Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: HELP: convert Microbox I to Microbox II damage and block device

  1. #1
    New Member
    Join Date
    07-05-2006
    Posts
    6
    Uploads
    0

    Unhappy HELP: convert Microbox I to Microbox II damage and block device

    Please Helppppppppppppppppppppppp
    i tried to upgrade my Microbox I to II as described in many threads and forums but i ended up with the following problem
    1- The device won't start anymore
    2- Only red LED is on, no more flashing Greed LED
    3- I connected the device directly to the screen but i only get black screen, it won't turn on,the remote won't work
    4- Tried converting back to Microbox I, the loader always work and does flash the software when i unplug/plug the power on the device
    5- The problem still there, points 1, 2, 3 are still there
    6- I try to use Microbox I loader, do-up, but it won't flash the device, the loader is not working

    what's wrong? is mu device half damaged? can it be repaired by software?

  2. #2
    New Member
    Join Date
    09-06-2007
    Posts
    7
    Uploads
    0

    Re: HELP: convert Microbox I to Microbox II damage and block device

    hi have u solve the probleme ? i have the same probleme when i passed the dump then the clean firm the receiver will be ok but when i convert it to dongle the probleme will reappears

  3. #3
    Junior Member
    Join Date
    23-01-2010
    Posts
    14
    Uploads
    0

    Re: HELP: convert Microbox I to Microbox II damage and block device

    use dump file your microbox is ok

  4. #4
    New Member
    Join Date
    09-06-2007
    Posts
    7
    Uploads
    0

    Re: HELP: convert Microbox I to Microbox II damage and block device

    i used the dump file then the clean file but the dongle file blocked device what can i do please

  5. #5

    Re: HELP: convert Microbox I to Microbox II damage and block device

    I am facing the same problem after converting my micrbox 1 to microbox 2. Let me know the if the issue has been resolved.

    Thanks

    Farooq

  6. #6

    Re: HELP: convert Microbox I to Microbox II damage and block device

    The problem is that the conversion from Microbox 1 to microbox 2 have blocked the booting of your microbox ..It's why it does not work , and the software loader "DoUp" cannot boot after "waiting for boot " to upload the soft without result So you have to ask if someone can provide a soft to UNBLOCK , OR DEBLOCK OR REPAIR OR FIX the boot .. When the green light blinks in your Microbox when you turn it on , that means that it has booted and be sure IT WILL WORK . Good luck

  7. #7
    VIP Member scrombi's Avatar
    Join Date
    18-01-2007
    Posts
    3,030
    Uploads
    10

    Re: HELP: convert Microbox I to Microbox II damage and block device

    dear , i am not sure it will help u , bcoz
    I have not tried it my self, so I can't take any damage responsibilty. try following softwares.
    Attached Files Attached Files

  8. #8

    Re: HELP: convert Microbox I to Microbox II damage and block device

    I suffered form the same problem, however , I found the solution in some forums. Here it is :1- decompress the file 2- use the loader included to load the files ج ب أ in the order mentioned( first أ then ب last ج ) then the last step use the cleaner included to restore the dongle to factury settings.
    Hope this will work
    Attached Files Attached Files

  9. #9
    VIP Member Cyb3rc0m's Avatar
    Join Date
    06-04-2005
    Location
    город
    Posts
    644
    Uploads
    0

    Re: HELP: convert Microbox I to Microbox II damage and block device

    from few time the chinese constructor have blocked he issue for conversion and thet are bad check sum when u try to update it ...wait the fuur realase maybe thy are some fix soon ...
    Best regards

  10. #10

    Re: HELP: convert Microbox I to Microbox II damage and block device

    Kaed ... Your problem is RESOLVED ... good news .. I send to you the links to get rid of your problem ..
    Link 1....http://www.sendspace.com/file/l5edry

    Link 2... http://www.sendspace.com/file/h33jly

    Link 3... http://www.sendspace.com/file/tvgxdr

    A...Download these links from Sendspace by copy and paste to the address bar

    B... Extract them with winzip or winrar and download them in order 1...2...and 3 .. to your microbox 1... The first link will make the green light blink .. { good sign } .. after that your microbox is able to receive the DoUp file and it WILL WORK FOR SURE ... If you have any problem with that please Reply here ... Good luck

Page 1 of 2 12 LastLast

Similar Threads

  1. New Microbox II to Microbox I Converter
    By OnePiece in forum Microbox
    Replies: 8
    Last Post: 24-08-2011, 21:23:38
  2. New MicroBox II W3 Software + MicroBox II W6 Software + MicroBox II NSS6 Software
    By messaid saadane in forum Microbox Firmware
    Replies: 2
    Last Post: 30-07-2011, 22:30:24
  3. Question about microbox
    By jkobti in forum English (UK)
    Replies: 1
    Last Post: 28-10-2010, 21:22:17
  4. New MicroBox II to MicroBox I convertor
    By messaid saadane in forum Microbox Firmware
    Replies: 2
    Last Post: 24-08-2010, 15:51:15
  5. MIcrobox sur W3 14/09/09
    By Yasin T in forum Satellite Receivers A to Z
    Replies: 0
    Last Post: 14-09-2009, 18:37:50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •