Results 1 to 2 of 2

Thread: Vu+ Settings Backup Tool

  1. #1
    Administrator wahid's Avatar
    Join Date
    14-04-2008
    Location
    M.S.T.
    Posts
    8,561
    Uploads
    2,422

    Vu+ Settings Backup Tool

    Vu+ Settings Backup Tool


    Code:
    This util will make a backup of your Vu+ settings, Channel List, Satellites, Dish Positions, Radio Stations, Favourites, Timezone.
    
    Unzip Instructions
    
    Unzip all the files including the "enigma2" & "tuxbox" folders in this zip to your local HDD.
    Be sure to tick the box "Use Folder Names" or "Extract Full Paths" depending on your Zip Utility.
    File structure should look like this on your Hard Disk after unzipping.
    
    enigma2 (folder)
    tuxbox (folder)
    Instructions.txt (this file)
    Vu_Settings_backup.exe (Main Program)
    
    If you don't see the "enigma2" & "tuxbox" folders then you've unzipped the files incorrectly and the application won't
    function without them.
    
    Instructions
    
    To get the IP number of the Vu+ Press Menu on Vu+ Remote Control.
    Select Setup and Press OK
    Select System and Press OK
    Select Network and Press OK
    Select Network Test and Press OK
    
    This will show the Vu+ IP Address, example 192.168.1.7
    
    Program Instructions
    
    1. Run the Vu_Settings_backup.exe program.
    2. Enter the IP address of your Vu+ in the IP Address field
    3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank.
    4. Click Connect Button
    
    Now click on BACKUP button.
    This will backup all the settings files from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
    The /enigma2 and /tuxbox folders are located in the same folder as this program.
    
    To RESTORE your Vu+ settings after flashing a new Image simply do the following.
    
    1. Run the Vu_Settings_backup.exe program.
    2. Enter the IP address of your Vu+ in the IP Address field
    3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank.
    4. Click Connect Button
    
    Now click on the RESTORE button.
    
    All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
    Once the files have successfully been restored you'll need to reboot the receiver by powering off and on using the switch on
    the back of the receiver.
    thanks Lee.
    Attached Files Attached Files

  2. #2
    Administrator wahid's Avatar
    Join Date
    14-04-2008
    Location
    M.S.T.
    Posts
    8,561
    Uploads
    2,422

    Re: Vu+ Settings Backup Tool

    Vu+ Settings Backup Tool V1.2


    This util will make a backup of your Vu+ settings, Channel List, Satellites, Dish Positions, Radio Stations, Favourites, Timezone.

    Unzip Instructions

    Unzip all the files in this archive to your local HDD.

    Instructions
    ------------------

    To get the IP number of the Vu+ Press Menu on Vu+ Remote Control.
    Select Setup and Press OK
    Select System and Press OK
    Select Network and Press OK
    Select Network Test and Press OK

    This will show the Vu+ IP Address, example 192.168.1.7

    Program Instructions
    ---------------------------------

    1. Run the Vu_Settings_backup.exe program.
    2. Enter the IP address of your Vu+ in the IP Address field
    3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank.
    4. Click Connect Button

    Now click on BACKUP button.
    This will backup all the settings files from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
    The /enigma2 and /tuxbox folders will be created in the same folder as this program.

    To RESTORE your Vu+ settings after flashing a new Image simply do the following.

    1. Run the Vu_Settings_backup.exe program.
    2. Enter the IP address of your Vu+ in the IP Address field
    3. If you have changed the password on your receiver, enter the password in the password field otherwise leave blank.
    4. Click Connect Button

    Now click on the RESTORE button.

    All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
    Once the files have successfully been restored you'll need to reboot the receiver by powering off and on using the switch on
    the back of the receiver.

    Version History
    V1.2 Released 2 June 2010 |Application now creates enigma2 and tuxbox folders on the local HDD before backing up the settings.
    V1.1 Released 20 May 2010 |Minor bug fixed.
    V1.0 Released 19 May 2010
    Thanks lee
    Attached Files Attached Files

Similar Threads

  1. DM 600 backup Gemini 4.60 CCcam 2.1.3 NoTimeBomp Backup By Servet
    By Lujdzo in forum Dreambox DM 600 PVR Images
    Replies: 2
    Last Post: 13-12-2011, 20:48:46
  2. Vu+ Settings Backup Tool V1.2 by Lee
    By aguda in forum Vu+ Settings
    Replies: 0
    Last Post: 02-06-2010, 19:14:00
  3. Backup settings
    By drspiros in forum AZBox
    Replies: 0
    Last Post: 11-04-2010, 10:23:45
  4. Backup user settings Edision Trojan
    By megasasser in forum Edision
    Replies: 1
    Last Post: 13-09-2009, 18:43:08
  5. VANTAGE 2xx_Series Settings by CYRUS® SETTINGS TEAM
    By pola0 in forum Vantage Information and Tutorials
    Replies: 0
    Last Post: 20-07-2008, 22:52:53

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •