Results 1 to 5 of 5

Thread: release-dm800se

  1. #1
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    release-dm800se

    11/11/2010

    HERE IS THE FIRST OFICIAL IMAGE FOR DM 800 SE

    Code:
    Enigma2: Release 3.0
    Machine: Dreambox dm800se
    Date: 20101111
    Issuer: Dream Multimedia
    MD5: 15f3a21351878b1adc3ae9732bd1c240
    Description:
    Initial Release

  2. #2
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: release-dm800se

    Code:
    Enigma2: Release 3.0.1
    Machine: Dreambox dm8000
    Date: 20101115
    Issuer: Dream Multimedia
    Link: http://sources.dreamboxupdate.com/opendreambox/1.6/dm8000/images
    MD5: 5994efcc0baf3ca2a5b60fe2e3eac30f
    Description:
    -------------------------------
    CHANGELOG DM8000 RELEASE 3.0.1
    -------------------------------
    ------------------------------------------
    enigma2 (20101111 rel30 -> 20101115 rel30)
    ------------------------------------------
    [Softwaremanager]
    	don't display upgradable packages additionally as installed packages	
    
    [Core]
    	fixed a resource leak when thumbnail pictures are viewed
    
    [Startwizard]
    	don't install satellite favourites for cable and terrestrial tuners
    	in case no default service list is present, prompt a service scan during setup wizard
    
    [Skins]
    	inhibit unexpected blinking of parts of the OLED display while recording
    
    [Translations]
    	update et,fi,lt,sk translations
    
    ------------
    misc changes
    ------------
    	fixed inoperative automatic cable transponder searching
    release-dm8000-3.0.1.nfi

  3. #3
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: release-dm800se

    DMM release-dm800se-3.0.3

    Code:
    -------------------------------
    CHANGELOG DM800SE RELEASE 3.0.3
    -------------------------------
    ------------------------------------------
    enigma2 (20101116 rel30 -> 20101216 rel30)
    ------------------------------------------
    [Media-/Movieplayer]
    	improved mkv file compatibility
    	subtitle sync improvements
    
    [Core]
    	fixed turning motorized dish with disabled input power measurement
    	don't send DiSEqC repeats in advanced tuner configuration when DiSEqC 1.0 is configured
    	(this can fix some tune failed problems when advanced tuner config is used)
    
    [Misc]
    	fixed broken screenshots
    	enabled support for wifi usb sticks
    	improved mobile phone like character input
    	improved color oled skin compatibility
    	fixed bug in enigma2 main config class (this fixes some broken plugins)
    
    [Software Manager]
    	allow hotplug devices as backup locations
    	don't wait forever when network is not reachable on update
    
    [Translations]
    	updated some translations
    
    -----
    other
    -----
    	updated enigma2-plugins to more current checkout version (20101213 rel30)
    	for example this fixes not working MyTube plug-in
    
    	updated enigma2-skins to more current checkout version (20101211 rel30)
    	for example this improves the compatibility to the color oled display
    
    ------------
    linux kernel
    ------------
    	fixed wrong order of sata and e-sata port (when both are used)
    	increased size of userspace stack to improve application compatibility
    
    ------------------------------------------
    hardware drivers (20101111 -> 20101215)
    ------------------------------------------
    	allow tuning to lower than 1000ksyms with DVB-S(2) tuners again
    	fixed inaccurate clock
    	vtuner interface fixes/speedups, add vtuner acceleration support
    	fixed picture dropouts seen on some h264/mpeg services (buffer underruns)
    	fixed rare PAT timeout problems after deep standby wakeup
    	fixed deepstandby wakeup with the (additionally purchasable) omikron plus remote control
    	fixed bcm4505/06 signal problems after few seconds on Astra 19.2 tp 11914H 27500 9/10
    	fixed pcr problems (fixes frequently distorted live audio output)
    	fixed small demux problem
    DOWNLOAD

  4. #4
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: release-dm800se


    22.03.2011
    Code:
    Enigma2: Release 3.1
    Machine: Dreambox dm800se
    Date: 20110323
    Issuer: Dream Multimedia
    Link: http://sources.dreamboxupdate.com/opendreambox/1.6/dm800se/images
    MD5: 716e7110e4403cec0bc237ff0b9802b4
    Description:
    -------------------------------
    CHANGELOG DM800SE RELEASE 3.1.0
    -------------------------------
    ------------------------------------------
    enigma2 (20101216 rel30 -> 20110321 rel31)
    ------------------------------------------
    [Media-/Movieplayer]
    	Added support for m2ts files
    	Fixed restart of files after end of file
    	Improved seek forward/backward in TS recordings
    
    [Misc]
    	Fixed crash when calling plug-ins requiring a service list (e.g. (Graph-)MultiEPG) from PVR playback mode
    	Fixed crash on startup with unfeasible timers (i.e. timers of removed or disabled tuners)
    	Fixed sorting of timer list (don't move disabled timers to end of list)
    	Timer sanity check fixes
    	Fixed invisible bouquet/provider names on LCD/OLED in service list
    	Changed partition layout to improve performance of hard disks with large sectors (4K)
    	Clear LCD/OLED on shutdown
    
    [Translations]
    	Fixed some incorrectly displayed texts on Polish channels
    
    [Plug-ins]
    	Implemented new PluginDescriptor option "needsRestart" to define whether a plug-in needs a restart of enigma2 after installation
    	Added DMM award winner plugin to image (bouquet/parental editor in web interface)
    
    [core]
    	Added /proc/bus/nim_sockets to crashlogs
    
    -----
    other
    -----
    	Added DTS-HD -> DTS conversion (for pass-through)
    	Increased automount timeout
    	Fixed inversed logic for WPA2 vs. WPA/WPA2
    	Use zeroconf only as fallback when no DHCP server or static IP address is available
    	Updated enigma2-plugins to 2011-03-18 (rel31)
    	Updated enigma2-skins to 2011-02-27 (rel31)
    	Fixed installation of downloadable kernel modules
    	Use local time zone for FTP server
    
    ------------
    Linux kernel
    ------------
    	Added support for Realtek 8712U-based wireless LAN USB sticks (802.11n)
    	Fixed booting from FAT filesystems
    
    ------------------
    secondstage loader
    ------------------
    	Improved USB support
    	Improved compatibility with strict web browsers
    
    ------------------------------------------
    hardware drivers (20101215 -> 20110309)
    ------------------------------------------
    	Added support for two vtuners
    	Use LinuxTV API dvr devices instead of proprietary pvr device(s)
    	Fixed a small PCR problem
    	Fixed small demux bug to prevent packets from previous running service in recorded TS stream
    	Reentrancy fixes in demux and video/audio clip mode (fixed sporadic kernel oops)

    release-dm800se-3.1.0

  5. #5
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: release-dm800se

    release-dm800se-3.2.0

    Code:
    Enigma2: Release 3.2
    Machine: Dreambox dm800se
    Date: 20110929
    Issuer: Dream Multimedia
    MD5: b050c34c25945b684cf5c539e7a42a8b
    Description:
    -------------------------------
    CHANGELOG DM800SE RELEASE 3.2.0
    -------------------------------
    ------------------------------------------
    enigma2 (20101216 rel31 -> 20110929 rel32)
    ------------------------------------------
    added basic support for remote TS services in bouquets (rdp, udp, http, iptv)
    added blindscan support for BCM4505, BCM4506 and ALPS BSBE1 C-/D01A DVB-S(2) Tuners
    extended EPG cache from 14 to 28 days
    display unscrambled services in a new FTA service group
    added persian translation
    put USB harddisks into stand-by
    record timers may now be stopped using the record button
    virtual keyboard: support Czech and Slovak layout. layouts can be switched using the yellow button
    deletion of files could cause corrupted recordings
    SoftwareManager: support installation of Wireless LAN drivers
    audio selection dialogue: number buttons may now be used to switch audio tracks
    NetworkSetup: more consistent configuration of hidden wireless networks
    improved handling of standby, shutdown and DiSEqC input selection when using a rotor
    added possibility to use hidden bouquet selection in multi epg(s)
    switched "subtitles" and "audio tracks" button description in AudioSelection dialog
    record timers: fixed invalid conflicts on creation of new timers, when using the DVB-C/T tuner module
    some EPG characters were displayed incorrectly
    fixed rotor problems with unicable LNB
    fixed broken spinners on e2 startup with HD skin
    fixed detection of incorrectly marked AC3 audio tracks (ATSC)
    fixed rare crash at event info dialogue
    
    -----
    other
    -----
    improved harddisk performance under high load
    
    ------------
    Linux kernel
    ------------
    fixed crash when transfering files via network
    better hdd detection
    small usb fix
    improved stability
    
    ---------------------------
    secondstage loader 83 -> 84
    ---------------------------
    improved flash error correction
    
    ------------------------------------------
    hardware drivers (20110309 -> 20110902)
    ------------------------------------------
    added 3D framebuffer support (for side by side and top and bottom 3D services)
      (no auto detection yet)
    fixed audio sync problems on playback to live transition
    fixed async audio on playback to live transition and on bootup on H264 services
    fixed freeze after some channel changes
    fixed possible locking problems (deadlock)
    dvi audio didn't work reliably after cold boot
    throttled mpeg decoder debug output a bit
    better /proc/stb(vmpeg/X/dst_* handling via dst_apply
    small alsa signed / unsigned fix
    
    bcm4505/06:
      added blindscan support
      readback corrected symbolrate and frequency
      added constellation buffer read support
      fixed tuner crash (no hab ack messages in kernel debug)
      fixed standby problems
      added possibility to use SCPC optimized search ranges
      fixed manual LDPC FEC modes
      small typo fixed
    
    alps-bsbe1-c01a
      added blindscan support
      added constellation buffer read support
      fixed locking problems (better performance)
    
    cxd1981:
      fixed tuner problems after bootup from deepstandby in DVB-C mode
      optimized DVB-C a bit
      add possibilty for faster mode change via FE_SET_PROPERTY DTV_DELIVERY_SYSTEM ioctl
    
    dvb-s2 tuners:
      fixed readback of current pilot state
    release-dm800se-3.2.0.nfi

Similar Threads

  1. Experimental Image for DM800se
    By aguda in forum Dreambox DM 800 HD SE Images
    Replies: 276
    Last Post: 27-07-2012, 23:36:18
  2. EDG-NEMESIS Images DM800se
    By aguda in forum Dreambox DM 800 HD SE Images
    Replies: 23
    Last Post: 14-02-2012, 23:50:51
  3. Video presentation of the new DM800se
    By aguda in forum Dreambox Information and Tutorials
    Replies: 0
    Last Post: 31-10-2010, 16:15:45
  4. DM800se HD Bootlogo
    By wahid in forum Dreambox Software and Tools
    Replies: 1
    Last Post: 11-10-2010, 18:39:12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •