trouve pas le dossier.
    Code:
    cccam@serveur-mythbuntu:~$ cat /usr/src/linux/.config |grep -i DVB_STV09
    cat: /usr/src/linux/.config: No such file or directory
    cccam@serveur-mythbuntu:~$ cat /usr/src/linux/.config |grep -i MEDIA_ATTACH
    cat: /usr/src/linux/.config: No such file or directory
    Ce ne serait pas parce que je n'ai pas téléchargé les sources pour compiler tout le kernel ? J'ai juste installé v4l...
    (J'en ai peut-être pas l'air mais je suis un complet noob )

    Quand j'essaie de regarder les kernels dispo, il me propose :
    Code:
    cccam@serveur-mythbuntu:~$ apt-cache search linux-image
    linux-image-2.6.31-14-386 - Linux kernel image for version 2.6.31 on i386
    linux-image-2.6.31-14-generic - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-14-generic-pae - Linux kernel image for version 2.6.31 on x86
    linux-image-2.6.31-14-virtual - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-302-ec2 - Linux kernel image for version 2.6.31 on x86/x86_64
    alsa-base - Fichiers de configuration du pilote ALSA
    linux-image-2.6.31-9-rt - Linux kernel image for version 2.6.31 on Ingo Molnar's full real time preemption patch
    linux-image-rt - Rt Linux kernel image
    rt2400-source - source for rt2400 wireless network driver
    rt2500-source - source for rt2500 wireless network driver
    rt2570-source - source for rt2570 wireless network driver
    linux-image - Generic Linux kernel image.
    linux-image-2.6.31-15-386 - Linux kernel image for version 2.6.31 on i386
    linux-image-2.6.31-15-generic - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-15-generic-pae - Linux kernel image for version 2.6.31 on x86
    linux-image-2.6.31-15-virtual - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-16-386 - Linux kernel image for version 2.6.31 on i386
    linux-image-2.6.31-16-generic - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-16-generic-pae - Linux kernel image for version 2.6.31 on x86
    linux-image-2.6.31-16-virtual - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-17-386 - Linux kernel image for version 2.6.31 on i386
    linux-image-2.6.31-17-generic - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-17-generic-pae - Linux kernel image for version 2.6.31 on x86
    linux-image-2.6.31-17-virtual - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-19-386 - Linux kernel image for version 2.6.31 on i386
    linux-image-2.6.31-19-generic - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-19-generic-pae - Linux kernel image for version 2.6.31 on x86
    linux-image-2.6.31-19-virtual - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-20-386 - Linux kernel image for version 2.6.31 on i386
    linux-image-2.6.31-20-generic - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-20-generic-pae - Linux kernel image for version 2.6.31 on x86
    linux-image-2.6.31-20-virtual - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-304-ec2 - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-2.6.31-305-ec2 - Linux kernel image for version 2.6.31 on x86/x86_64
    linux-image-386 - Generic Linux kernel image
    linux-image-ec2 - Linux kernel image for ec2 machines
    linux-image-generic - Generic Linux kernel image
    linux-image-generic-pae - Generic Linux kernel image
    linux-image-server - Linux kernel image on Server Equipment.
    linux-image-virtual - Linux kernel image for virtual machines
    J'ai déjà la 2.6.31.20.
    Il me semble qu'on en est au 2.6.33 stable. Est-ce que la fonction search linux-image se donne de la marge ou c'est une incompatibilité avec mon matériel ?
    Si je peux upgrader, il vaudrait mieux compiler ou je peux récupérer le kernel 2.6.33 tout fait ?

  4. #4
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Salut,

    Si tu souhaite recompiler (ce qui est très bien instructif et permet d'optimiser ta machine) regardes ceci: www.kernel-seeds.org/ etre utile pour comprendre des petites choses et aider a bien configurer www.kernel-seeds.org/working.html.
    autrement, si j'ai compris tu as un kernel générique proposé par ta distribe. Je penses donc que le module est bien présent.
    le probleme pourrait venir de la config de udev.

    il faut etre root (ou sudo) et dans /etc/udev/scripts/ tu vas créer un fichier dvb.sh

    voila le contenu de dvb.sh:
    Code:
    #!/bin/sh
    /bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,'
    une fois créer, tu vas rendre le script exécutable:
    Code:
    chmod +x /etc/udev/scripts/dvb.sh
    après dans tu vas regarder dans /etc/udev/udev.conf où doit se trouver les "rule" . Il y a des grandes chances que ce soit dans /etc/udev/rules.d/
    donc tu vas créer un fichier dvb.rule dans /etc/udev/rules.d/

    voila le contenu de dvb.rule:
    Code:
    KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c"
    Relance ton PC et donne nous des nouvelles.

    cordialement.

  5. #5
    Junior Member
    Join Date
    12-04-2010
    Posts
    20
    Uploads
    0

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Merci pour tes tuyaux arabeman14, ça me permet d'apprendre linux.
    Mais ça ne semble pas régler le problème...
    Je ne pense pas m'être planté dans les manips. Le seul détail, c'est qu'il n'y avait rien d'écrit dans udev.conf qui référait à rules.d mais le répertoire existait, donc je me suis dit qu'il fonctionnait par défaut.

    J'ai aussi essayé d'installer le noyau générique 2.6.33 avec le tuto de ce site : http://www.ramoonus.nl/2010/02/25/li...-ubuntu-linux/.
    Mais il ne parvient pas à démarrer en interface graphique, simplement en ligne de commande.
    Je soupçonne un probleme de carte graphique car il m'a affiché ça à l'install :
    Code:
    W: Possible missing firmware /lib/firmware/2.6.33-020633-generic/radeon/R700_rlc.bin for module radeon
    W: Possible missing firmware /lib/firmware/2.6.33-020633-generic/radeon/R600_rlc.bin for module radeon
    Sinon, au démarrage en mode console, il m'affiche en dernier (impossible de voir s'il y a d'autres erreurs plus haut), avant de me dmander de me logger :
    Code:
    Warning: unable to find a suitable fs in /proc/mounts, is it mounted?
    Use --subdomains to override.
    Donc je suis revenu sous 2.6.31.
    Si je veux persévérer dans cette voie, je suppose qu'il faudra compiler...

    Sinon, le problème semble venir des modules stv0903 et /ou stv6110, qui gèrent le frontend de cette carte (infos v4l-wiki) et qui ne sont pas actifs dans ma config, comme me l'on souligné les membres du forum mythtv_fr.

  6. #6
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    salut,

    il faut donc charger la source 2.6.31 et recompiler 2.6.31 ton kernel.
    cordialement.

  7. #7
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    RE,

    As tu des nouvelles?

    Merci

  8. #8
    Junior Member
    Join Date
    12-04-2010
    Posts
    20
    Uploads
    0

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    RE,

    As tu des nouvelles?

    Merci
    Oui et non, désolé de pas avoir répondu plus tôt. Je bosse sur plusieurs trucs en même temps donc c'est un peu galère.
    J'ai essayé pas mal de choses : nouvelle install de v4l avec d'autres réglages, forcer le chargement des modules stv6110 et stv0900... Mais pas la recompil du kernel car il faut que je lise un peu la doc pour configurer avant de le faire et je manque de temps.
    Sinon, je pensais peut-être upgrader tout simplement ubuntu qui sort en v10.04 dans deux jours avec un kernel 2.6.32.
    Le problème vient bien du module stv090x selon la première ligne de mon dmesg mais je ne m'y connais pas assez pour cerner davantage le problème.
    Je te donne des nouvelles dès que je trouve un moment pour upgrader et/ou recompiler.
    Merci pour ton aide.

  9. #9
    Junior Member
    Join Date
    12-04-2010
    Posts
    20
    Uploads
    0

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Bonjour, me revoilà.
    Bon, bien j'ai installé ubuntu 10.04 avec le nouveau kernel et ça ne change rien. Il doit y avoir une obscure incompatibilité matérielle quelque part. Je ne sais pas si une recompil apporterait quelquechose de plus. Il faudrait que je trouve ce qui pose problème exactement et mes compétences sont un peu limitées là...
    A tout hasard, j'ai refait un dmesg et je le poste au complet.
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    [    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.2 present.
    [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-FFFFF uncachable
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FE0000000 write-back
    [    0.000000]   1 base 0E0000000 mask FFC000000 write-combining
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] Scanning 0 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
    [    0.000000]  modified: 0000000000010000 - 00000000000a0000 (usable)
    [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000001fff0000 (usable)
    [    0.000000]  modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
    [    0.000000]  modified: 000000001fff3000 - 0000000020000000 (ACPI data)
    [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  modified: 00000000ffff0000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 001fc00000 page 2M
    [    0.000000]  001fc00000 - 001fff0000 page 4k
    [    0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-15000
    [    0.000000] RAMDISK: 1789f000 - 18033c37
    [    0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia)
    [    0.000000] ACPI: RSDT 1fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: FACP 1fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: DSDT 1fff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
    [    0.000000] ACPI: FACS 1fff0000 00040
    [    0.000000] ACPI: APIC 1fff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 511MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1fff0000
    [    0.000000]   low ram: 0 - 1fff0000
    [    0.000000]   node 0 low ram: 00000000 - 1fff0000
    [    0.000000]   node 0 bootmap 00011000 - 00015000
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
    [    0.000000]   #4 [001789f000 - 0018033c37]          RAMDISK ==> [001789f000 - 0018033c37]
    [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
    [    0.000000]   #6 [00008da000 - 00008dd141]              BRK ==> [00008da000 - 00008dd141]
    [    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
    [    0.000000]   #8 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x0001fff0
    [    0.000000]   HighMem  0x0001fff0 -> 0x0001fff0
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[2] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x000000a0
    [    0.000000]     0: 0x00000100 -> 0x0001fff0
    [    0.000000] On node 0 totalpages: 130944
    [    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3952 pages, LIFO batch:0
    [    0.000000]   Normal zone: 992 pages used for memmap
    [    0.000000]   Normal zone: 125968 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
    [    0.000000] If you got timer trouble try acpi_use_timer_override
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] ACPI: IRQ14 used by override.
    [    0.000000] ACPI: IRQ15 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304
    [    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=75dcd54a-ac1a-463b-880c-9bb347108d90 ro quiet splash
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 2620800 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 500400k/524224k available (4673k kernel code, 22972k reserved, 2122k data, 656k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
    [    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
    [    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:256
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2162.735 MHz processor.
    [    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4325.47 BogoMIPS (lpj=8650940)
    [    0.008026] Security Framework initialized
    [    0.008053] AppArmor: AppArmor initialized
    [    0.008062] Mount-cache hash table entries: 512
    [    0.008199] Initializing cgroup subsys ns
    [    0.008203] Initializing cgroup subsys cpuacct
    [    0.008208] Initializing cgroup subsys memory
    [    0.008218] Initializing cgroup subsys devices
    [    0.008221] Initializing cgroup subsys freezer
    [    0.008223] Initializing cgroup subsys net_cls
    [    0.008243] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.008246] CPU: L2 Cache: 512K (64 bytes/line)
    [    0.008251] mce: CPU supports 4 MCE banks
    [    0.008268] Performance Events: AMD PMU driver.
    [    0.008280] ... version:                0
    [    0.008282] ... bit width:              48
    [    0.008284] ... generic registers:      4
    [    0.008286] ... value mask:             0000ffffffffffff
    [    0.008288] ... max period:             00007fffffffffff
    [    0.008291] ... fixed-purpose events:   0
    [    0.008293] ... event mask:             000000000000000f
    [    0.008297] Checking 'hlt' instruction... OK.
    [    0.024482] SMP alternatives: switching to UP code
    [    0.029974] Freeing SMP alternatives: 19k freed
    [    0.029998] ACPI: Core revision 20090903
    [    0.036913] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.036922] ftrace: allocating 21771 entries in 43 pages
    [    0.040131] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.040518] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [    0.083020] CPU0: AMD Athlon(tm) XP 3000+ stepping 00
    [    0.084001] Brought up 1 CPUs
    [    0.084001] Total of 1 processors activated (4325.47 BogoMIPS).
    [    0.084001] CPU0 attaching NULL sched-domain.
    [    0.084001] devtmpfs: initialized
    [    0.084001] regulator: core version 0.5
    [    0.084001] Time:  9:31:59  Date: 04/30/10
    [    0.084001] NET: Registered protocol family 16
    [    0.084001] EISA bus registered
    [    0.084001] ACPI: bus type pci registered
    [    0.113016] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
    [    0.113019] PCI: Using configuration type 1 for base access
    [    0.114017] bio: create slab <bio-0> at 0
    [    0.114840] ACPI: EC: Look up EC in DSDT
    [    0.120911] ACPI: Interpreter enabled
    [    0.120919] ACPI: (supports S0 S1 S4 S5)
    [    0.120943] ACPI: Using IOAPIC for interrupt routing
    [    0.128303] ACPI: No dock devices found.
    [    0.128400] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.128452] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
    [    0.128469] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
    [    0.128674] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
    [    0.128709] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [    0.128714] pci 0000:00:01.1: PME# disabled
    [    0.128745] pci 0000:00:02.0: reg 10 32bit mmio: [0xe9087000-0xe9087fff]
    [    0.128780] pci 0000:00:02.0: supports D1 D2
    [    0.128782] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.128786] pci 0000:00:02.0: PME# disabled
    [    0.128813] pci 0000:00:02.1: reg 10 32bit mmio: [0xe9082000-0xe9082fff]
    [    0.128847] pci 0000:00:02.1: supports D1 D2
    [    0.128849] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.128853] pci 0000:00:02.1: PME# disabled
    [    0.128886] pci 0000:00:02.2: reg 10 32bit mmio: [0xe9083000-0xe90830ff]
    [    0.128927] pci 0000:00:02.2: supports D1 D2
    [    0.128929] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.128933] pci 0000:00:02.2: PME# disabled
    [    0.128967] pci 0000:00:04.0: reg 10 32bit mmio: [0xe9086000-0xe9086fff]
    [    0.128973] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe007]
    [    0.129004] pci 0000:00:04.0: supports D1 D2
    [    0.129006] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.129010] pci 0000:00:04.0: PME# disabled
    [    0.129037] pci 0000:00:05.0: reg 10 32bit mmio: [0xe9000000-0xe907ffff]
    [    0.129071] pci 0000:00:05.0: supports D1 D2
    [    0.129097] pci 0000:00:06.0: reg 10 io port: [0xe400-0xe4ff]
    [    0.129103] pci 0000:00:06.0: reg 14 io port: [0xd000-0xd07f]
    [    0.129109] pci 0000:00:06.0: reg 18 32bit mmio: [0xe9080000-0xe9080fff]
    [    0.129137] pci 0000:00:06.0: supports D1 D2
    [    0.129202] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f]
    [    0.129250] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe9084000-0xe90847ff]
    [    0.129257] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe9085000-0xe908503f]
    [    0.129288] pci 0000:00:0d.0: supports D1 D2
    [    0.129291] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.129295] pci 0000:00:0d.0: PME# disabled
    [    0.129383] pci 0000:01:04.0: reg 10 32bit mmio: [0xe8000000-0xe8003fff]
    [    0.129391] pci 0000:01:04.0: reg 14 io port: [0x9000-0x90ff]
    [    0.129419] pci 0000:01:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
    [    0.129443] pci 0000:01:04.0: supports D1 D2
    [    0.129445] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.129450] pci 0000:01:04.0: PME# disabled
    [    0.129484] pci 0000:01:0a.0: reg 10 32bit mmio: [0xe8004000-0xe80041ff]
    [    0.129553] pci 0000:01:0b.0: reg 10 io port: [0x9400-0x9407]
    [    0.129561] pci 0000:01:0b.0: reg 14 io port: [0x9800-0x9803]
    [    0.129569] pci 0000:01:0b.0: reg 18 io port: [0x9c00-0x9c07]
    [    0.129577] pci 0000:01:0b.0: reg 1c io port: [0xa000-0xa003]
    [    0.129584] pci 0000:01:0b.0: reg 20 io port: [0xa400-0xa40f]
    [    0.129592] pci 0000:01:0b.0: reg 24 32bit mmio: [0xe8005000-0xe80051ff]
    [    0.129600] pci 0000:01:0b.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
    [    0.129620] pci 0000:01:0b.0: supports D1 D2
    [    0.129655] pci 0000:00:08.0: bridge io port: [0x9000-0xafff]
    [    0.129659] pci 0000:00:08.0: bridge 32bit mmio: [0xe7000000-0xe8ffffff]
    [    0.129696] pci 0000:03:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
    [    0.129702] pci 0000:03:00.0: reg 14 io port: [0xc000-0xc0ff]
    [    0.129709] pci 0000:03:00.0: reg 18 32bit mmio: [0xe6000000-0xe600ffff]
    [    0.129725] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
    [    0.129745] pci 0000:03:00.0: supports D1 D2
    [    0.129775] pci 0000:03:00.1: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
    [    0.129782] pci 0000:03:00.1: reg 14 32bit mmio: [0xe6010000-0xe601ffff]
    [    0.129814] pci 0000:03:00.1: supports D1 D2
    [    0.129854] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
    [    0.129858] pci 0000:00:1e.0: bridge 32bit mmio: [0xe5000000-0xe6ffffff]
    [    0.129862] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xc0000000-0xdfffffff]
    [    0.129872] pci_bus 0000:00: on NUMA node 0
    [    0.129877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.129998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [    0.130246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
    [    0.180292] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.180423] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.180553] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.180681] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.180808] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.180937] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.181072] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    [    0.181200] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    [    0.181329] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.181457] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    [    0.181729] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.181858] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.181986] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.182120] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.182246] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.182374] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.182492] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
    [    0.182595] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
    [    0.182697] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
    [    0.182799] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
    [    0.182901] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    [    0.183060] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
    [    0.183213] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
    [    0.183365] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
    [    0.183524] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
    [    0.183682] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
    [    0.183834] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
    [    0.183940] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
    [    0.184100] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
    [    0.184253] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
    [    0.184410] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
    [    0.184563] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
    [    0.184705] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.184709] vgaarb: loaded
    [    0.184846] SCSI subsystem initialized
    [    0.184944] libata version 3.00 loaded.
    [    0.185040] usbcore: registered new interface driver usbfs
    [    0.185054] usbcore: registered new interface driver hub
    [    0.185088] usbcore: registered new device driver usb
    [    0.185245] ACPI: WMI: Mapper loaded
    [    0.185247] PCI: Using ACPI for IRQ routing
    [    0.185434] NetLabel: Initializing
    [    0.185436] NetLabel:  domain hash size = 128
    [    0.185438] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.185454] NetLabel:  unlabeled traffic allowed by default
    [    0.185487] Switching to clocksource tsc
    [    0.187794] AppArmor: AppArmor Filesystem Enabled
    [    0.187823] pnp: PnP ACPI init
    [    0.187848] ACPI: bus type pnp registered
    [    0.191315] pnp: PnP ACPI: found 16 devices
    [    0.191317] ACPI: ACPI bus type pnp unregistered
    [    0.191322] PnPBIOS: Disabled by ACPI PNP
    [    0.191336] system 00:00: ioport range 0x4000-0x407f has been reserved
    [    0.191339] system 00:00: ioport range 0x4080-0x40ff has been reserved
    [    0.191342] system 00:00: ioport range 0x4400-0x447f has been reserved
    [    0.191346] system 00:00: ioport range 0x4480-0x44ff has been reserved
    [    0.191349] system 00:00: ioport range 0x4200-0x427f has been reserved
    [    0.191352] system 00:00: ioport range 0x4280-0x42ff has been reserved
    [    0.191358] system 00:01: ioport range 0x5000-0x503f has been reserved
    [    0.191361] system 00:01: ioport range 0x5500-0x553f has been reserved
    [    0.191368] system 00:02: iomem range 0xdb800-0xdbfff has been reserved
    [    0.191372] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
    [    0.191375] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
    [    0.191379] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
    [    0.191382] system 00:02: iomem range 0x1fff0000-0x1fffffff could not be reserved
    [    0.191386] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
    [    0.191389] system 00:02: iomem range 0x0-0x9ffff could not be reserved
    [    0.191393] system 00:02: iomem range 0x100000-0x1ffeffff could not be reserved
    [    0.191396] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.191400] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
    [    0.191407] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
    [    0.226144] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
    [    0.226148] pci 0000:00:08.0:   IO window: 0x9000-0xafff
    [    0.226154] pci 0000:00:08.0:   MEM window: 0xe7000000-0xe8ffffff
    [    0.226159] pci 0000:00:08.0:   PREFETCH window: 0x20000000-0x200fffff
    [    0.226167] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    [    0.226170] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
    [    0.226175] pci 0000:00:1e.0:   MEM window: 0xe5000000-0xe6ffffff
    [    0.226179] pci 0000:00:1e.0:   PREFETCH window: 0xc0000000-0xdfffffff
    [    0.226193] pci 0000:00:08.0: setting latency timer to 64
    [    0.226202] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.226205] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.226208] pci_bus 0000:01: resource 0 io:  [0x9000-0xafff]
    [    0.226211] pci_bus 0000:01: resource 1 mem: [0xe7000000-0xe8ffffff]
    [    0.226214] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff]
    [    0.226217] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
    [    0.226220] pci_bus 0000:03: resource 1 mem: [0xe5000000-0xe6ffffff]
    [    0.226223] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xdfffffff]
    [    0.226263] NET: Registered protocol family 2
    [    0.226361] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.226678] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.226847] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.227007] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.227010] TCP reno registered
    [    0.227079] NET: Registered protocol family 1
    [    0.282525] pci 0000:03:00.0: Boot video device
    [    0.282716] cpufreq-nforce2: Detected nForce2 chipset revision C1
    [    0.282719] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
    [    0.282728] cpufreq-nforce2: FSB currently at 165 MHz, FID 13.0
    [    0.282750] Marking TSC unstable due to cpufreq changes
    [    0.284467] Scanning for low memory corruption every 60 seconds
    [    0.284571] audit: initializing netlink socket (disabled)
    [    0.284583] type=2000 audit(1272619918.282:1): initialized
    [    0.293527] Switching to clocksource acpi_pm
    [    0.293624] Trying to unpack rootfs image as initramfs...
    [    0.308229] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.309920] VFS: Disk quotas dquot_6.5.2
    [    0.309980] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.310597] fuse init (API version 7.13)
    [    0.310689] msgmni has been set to 978
    [    0.316542] alg: No test for stdrng (krng)
    [    0.316618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.316622] io scheduler noop registered
    [    0.316624] io scheduler anticipatory registered
    [    0.316626] io scheduler deadline registered
    [    0.316682] io scheduler cfq registered (default)
    [    0.316833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.316857] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.316975] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    0.316981] ACPI: Power Button [PWRB]
    [    0.317054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.317058] ACPI: Power Button [PWRF]
    [    0.317443] processor LNXCPU:00: registered as cooling_device0
    [    0.324297] isapnp: Scanning for PnP cards...
    [    0.330119] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.330242] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    0.330351] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [    0.330684] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    0.330825] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [    0.336281] brd: module loaded
    [    0.336863] loop: module loaded
    [    0.337001] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [    0.337255] pata_acpi 0000:00:09.0: setting latency timer to 64
    [    0.337623] Fixed MDIO Bus: probed
    [    0.337664] PPP generic driver version 2.4.2
    [    0.337712] tun: Universal TUN/TAP device driver, 1.6
    [    0.337715] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.337798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.338129] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [    0.338135]   alloc irq_desc for 22 on node -1
    [    0.338138]   alloc kstat_irqs on node -1
    [    0.338147] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22
    [    0.338168] ehci_hcd 0000:00:02.2: setting latency timer to 64
    [    0.338172] ehci_hcd 0000:00:02.2: EHCI Host Controller
    [    0.338221] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    [    0.338255] ehci_hcd 0000:00:02.2: debug port 1
    [    0.338264] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
    [    0.338286] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe9083000
    [    0.382147] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
    [    0.382264] usb usb1: configuration #1 chosen from 1 choice
    [    0.382298] hub 1-0:1.0: USB hub found
    [    0.382310] hub 1-0:1.0: 6 ports detected
    [    0.382376] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.382635] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
    [    0.382639]   alloc irq_desc for 21 on node -1
    [    0.382641]   alloc kstat_irqs on node -1
    [    0.382646] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
    [    0.382656] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    0.382659] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    0.382706] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    [    0.382729] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe9087000
    [    0.474260] usb usb2: configuration #1 chosen from 1 choice
    [    0.474299] hub 2-0:1.0: USB hub found
    [    0.474316] hub 2-0:1.0: 3 ports detected
    [    0.474727] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
    [    0.474734]   alloc irq_desc for 20 on node -1
    [    0.474737]   alloc kstat_irqs on node -1
    [    0.474746] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20
    [    0.474768] ohci_hcd 0000:00:02.1: setting latency timer to 64
    [    0.474771] ohci_hcd 0000:00:02.1: OHCI Host Controller
    [    0.474825] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    [    0.474860] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe9082000
    [    0.566058] usb usb3: configuration #1 chosen from 1 choice
    [    0.566098] hub 3-0:1.0: USB hub found
    [    0.566112] hub 3-0:1.0: 3 ports detected
    [    0.566192] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.566306] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    0.566309] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    0.567131] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.572269] mice: PS/2 mouse device common for all mice
    [    0.572448] rtc_cmos 00:06: RTC can wake from S4
    [    0.572507] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [    0.572539] rtc0: alarms up to one year, y3k, 242 bytes nvram
    [    0.572658] device-mapper: uevent: version 1.0.3
    [    0.572803] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    0.572870] device-mapper: multipath: version 1.1.0 loaded
    [    0.572874] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    0.575794] EISA: Probing bus 0 at eisa.0
    [    0.575817] Cannot allocate resource for EISA slot 4
    [    0.575820] Cannot allocate resource for EISA slot 5
    [    0.575835] EISA: Detected 0 cards.
    [    0.575941] cpuidle: using governor ladder
    [    0.575943] cpuidle: using governor menu
    [    0.576455] TCP cubic registered
    [    0.576637] NET: Registered protocol family 10
    [    0.577109] lo: Disabled Privacy Extensions
    [    0.577423] NET: Registered protocol family 17
    [    0.577466] powernow-k8: Processor cpuid 6a0 not supported
    [    0.577488] Using IPI No-Shortcut mode
    [    0.577605] PM: Resume from disk failed.
    [    0.577623] registered taskstats version 1
    [    0.577933]   Magic number: 6:672:526
    [    0.578053] rtc_cmos 00:06: setting system clock to 2010-04-30 09:31:59 UTC (1272619919)
    [    0.578057] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.578059] EDD information not available.
    [    0.598716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [    0.762585] Freeing initrd memory: 7763k freed
    [    0.902304] isapnp: No Plug & Play device found
    [    0.902325] Freeing unused kernel memory: 656k freed
    [    0.903117] Write protecting the kernel text: 4676k
    [    0.903150] Write protecting the kernel read-only data: 1840k
    [    0.924342] udev: starting version 151
    [    1.028083] usb 2-2: new low speed USB device using ohci_hcd and address 2
    [    1.113675] Floppy drive(s): fd0 is 1.44M
    [    1.132071] FDC 0 is a post-1991 82077
    [    1.159882] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [    1.160253] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    [    1.160260] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
    [    1.160266] forcedeth 0000:00:04.0: setting latency timer to 64
    [    1.160323] nv_probe: set workaround bit for reversed mac addr
    [    1.173630] sata_sil 0000:01:0b.0: version 2.4
    [    1.173876] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    [    1.173882]   alloc irq_desc for 18 on node -1
    [    1.173885]   alloc kstat_irqs on node -1
    [    1.173894] sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
    [    1.186463] scsi0 : sata_sil
    [    1.186778] scsi1 : sata_sil
    [    1.186897] ata1: SATA max UDMA/100 mmio m512@0xe8005000 tf 0xe8005080 irq 18
    [    1.186901] ata2: SATA max UDMA/100 mmio m512@0xe8005000 tf 0xe80050c0 irq 18
    [    1.187299] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [    1.187305]   alloc irq_desc for 17 on node -1
    [    1.187308]   alloc kstat_irqs on node -1
    [    1.187317] skge 0000:01:04.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
    [    1.187372] skge 1.13 addr 0xe8000000 irq 17 chip Yukon-Lite rev 7
    [    1.188158] skge eth0: addr 00:11:2f:97:ab:8f
    [    1.243131] usb 2-2: configuration #1 chosen from 1 choice
    [    1.508055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [    1.516372] ata1.00: ATA-7: SAMSUNG HD161HJ, JF100-22, max UDMA7
    [    1.516376] ata1.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    1.524374] ata1.00: configured for UDMA/100
    [    1.524518] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD161HJ  JF10 PQ: 0 ANSI: 5
    [    1.524699] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.524975] sd 0:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
    [    1.525033] sd 0:0:0:0: [sda] Write Protect is off
    [    1.525037] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.525067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.525243]  sda: sda1 sda2 < sda5 sda6 > sda3
    [    1.559529] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.681037] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:11:2f:97:9f:5e
    [    1.681041] forcedeth 0000:00:04.0: timirq lnktim desc-v1
    [    1.681069] pata_amd 0000:00:09.0: version 0.4.1
    [    1.681132] pata_amd 0000:00:09.0: setting latency timer to 64
    [    1.681417] scsi2 : pata_amd
    [    1.681545] scsi3 : pata_amd
    [    1.682327] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.682331] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.844037] ata2: SATA link down (SStatus 0 SControl 310)
    [    1.964345] ata3.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L15, max UDMA/33
    [    1.964376] ata3.01: ATAPI: LITE-ON DVDRW LDW-851S, GS0F, max UDMA/33
    [    1.964402] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
    [    1.964408] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
    [    1.980279] ata3.00: configured for UDMA/33
    [    1.996277] ata3.01: configured for UDMA/33
    [    2.000471] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L15 PQ: 0 ANSI: 5
    [    2.008213] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
    [    2.008217] Uniform CD-ROM driver Revision: 3.20
    [    2.008489] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [    2.008642] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [    2.009524] scsi 2:0:1:0: CD-ROM            LITE-ON  DVDRW LDW-851S   GS0F PQ: 0 ANSI: 5
    [    2.013422] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [    2.013666] sr 2:0:1:0: Attached scsi CD-ROM sr1
    [    2.013786] sr 2:0:1:0: Attached scsi generic sg2 type 5
    [    2.193294] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
    [    2.193303] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21
    [    2.193309] ohci1394 0000:00:0d.0: setting latency timer to 64
    [    2.196253] usbcore: registered new interface driver hiddev
    [    2.202431] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4
    [    2.202571] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-2/input0
    [    2.202607] usbcore: registered new interface driver usbhid
    [    2.202610] usbhid: v2.6:USB HID core driver
    [    2.250028] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[e9084000-e90847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
    [    2.470294] EXT3-fs: INFO: recovery required on readonly filesystem.
    [    2.470298] EXT3-fs: write access will be enabled during recovery.
    [    3.122720] kjournald starting.  Commit interval 5 seconds
    [    3.122737] EXT3-fs: recovery complete.
    [    3.123065] EXT3-fs: mounted filesystem with ordered data mode.
    [    3.361966] ohci1394: fw-host0: SelfID received outside of bus reset sequence
    [    3.632151] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000a0b839]
    [    5.671898] Adding 1494004k swap on /dev/sda5.  Priority:-1 extents:1 across:1494004k 
    [    5.780260] Adding 1510036k swap on /dev/sda6.  Priority:-2 extents:1 across:1510036k 
    [    5.883459] EXT3 FS on sda1, internal journal
    [    5.922773] udev: starting version 151
    [    6.653563] lp: driver loaded but no devices found
    [    6.724295] i2c i2c-0: nForce2 SMBus adapter at 0x5000
    [    6.724321] i2c i2c-1: nForce2 SMBus adapter at 0x5500
    [    6.727250] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    6.731087] Linux agpgart interface v0.103
    [    6.802794] parport_pc 00:0c: reported by Plug and Play ACPI
    [    6.802864] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [    6.821667] agpgart: Detected NVIDIA nForce2 chipset
    [    6.831039] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
    [    6.885557] lp0: using parport0 (interrupt-driven).
    [    6.944913] ppdev: user-space parallel port driver
    [    6.945829] [drm] Initialized drm 1.1.0 20060810
    [    6.945990] gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 59659kHz
    [    7.312626] saa7146: register extension 'budget dvb'.
    [    7.312842] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    [    7.312848]   alloc irq_desc for 16 on node -1
    [    7.312851]   alloc kstat_irqs on node -1
    [    7.312860] budget dvb 0000:01:0a.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
    [    7.312886] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
    [    7.312919] saa7146: found saa7146 @ mem e08f6000 (revision 1, irq 16) (0x13c2,0x101c).
    [    7.312927] saa7146 (0): dma buffer size 192512
    [    7.312930] DVB: registering new adapter (TT-Budget S2-1600 PCI)
    [    7.350169] adapter has MAC addr = 00:d0:5c:cc:a7:73
    [    7.381162] type=1505 audit(1272619926.301:2):  operation="profile_load" pid=590 name="/sbin/dhclient3"
    [    7.381470] type=1505 audit(1272619926.301:3):  operation="profile_load" pid=590 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [    7.381632] type=1505 audit(1272619926.301:4):  operation="profile_load" pid=590 name="/usr/lib/connman/scripts/dhclient-script"
    [    7.725500] type=1505 audit(1272619926.645:5):  operation="profile_load" pid=605 name="/usr/sbin/ntpd"
    [    8.130582] [drm] radeon defaulting to kernel modesetting.
    [    8.130588] [drm] radeon kernel modesetting enabled.
    [    8.130841] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [    8.130848]   alloc irq_desc for 19 on node -1
    [    8.130850]   alloc kstat_irqs on node -1
    [    8.130859] radeon 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
    [    8.141279] [drm] radeon: Initializing kernel modesetting.
    [    8.141367] [drm] register mmio base: 0xE6000000
    [    8.141369] [drm] register mmio size: 65536
    [    8.142015] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
    [    8.142032] [drm] Generation 2 PCI interface, using max accessible memory
    [    8.142041] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
    [    8.142059] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
    [    8.142129] radeon 0000:03:00.0: putting AGP V3 device into 8x mode
    [    8.142138] [drm] radeon: VRAM 256M
    [    8.142140] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
    [    8.142142] [drm] radeon: GTT 64M
    [    8.142144] [drm] radeon: GTT from 0xE0000000 to 0xE3FFFFFF
    [    8.142180] [drm] radeon: irq initialized.
    [    8.142297] [drm] Detected VRAM RAM=256M, BAR=256M
    [    8.142303] [drm] RAM width 128bits DDR
    [    8.142411] [TTM] Zone  kernel: Available graphics memory: 254622 kiB.
    [    8.142434] [drm] radeon: 256M of VRAM memory ready
    [    8.142437] [drm] radeon: 64M of GTT memory ready.
    [    8.142684] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
    [    8.142696] [drm] radeon: cp idle (0x10000C03)
    [    8.142750] [drm] Loading R300 Microcode
    [    8.143204] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
    [    8.255656] DVB: Unable to find symbol stv090x_attach()
    [    8.255718] BUG: unable to handle kernel NULL pointer dereference at 000000ac
    [    8.255853] IP: [<e08e4d8a>] dvb_frontend_detach+0xa/0x70 [dvb_core]
    [    8.255959] *pde = 00000000 
    [    8.256009] Oops: 0000 [#1] SMP 
    [    8.256009] last sysfs file: /sys/devices/platform/radeon_cp.0/firmware/radeon_cp.0/loading
    [    8.256009] Modules linked in: snd_seq_midi(+) snd_rawmidi snd_seq_midi_event radeon(+) budget(+) snd_seq budget_core ttm snd_timer saa7146 drm_kms_helper ttpci_eeprom snd_seq_device ppdev drm i2c_algo_bit dvb_core ns558 nvidia_agp snd parport_pc soundcore gameport shpchp i2c_nforce2 agpgart snd_page_alloc lp parport usbhid ohci1394 hid pata_amd ieee1394 skge sata_sil forcedeth floppy
    [    8.256009] 
    [    8.256009] Pid: 563, comm: modprobe Not tainted (2.6.32-21-generic #32-Ubuntu) A7N8X-E
    [    8.256009] EIP: 0060:[<e08e4d8a>] EFLAGS: 00010246 CPU: 0
    [    8.256009] EIP is at dvb_frontend_detach+0xa/0x70 [dvb_core]
    [    8.256009] EAX: 00000000 EBX: ddaac800 ECX: ffffffc2 EDX: 00000000
    [    8.256009] ESI: 00000000 EDI: e0c48850 EBP: ddb3bd78 ESP: ddb3bd70
    [    8.256009]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    [    8.256009] Process modprobe (pid: 563, ti=ddb3a000 task=de6b8000 task.ti=ddb3a000)
    [    8.256009] Stack:
    [    8.256009]  ddaac800 00000000 ddb3bdbc e0c46acb e0c48174 e0c47e6a e0b1fbbf df8f6858
    [    8.256009] <0> e0c48510 0002f000 00000000 e0c47867 ddaaca38 ddaacd10 ddaac89c e0c488a0
    [    8.256009] <0> ddaac800 de631d00 e0c48850 ddb3bdf0 e0c478c6 e0c488e0 e0c48510 0000000a
    [    8.256009] Call Trace:
    [    8.256009]  [<e0c46acb>] ? frontend_init+0x85b/0xc60 [budget]
    [    8.256009]  [<e0b1fbbf>] ? ttpci_budget_init+0x29f/0x410 [budget_core]
    [    8.256009]  [<e0c47867>] ? budget_attach+0x27/0x140 [budget]
    [    8.256009]  [<e0c478c6>] ? budget_attach+0x86/0x140 [budget]
    [    8.256009]  [<e0917f8c>] ? saa7146_init_one+0x7dc/0x860 [saa7146]
    [    8.256009]  [<c01078d0>] ? dma_generic_alloc_coherent+0x0/0xc0
    [    8.256009]  [<c0363883>] ? local_pci_probe+0x13/0x20
    [    8.256009]  [<c0364688>] ? pci_device_probe+0x68/0x90
    [    8.256009]  [<c03e684d>] ? really_probe+0x4d/0x140
    [    8.256009]  [<c03ed15e>] ? pm_runtime_barrier+0x4e/0xc0
    [    8.256009]  [<c03e697c>] ? driver_probe_device+0x3c/0x60
    [    8.256009]  [<c03e6a21>] ? __driver_attach+0x81/0x90
    [    8.256009]  [<c03e5e63>] ? bus_for_each_dev+0x53/0x80
    [    8.256009]  [<c03e671e>] ? driver_attach+0x1e/0x20
    [    8.256009]  [<c03e69a0>] ? __driver_attach+0x0/0x90
    [    8.256009]  [<c03e60e5>] ? bus_add_driver+0xd5/0x280
    [    8.256009]  [<c03645c0>] ? pci_device_remove+0x0/0x40
    [    8.256009]  [<c03e6d1a>] ? driver_register+0x6a/0x130
    [    8.256009]  [<c03648c5>] ? __pci_register_driver+0x45/0xb0
    [    8.256009]  [<e0916e13>] ? saa7146_register_extension+0x53/0x90 [saa7146]
    [    8.256009]  [<e0c4c00d>] ? budget_init+0xd/0xf [budget]
    [    8.256009]  [<c0101131>] ? do_one_initcall+0x31/0x190
    [    8.256009]  [<e0c4c000>] ? budget_init+0x0/0xf [budget]
    [    8.256009]  [<c0182340>] ? sys_init_module+0xb0/0x210
    [    8.256009]  [<c01033ec>] ? syscall_call+0x7/0xb
    [    8.256009] Code: 29 d0 5d c3 90 8d 74 26 00 05 40 42 0f 00 29 d0 5d c3 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90 55 89 e5 56 53 0f 1f 44 00 00 <8b> 90 ac 00 00 00 89 c3 85 d2 74 0d ff d2 8b 83 ac 00 00 00 e8 
    [    8.256009] EIP: [<e08e4d8a>] dvb_frontend_detach+0xa/0x70 [dvb_core] SS:ESP 0068:ddb3bd70
    [    8.256009] CR2: 00000000000000ac
    [    8.264276] ---[ end trace 263af66ddb68ca18 ]---
    [    8.279575] [drm] radeon: ring at 0x00000000E0000000
    [    8.279657] [drm] ring test succeeded in 0 usecs
    [    8.323350] [drm] radeon: ib pool ready.
    [    8.323505] [drm] ib test succeeded in 0 usecs
    [    8.324927] [drm] Default TV standard: NTSC
    [    8.324987] [drm] 27.000000000 MHz TV ref clk
    [    8.325044] [drm] DFP table revision: 4
    [    8.326054] [drm] Default TV standard: NTSC
    [    8.326112] [drm] 27.000000000 MHz TV ref clk
    [    8.326326] [drm] Radeon Display Connectors
    [    8.326382] [drm] Connector 0:
    [    8.326435] [drm]   VGA
    [    8.326488] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    [    8.326544] [drm]   Encoders:
    [    8.326597] [drm]     CRT1: INTERNAL_DAC1
    [    8.326651] [drm] Connector 1:
    [    8.326704] [drm]   DVI-I
    [    8.326756] [drm]   HPD1
    [    8.326808] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
    [    8.326864] [drm]   Encoders:
    [    8.326917] [drm]     CRT2: INTERNAL_DAC2
    [    8.326971] [drm]     DFP1: INTERNAL_TMDS1
    [    8.327025] [drm] Connector 2:
    [    8.327077] [drm]   S-video
    [    8.327129] [drm]   Encoders:
    [    8.327182] [drm]     TV1: INTERNAL_DAC2
    [    8.508477] [drm] fb mappable at 0xC0040000
    [    8.508538] [drm] vram apper at 0xC0000000
    [    8.508592] [drm] size 9216000
    [    8.508645] [drm] fb depth is 24
    [    8.508698] [drm]    pitch is 7680
    [    8.509658] fb0: radeondrmfb frame buffer device
    [    8.509717] registered panic notifier
    [    8.509777] [drm] Initialized radeon 2.0.0 20080528 for 0000:03:00.0 on minor 0
    [    8.612280] vga16fb: initializing
    [    8.612344] vga16fb: mapped to 0xc00a0000
    [    8.612402] vga16fb: not registering due to another framebuffer present
    [    9.070498] Console: switching to colour frame buffer device 240x75
    [    9.685658] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
    [    9.685825] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
    [    9.686083] Intel ICH 0000:00:06.0: setting latency timer to 64
    [   10.012042] intel8x0_measure_ac97_clock: measured 52909 usecs (2568 samples)
    [   10.012242] intel8x0: clocking to 47469
    [   14.397933] type=1505 audit(1272619933.477:6):  operation="profile_replace" pid=940 name="/sbin/dhclient3"
    [   14.398368] type=1505 audit(1272619933.477:7):  operation="profile_replace" pid=940 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   14.398558] type=1505 audit(1272619933.477:8):  operation="profile_replace" pid=940 name="/usr/lib/connman/scripts/dhclient-script"
    [   14.822227] type=1505 audit(1272619933.901:9):  operation="profile_load" pid=941 name="/usr/bin/evince"
    [   14.827247] type=1505 audit(1272619933.905:10):  operation="profile_load" pid=941 name="/usr/bin/evince-previewer"
    [   14.830123] type=1505 audit(1272619933.909:11):  operation="profile_load" pid=941 name="/usr/bin/evince-thumbnailer"
    [   15.045919] type=1505 audit(1272619934.125:12):  operation="profile_load" pid=945 name="/usr/sbin/mysqld"
    [   15.048529] type=1505 audit(1272619934.129:13):  operation="profile_replace" pid=947 name="/usr/sbin/ntpd"
    [   15.325625] type=1505 audit(1272619934.405:14):  operation="profile_load" pid=948 name="/usr/sbin/tcpdump"
    [   15.375654] skge eth0: enabling interface
    [   15.379325] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   19.972021] eth1: no IPv6 routers present
    [   26.792048] end_request: I/O error, dev fd0, sector 0
    [   26.824035] end_request: I/O error, dev fd0, sector 0
    [   82.468354] ondemand governor failed, too long transition latency of HW, fallback to performance governor
    [  100.681088] out of order segment: rcv_next 33C223B4 seq 33C22954 - 33C229E7
    [  101.168880] ofo requeuing : rcv_next 33C22954 seq 33C22954 - 33C229E7
    [  282.408844] out of order segment: rcv_next 9DF9EDAD seq 9DF9FE8D - 9DFA042D
    [  282.581709] out of order segment: rcv_next 9DF9EDAD seq 9DFA042D - 9DFA09CD
    [  282.740690] out of order segment: rcv_next 9DF9EDAD seq 9DFA09CD - 9DFA0F6D
    [  282.862489] out of order segment: rcv_next 9DF9EDAD seq 9DFA0F6D - 9DFA150D
    [  282.982064] out of order segment: rcv_next 9DF9EDAD seq 9DFA150D - 9DFA181D
    [  283.076288] out of order segment: rcv_next 9DF9EDAD seq 9DFA181D - 9DFA1DBD
    [  283.338468] ofo requeuing : rcv_next 9DF9FE8D seq 9DF9FE8D - 9DFA042D
    [  283.338475] ofo requeuing : rcv_next 9DFA042D seq 9DFA042D - 9DFA09CD
    [  283.338478] ofo requeuing : rcv_next 9DFA09CD seq 9DFA09CD - 9DFA0F6D
    [  283.338481] ofo requeuing : rcv_next 9DFA0F6D seq 9DFA0F6D - 9DFA150D
    [  283.338484] ofo requeuing : rcv_next 9DFA150D seq 9DFA150D - 9DFA181D
    [  283.338486] ofo requeuing : rcv_next 9DFA181D seq 9DFA181D - 9DFA1DBD
    [  332.352646] out of order segment: rcv_next 33C27964 seq 33C27F04 - 33C2805D
    [  332.737150] ofo requeuing : rcv_next 33C27F04 seq 33C27F04 - 33C2805D
    L'erreur précédente est toujours présente (8.255656). Mais j'ai remarqué qu'il y a quelques lignes plus haut sur le saa7146. Ca ne peut pas poser problème, ça ? =>
    Code:
    [    7.312886] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
    Cordialement.

  10. #10
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Technotrend s2-1600 : pas de frontend0 (mythbuntu 9.10)

    Salut,

    c'est vraiment étrange que le kernel générique d'ubuntu ne support pas ta carte !
    pourras-tu poster le resultat de
    Code:
     zcat /proc/config.gz |grep -i stv09
    Si non, on pourra peut être compiler un nouveau kernel adapté a ton matos ;)
    dans cet objectif, que dis :
    Code:
     cat /etc/fstab
    Code:
     cat /proc/cpuinfo
    Code:
     lspci -kn
    As tu gcc d'installé pour la compile, si oui pourras-tu me donner la version?

    cordialement

Page 1 of 5 123 ... LastLast

Similar Threads

  1. Replies: 1
    Last Post: 24-11-2009, 21:55:55
  2. قنــــــــــــــاة Polsat Film
    By فارس سيناره in forum Arabic / عربي
    Replies: 0
    Last Post: 25-09-2009, 05:10:15
  3. جــديــد عــربــســات و مــدار نــايــل
    By فارس سيناره in forum Arabic / عربي
    Replies: 0
    Last Post: 21-09-2009, 05:32:39
  4. مـساعــــــــــــــــدة
    By عملاق الكرة in forum Arabic / عربي
    Replies: 1
    Last Post: 11-09-2009, 15:08:12
  5. مـساعــــــــــــــــدة
    By عملاق الكرة in forum Arabic / عربي
    Replies: 4
    Last Post: 07-09-2009, 15:57:02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •