Page 1 of 41 12361126 ... LastLast
Results 1 to 10 of 408

Thread: Μoίρασμα κάρτας[cs] - Guides for PC and dreambox

  1. #1
    Junior Member colossus_r's Avatar
    Join Date
    01-03-2006
    Posts
    23
    Uploads
    0

    Μoίρασμα κάρτας[cs] - Guides for PC and dreambox

    Guide for newbies for
    How to setup a windows based pc as a cardServer with NewCS

    Hi all
    This is a small HowTo
    Aftre of a lot of search on the net for cs(cardsharing) i found a lot of info about this but only for linux based pc.

    Nothing about cs and cardserver with a windows based pc.
    this is a newbie guide to CARDSHARING with pc as a server
    So here is how to setup a win based pc as a Cardserver

    What You need:

    Hardware
    a) A pc capable of running Windows XP or Windows 2000 with
    1 network card
    1 serial port
    (memory and disk its not importand????...for cardsharing)

    a) A serial card reader
    c) a dsl connection (if you want to share your cards with others)

    Software

    a) Newcs 1.13 (in the atached file)
    b) NewcsGui (a gui interface for the NewCS server)
    (a and b files are incuded in the atach. zip file)
    c) An clean text editor (like ultraedit)

    Unzip the files in a directory
    Edit the configuration file newcs.xml
    1. find the line <node>COM2</node>
    and put your com port where the cardreader its connected to yout pc
    2. in the line <udp_host>192.168.0.101</udp_host> put your pc ip address
    3. in the <newcamdserver> section find the line <name>yourservername</name>
    and put you cardserver name.
    4. in user section put user name and pass
    save the file

    Now you are ready to run your server

    Run the program newcsgui.exe and your server its ready
    You can see any server activity in the file logfile.txt

    Now your client can connect to the server using newcamd or mgcamd emu in port 10001 (default)

    Just edit the configuration file newcamd.conf with server ip port username
    password DES key and servername with the same values as the ones in newcs.xml


    For wan connection you have to setup your router to forward all traffic in port 10001 to the pc's ip

    Thats all you are UP and Running

    Colossus

    Sharer the NowHow

  2. #2
    Junior Member colossus_r's Avatar
    Join Date
    01-03-2006
    Posts
    23
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    SECOND GUIDE
    This guide its to help newbies to:
    Setup 2 boxes for Card Sharing in Lan or Wan.

    You need :

    2 dreamboxes (???? of course)network conected
    1 Network cable

    a) If you connect the 2 boxes direct you need a cross network cable
    b) if you connect the to boxes in a hub with other network devices then you need straigth network cable
    (both of them easy to find in computer stores)
    ************************************************** **************
    Network setup:
    Go in dreambox setup-expert setup-network settings and put ip address (something like this)
    dreambox1 : ip 192.168.0.1
    subnet 255.255.255.0
    gateway (ip address of the router)
    DNS (ip address of the router)
    If you dont have Internet connection leave Gateway and DNS blanc

    dreambox2 : ip 192.168.0.2
    subnet 255.255.255.0
    gateway (ip address of the router)
    DNS (ip address of the router)
    If you dont have Internet connection leave Gateway and DNS blanc

    Check the enable Networking chekbox

    If you have a PC thats connect to internet (dialup or adsl) then you can put the pc's ip
    as Gateway and DNS server in both boxes to give them internet access

    IMPORTAND????
    If you have a router for the internet the ip of the 2 boxes MUST be in same
    network as your router.
    Examples:
    If the router's Ip address is 10.0.0.1 then your boxes ips MUST be 10.0.0.2 and 10.0.0.3
    If your router's IP address is 192.168.1.1 then your boxes MUST be 192.168.1.2 and 192.168.1.3

    Now your boxes are connected... and with internet access (if its present)
    ************************************************** **************
    EMU and CardSharing How to:

    Install in your boxes one of new images.
    I prefer PLi Diamod as gives you the choise to have separate server and client EMU.
    In this example we will use as cardserver EMU the NewCS and as client EMU Newcamd
    So download and install in the boxes the 2 EMUS (NewCS and Newcamd). If only 1 dreambox
    it will act as a server then in the second one you dont need to install NewCS, only NEwcamd

    Now we have to to configure the files for the sharing
    ************************************************** ***************
    Server configuration of the file Newcs.xml (/var/tuxbox/config)
    (in the supplied zip there is a Newcs.xml file for this example)

    Open the file with a plain text editor (i use UltraEdit)

    Find the section <debug>
    and then <udp_host>192.168.0.1</udp_host>
    Here you put your server box ip

    Then find <udp_port>10000</udp_port>
    Here you put servers port

    Find the section <newcamdserver>
    and then the <name>testserver</name>
    Here you put the name of your server (testserver)
    Then find <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
    Here you put a login key for your users in this format
    Then find
    <user>
    <name>username1</name>
    <password>userpas1</password>
    <au>on</au>
    <spider>No</spider>
    </user>
    and put user name and password for your users
    ************************************************** ******************************
    ********

    Server and client configuration of file Newcamd.conf (/var/tuxbox/config/newcamd)

    (in the supplied zip there is a Newcamd.conf file for this example)
    Open the file with a plain text editor

    Find the line:

    CWS = 192.168.0.1 10000 username1 userpas1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan testserver

    Line parts in plain English
    1)192.168.0.1 --- ip address of the server (dreambox acting as server)
    (the same as the one defined on newcs.xlm)
    2)10000 --- port of the server (the same as the one defined on newcs.xlm)
    3)username1 userpas1 --- username and pass of the client (the same as the one defined on newcs.xlm)
    4)01 02 03 04 05 06 07 08 09 10 11 12 13 14 --- access code (the same as the one defined on newcs.xlm)
    5)lan -- leave this as lan
    6)cardserv - name of the cardsharing server (the same as the one defined on newcs.xlm)
    ************************************************** ******************************
    ******************

    IMPORTAND!!!!!!!!!!!!!!!!!!!!!!!!
    Entrys in newcs.xml must be the same in the newcamd.conf
    (ip addresses-servername-username-password-deskey)
    All this is case sensitive (username it is not the same with UserName)

    After saving transer the 2 files in your Dreambox and restart your boxes...
    In lan setups this is ready to work
    In wan setups you need a router or a dreambox plugin with DynamicDNS capabilities

    Thats all guys
    You are ready to CARDSHARE


    colossus
    Share the NowHow

  3. #3
    Junior Member
    Join Date
    06-03-2006
    Posts
    14
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    με εκανες και εκανα εγγραφη...

    ευχαριστουμε...

    εγω που εχω gemini image τι πρεπει να "κατεβασω" και που πρεεπι να βαλω τα αρχεια???

    μια βδομαδα εχω τον 500 και ακομα ψαχνομαι....

  4. #4
    Junior Member colossus_r's Avatar
    Join Date
    01-03-2006
    Posts
    23
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    Quote Originally Posted by fuzz
    με εκανες και εκανα εγγραφη...

    ευχαριστουμε...

    εγω που εχω gemini image τι πρεπει να "κατεβασω" και που πρεεπι να βαλω τα αρχεια???

    μια βδομαδα εχω τον 500 και ακομα ψαχνομαι....
    Gia
    Yphrxan polla...para pola pm kai etsi ta ebala kai edo. anyway

    An milame gia mirasma me metaxy dreambox tote se endiaferei to 2o guide.

    Doyleyei poly kala se ola ta nea images (PLI-Davinci-Gemini)

    Afoy katebaseis kai egkatastiseis newcs kai newcamd h mgcamd tote diortose me ta stoixeia soy ta arxeia newcs.xml kai newcamd.conf.

    To arxeio newcs.xml paei ston katalogo /var/tuxbox/config
    To arxeio newcamd.conf paei ston katalogo /var/tuxbox/config/newcamd
    An akoloythiseis akribos tis odigies den tha exeis kanena problima.

    Apantise moy an eisai ok.

    colossus
    Share the NowHow

  5. #5
    Junior Member
    Join Date
    06-03-2006
    Posts
    14
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    οταν εχεις καλο δασκαλο...ευχαριστω για τη βοηθεια

    κατι καταφερα αφου εβαλα το PLi
    τωρα,θελω να "μοιρασω" τα τσοντοκαναλα που δινει ο 500
    εχω ηχο -με τον τροπο που μας ειπες- αλλα δεν εχω εικονα...
    κανω κατι λαθος?
    α!ο server ειναι ο 500 και απο το LNB OUT δινω στο PC που "τρεχει" ALTdvb με το WINCSC κ CSC

  6. #6
    Junior Member colossus_r's Avatar
    Join Date
    01-03-2006
    Posts
    23
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    hi m8

    Xerome poy to eftiaxes amesos???? Kairo tora prospatho na po ston kosmo oti to cardsharing den einai piriniki fisiki ... ta pragmata einai poly apla. Kai as theloyn oi diaforoi gouroy ton forum na lene oti theloyn. Mia den apantoyn katholoy kai otan apantoyn einai xeiroteroi apo thn Pithia..????

    Any way..Share the NowHow opos leo kai ego.


    Tora gia to erotima soy. An h keraia poy exeis exei 1 lbn tote den einai kai to eykolo. Tha mporeis mono na blepeis otan kai ta dyo einai sto idio kanali.

    Ta kanalia tis kartas toy 500 Inxtv kai xplustv anoigoyn opos ola ta alla.
    Tin proti fora gia tin energopoiisi tha perimeneis ligo mexri na erthei to sima.
    Gia cardsharing perimeneis na anoixei ligo pio poly apo ta ipoloipa ta ellinika.
    Kai bebaia anoigoyn mono me tin mgcamd.

    colossus
    Share the NowHow

  7. #7
    Junior Member
    Join Date
    06-03-2006
    Posts
    14
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    αν και στην αρχη νομισα οτι κατι εφτιαξα τελικα δεν δουλεψε

    ας τα δουμε απ την αρχη κι αν μπορεις βοηθας

    εχω βαλει τo PLi και θελω να μοιρασω την καρτα του INXTV -για παραδειγμα -που ειναι στον 500 να βλεπω και στο pc που τρεχει ALTdvb με WINCSC και CSC

    εχω φτιαξει τα αρχεια που μας ειπες και τα εχω βαλει στον 500 στους καταλογους που αναφερεις
    (το πισι εχει 192,168,0,32 κ ο 500 192,168,0,35)

    στον 500 εχω βαλει default softcam to camd3 (βλεπω ΙΝΧΤV)και
    cardserver το newcs

    οταν ανοιγω το ALTDVB me WINCSC μου βγαζει μυνημα wrong deskey or protocol (του εχω βαλει newcamd και τις ρυθμισεις 192,168,0,35 Poy einai o server και το deskey user1 k user1 Που εχω σαν username k pass port 10000)

    στο CSC μου λεει αυτο

    21:19:11.218 - servers[0] started: newcamd525:cardserv:10000
    21:19:39.937 - CAT received:
    21:19:39.937 - 0000: 01 B0 4C FF FF CB 00 00 09 07 05 00 E6 A7 13 01 ..L.............
    21:19:39.937 - 0010: 20 09 04 06 04 E6 A5 09 04 06 18 F0 01 09 04 4A ..............J
    21:19:39.937 - 0020: 70 F0 00 09 12 4A D0 F0 02 08 12 AC 02 00 0C 00 p....J..........
    21:19:39.937 - 0030: 32 39 39 35 34 00 00 09 12 4A D1 F0 03 08 12 AC 29954....J......
    21:19:39.937 - 0040: 02 00 0C 00 32 39 39 35 34 00 00 01 2B 95 ....29954...+.
    21:19:39.937 - Can't find: CAID 0618, IDENT 000000


    τι δεν κανω σωστα???κολησα!!!!

  8. #8
    Junior Member colossus_r's Avatar
    Join Date
    01-03-2006
    Posts
    23
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    Gia

    Ta arxeia poy anebases exoyn ta pio kato lathi:

    Ypotheto oti to newcs.xml einai ston 500.
    Kai to newcamd.conf paei sto pc:

    a) Lathos onoma server.Sto newcs.xml to onoma toy server einai:
    <newcamdserver>
    <enabled>Yes</enabled>
    <name>testserver</name>

    testserver. Sto newcamd.conf stin grammi:
    CWS = 192.168.0.35 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

    to onoma toy server einai cardserv. Dialexe ena apo ta 2. Prepei na einai idia

    b) sto newcamd.conf oi grammes:
    CWS = 192.168.0.35 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 192.168.0.35 10000 user2 user2 01 02 03 04 05 06 07 08 09 10 12 13 14 lan cardserv

    exoyn tin idia porta 10000. H mia einai 10000 kai i alli 10001 giati etsi anaferonte sto newcs.xml

    Diortose ta kai apantise moy tora


    colossus

  9. #9
    Junior Member
    Join Date
    06-03-2006
    Posts
    14
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    νομιζω τωρα τα αρχεια ειναι οκ
    για ριξε μια ματια και να δεις λαθη κανε τις απαραιτητεσ διορθωσεις

    τα δυο αρχεια ειναι στον 500

    στο πι σι (δεν ξερω αν εχεις υποψιν πως δουλεευι το ALTdvb)δεν βαζω καποιο αρχειο απο αυτα...σωστα???

  10. #10
    Junior Member colossus_r's Avatar
    Join Date
    01-03-2006
    Posts
    23
    Uploads
    0

    Re: Cardsharing - Guides for PC and dreambox

    Quote Originally Posted by fuzz
    νομιζω τωρα τα αρχεια ειναι οκ
    για ριξε μια ματια και να δεις λαθη κανε τις απαραιτητεσ διορθωσεις

    τα δυο αρχεια ειναι στον 500

    στο πι σι (δεν ξερω αν εχεις υποψιν πως δουλεευι το ALTdvb)δεν βαζω καποιο αρχειο απο αυτα...σωστα???
    Den gnorizo katholoy to altdvd ala an doyleyei me newcamd prepei na exei kapoy ena arxeio newcamd.conf
    Se ayto to arxeio prepei na baleis tis 2 grammes
    CWS = 192.168.0.35 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
    CWS = 192.168.0.35 10001 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

    alios h newcamd den tha xerei poy einai o server kai alla stoixeia.

    Pare diortomena ta arxeia kai pes moy ti egine


    colossus

Page 1 of 41 12361126 ... LastLast

Similar Threads

  1. Tutorial generale Dreambox Tutorials and Dreambox Guides
    By Tunimax in forum Dreambox Information and Tutorials
    Replies: 10
    Last Post: 01-08-2010, 03:24:17
  2. Guides HowTo make some tip and tricks on your Dreambox
    By lolazoca in forum Dreambox Information and Tutorials
    Replies: 0
    Last Post: 22-04-2009, 23:20:31
  3. Guides for PROGDVB
    By nmaverick in forum Satellite Equipment
    Replies: 7
    Last Post: 15-05-2008, 12:31:47
  4. ok ive read all the guides and so on
    By tornado2003 in forum Satellite Equipment
    Replies: 1
    Last Post: 08-11-2005, 11:01:52
  5. newbie Guides
    By NewKid in forum English (UK)
    Replies: 3
    Last Post: 22-04-2005, 01:55:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •