Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Coolstream HD-1 Original Firmware

  1. #1
    VIP Member aamir11's Avatar
    Join Date
    01-07-2008
    Posts
    756
    Uploads
    347

    Coolstream HD-1 Original Firmware

    Coolstream HD-1 Original Firmware 20.06.2010 v 1.81

    Software Update Wizard - Agreement

    Do not perform updates using any data other than the official update data from our website.
    Using Software Updates You expressly acknowledge and agree that use of this Software is at
    your own risk.
    In no event shall Coolstream LTD be liable for any damages whatsever.

    ----------------------------------------------------------------------------------

    Warning:

    This release will upgrade your Kernel on first boot if not already done!!!
    Please dont power off your receiver bevore Upgrade is done!
    -----------------------------------------------------------------------------------
    20.06.2010

    - aac record playback for movieplayer
    - some fixes for FP driver
    - First Setup changes
    - improve Updates check

    Download Here

    OR

    Download Here

  2. #2
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: Coolstream HD-1 Original Firmware

    Original Coolstream Image 23.08.2010 CR1.87

    Software Update Wizard - Agreement

    Do not perform updates using any data other than the official update data from our website.
    Using Software Updates You expressly acknowledge and agree that use of this Software is at
    your own risk.
    In no event shall Coolstream LTD be liable for any damages whatsever.

    ----------------------------------------------------------------------------------

    Warning:

    This release will upgrade your Kernel on first boot if not already done!!!
    Please dont power off your receiver bevore Upgrade is done!
    -----------------------------------------------------------------------------------
    23.08.2010

    Critical Update for version 1.86
    - "OSD HIDE" using EPG PLUS fixed
    - Show Infobar on EPG event change

    DOWNLOAD IMAGE

  3. #3
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Coolstream HD-1 Original Firmware

    Keywelt V1.4 Oktober 2010

    Neues Keywelt V1.4

    Dank an Snowhead und seine Crew


    Code:
    http://www.megaupload.com/?d=9B51L9JW

  4. #4
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Coolstream HD-1 Original Firmware

    EmuMod 25.10.10 by blackman

    Tag zusammen,

    nun ist es endlich soweit, viele haben bereits bei mir nachgefragt...

    Stelle hier ein angepasstes Originalimage zur Verfügung, eine Art EmuMod, wie es sie bereits früher gegeben hat.

    Das Image basiert auf dem Originalimage Version 1.92 vom 22.10.10.

    Es wurden folgende Modifikationen vorgenommen:


    1- Neutrino von nox, SVN Stand: 854
    2- Image-Style im "holzfreaky"-Design
    3- eigenes Flex-Menü mit einigen Funktionen (blaue Taste)
    4- Emu-Menü (Oscam, Newcs, Gbox & Mgcamd wählbar)
    5- erweiterter Infobar
    6- Yweb: Version 2.8.0.8
    7- Werbezapper
    8- HDD-Menü
    9- diverse PlugIn's by rvk, theobald123, SnowHead, GetAway & Co
    10- RSS-Feeds Unterstützung
    11- THX für Crypticons und Emu-Anzeige aus dem Boxcracker Image, schaut doch auch mal auf www.bxc.tv vorbei...
    12- "Hardcore" Senderlogos by Luj++
    13- 3D Senderlogos by Enterhaken
    14- msgbox, input, getrc, shellexec by SnowHead
    15- aktuelle Luj++ Settings Astra & Hotbird
    16- alter Treiber, sodass die HD+ Karte immer noch läuft
    17- andere kleinere Anpassungen
    18- Fehler innerhalb des alten EmuMod-Images behoben
    Bitte flasht zunächst das aktuellste Onlineimage.
    Dann könnt ihr das Image ganz normal flashen, per FTP oder über einen USB-Stick.

    Die Emu's sind vorprogrammiert auf Conax-Karten (Newcs) und bei Oscam sollte die S02 intern laufen, die ORF-Cryptoworks im Smargo, bei der NEO zusätzlich noch im oberen Kartenschacht die HD+.
    Die Gbox unterstützt ebenfalls die S02, allerdings müsst ihr hier natürlich noch eure persönliche Camident in der nagra-Datei eintragen...
    Sie können alle im Emu-Menü aktiviert werden.
    Ihr könnt natürlich aber auch eure eigenen Configs per FTP oder mit Hilfe des Oscam Config Creators einspielen.

    Das Flex-Menü findet ihr unter der blauen Taste, ist dann eigentlich soweit selbsterklärend.

    Der Webbrowser ist im Image wegen seiner Größe nicht enthalten, wer will kann ihn sich ja gerne manuell einspielen.

    Erklärung zum Camdstatus in der Infobar:

    - Grau: Emu ist im Image nicht verfügbar
    - Gelb: Emu ist im Image verfügbar
    - Grün: Emu ist aktiv

    Neu: Es ist nun möglich zwischen den breiten Senderlogos und den 3D Senderlogos (am besten für die Nummernbox geeignet) im Flex-Menü umzuschalten.

    Imagefüllstand: 84%

    Generell habe ich versucht soviele eurer Wünsche, wie nur möglich umzusetzen, aber bedenkt, dass dies hier alles auf Basis des Originalimages läuft und somit manche Sachen schlicht unmöglich sind.

    Getestet mit der NEO und der HD1(BSE).

    Einen großen Dank an alle Leute, deren Sachen in meinem Image zur Verfügung gestellt sind und an die, die mich bei der Zusammenstellung unterstützt haben. :danke

    Über ein kleines Feedback würde ich mich freuen.



    Und hier noch ein paar Bilder:



    Code:
    http://www.megaupload.com/?d=CPHFZPZA
    Attached Images Attached Images

  5. #5
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Coolstream HD-1 Original Firmware

    Neues original Coolstream Image 1.97

    Code:
    08.02.2011 
    
    - Internal CA recording/timeshifting enabled
    - Add AAC audio support for fileplayer
    - Update to new video driver to avoid unsync on H264 SD amos channels
    - Fix Video Auto modes on re-starting App
    - many changes in the UI
    new update edit 3:50



    original Coolstream Image 1.97

  6. #6
    Senior Member
    Join Date
    15-06-2010
    Posts
    109
    Uploads
    41

    Re: Coolstream HD-1 Original Firmware

    ]Coolstream HD-1 Original Firmware 2.00
    Code:
    Software Update Wizard - Agreement
    Do not perform updates using any data other than the official update data from our website.
    Using Software Updates You expressly acknowledge and agree that use of this  Software is at 
    your own risk. 
    In no event shall Coolstream LTD be liable for any damages whatsever. 
    Contact info@coolstreamtech.com for any questions about our Software.
    ----------------------------------------------------------------------------------
    Warning:
    This File will renew the Software and you will lose the old Settings,
    to keep old Setting please use Partial Updates in the Software List
    if available(simple_update.txt Section).You must have version 1.90 or
    higher already installed.
    This release will upgrade your Kernel on first boot if not already done!!!
    Please dont power off your receiver bevore Upgrade is done!
    -----------------------------------------------------------------------------------
    19.03.2011
    * Add wlan menu for realtek chipsets,8712_8188_8191_8192
    You can setup your realtek wlan usb adapter under Settings-Network
    Menu, you have to change Interface(left/right on your remote)
    to wlan (eth0 is default still) and set "Setup network on startup" as ON
    * Fix some problems with OSD in 720P mode
    * Change some Settings for video driver
    DOWNLOAD IMAGE
    Code:
    http://hotfile.com/dl/111107774/db208c0/cs200.img.html

  7. #7
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Coolstream HD-1 Original Firmware

    Software Update Wizard - Agreement

    Do not perform updates using any data other than the official update data from our website.
    Using Software Updates You expressly acknowledge and agree that use of this Software is at
    your own risk.
    In no event shall Coolstream LTD be liable for any damages whatsever.
    Contact info@coolstreamtech.com for any questions about our Software.
    ----------------------------------------------------------------------------------

    Warning:
    Addon File will renew just Software parts needed and will not
    touch your Settings, if you like process Full Update please use
    the baseimage from coolstream.txt Section.
    Please dont power off your receiver bevore Upgrade is done!
    -----------------------------------------------------------------------------------
    26.03.2011

    Partial Update for Firmware Version 2.00
    DONT USE FOR OLDER FIRMWARE !!

    - Update frontpanel and kernel to actual versions.
    To fix USB and frontpanel kernel shutdown hook.
    Attached Files Attached Files

  8. #8
    Banned
    Join Date
    30-06-2005
    Location
    Kukes,Albania
    Posts
    4,252
    Uploads
    3,558

    Re: Coolstream HD-1 Original Firmware

    New original Coolstream Image 2.02
    Code:
    02.05.2011
    
    Software Update Wizard - Agreement
    
    Do not perform updates using any data other than the official update data from our website.
    Using Software Updates You expressly acknowledge and agree that use of this Software is at
    your own risk.
    In no event shall Coolstream LTD be liable for any damages whatsever.
    ----------------------------------------------------------------------------------
    
    Warning:
    This File will renew the Software and you will lose the old Settings,
    to keep old Setting please use Partial Updates in the Software List
    if available(simple_update.txt Section).You must have version 1.90 or
    higher already installed.
    This release will upgrade your Kernel on first boot if not already done!!!
    Please dont power off your receiver bevore Upgrade is done!
    -----------------------------------------------------------------------------------
    01.05.2011
    
    * Fix major crash using Videotext feature
    
    * Fix "bad" display of dvb subtitle

  9. #9
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Coolstream HD-1 Original Firmware

    02.06.2011 neues original Coolstream Image online 2.03

    Software Update Wizard - Agreement

    Do not perform updates using any data other than the official update data from our website.
    Using Software Updates You expressly acknowledge and agree that use of this Software is at
    your own risk.
    In no event shall Coolstream LTD be liable for any damages whatsever.
    Contact info@coolstreamtech.com for any questions about our Software.
    Become a Fan on http://www.facebook.com/CoolstreamHD
    ----------------------------------------------------------------------------------

    Warning:
    This File will renew the Software and you will lose the old Settings,
    to keep old Setting please use Partial Updates in the Software List
    if available(simple_update.txt Section).You must have version 1.90 or
    higher already installed.
    This release will upgrade your Kernel on first boot if not already done!!!
    Please dont power off your receiver bevore Upgrade is done!
    -----------------------------------------------------------------------------------
    02.06.2011

    * Update Neutrino to svn 1499
    Attached Images Attached Images
    Attached Files Attached Files

  10. #10
    Administrator opentel25's Avatar
    Join Date
    19-02-2006
    Location
    Constantine
    Posts
    7,636
    Uploads
    808

    Re: Coolstream HD-1 Original Firmware

    Code:
    Neues Original Coolstream Image V2.04 (17.11.2011) HD1, NEO1, ZEE, NEO2 
    
     
         
    17.11.2011 neues original Coolstream Image online 2.04 Software Update Wizard - Agreement ----------------------------------  Do not perform updates using any data other than the official update data from our website. Using software updates you expressly acknowledge and agree that use of this Software is at your own risk. In no event Coolstream LTD shall be liable for any damages whatever.   -------------------------------------------------------------------------  Warning: This release will upgrade your Kernel on first boot if not already done!!! Please dont power off your receiver bevore upgrade is done!    - Enable multirecording capability on same transpoder You can record up to 8 channels - add support for 24bit PNGs - show counter of stopped recordings in messagebox - add new icons And many bugfixes
    Download

Page 1 of 2 12 LastLast

Similar Threads

  1. Original Firmware
    By chouchou in forum Kaon Software and Tools
    Replies: 6
    Last Post: 06-07-2014, 09:09:59
  2. Question va-fox firmware original
    By henriIV in forum Humax Firmware
    Replies: 2
    Last Post: 29-07-2009, 15:17:36
  3. Re: Original Firmware
    By angevin in forum French / Français
    Replies: 0
    Last Post: 21-08-2007, 00:14:56
  4. Firmware original???
    By bru77o in forum Plusat
    Replies: 1
    Last Post: 02-06-2006, 04:56:50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •