Results 1 to 8 of 8

Thread: Config oscam pour TNTsat sur DM7025

  1. #1
    Junior Member
    Join Date
    20-11-2010
    Posts
    12
    Uploads
    0

    Config oscam pour TNTsat sur DM7025

    Bonjour,
    J'ai regardé pas mal de posts, plutot interessant sur ce sujet.
    Malgré tout, j'ai un peu de mal ...
    Je comprends que OScam 1.0 plus stable que CCam 2.2 avec une carte officielle Orang TNTSAT.
    Par contre je galere pour la conf.
    Les dernieres que j'ai trouvé sont d'Aout et je comprends que cela ne le fait plus :)
    Pas de sharing, uniquement TNTSAT Orange.
    J'ai un dream 7025 avec Gemini 4.7.
    Merci d'avance pour votre aide.

    Merci de faire attention à ton titre car il veut rien dire...Je change

  2. #2
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Config oscam pour TNTsat sur DM7025

    salut,

    test ceci:
    oscam.conf
    Code:
    [global]
    nice = -1
    WaitForCards = 1
    ClientTimeout = 5
    CacheDelay = 120
       
    
    [webif]
    httpport = 16002
    httpuser = user
    httppwd = password
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    oscam.server
    Code:
    [reader]
    label = orange
    Protocol = internal
    detect = CD
    device = /dev/sci0
    group = 1
    emmcache = 1,3,2
    ident = 0500:FFF400,032900,032910,032920,032930,032940,032950
    caid = 0500
    oscam.user
    Code:
    [account]
    user = user
    pwd = pass
    group = 1
    au = orange

  3. #3
    Junior Member
    Join Date
    20-11-2010
    Posts
    12
    Uploads
    0

    Re: Config oscam pour TNTsat sur DM7025

    Bonsoir,
    Merci pour la reponse.
    Cela fonctionne parfaitement. Merci.
    Pour info, a quoi correspond user/pwd ds le fichier oscam.user ?
    Est ce que les droits de ma carte vont se mettre a jour automatiquement ?
    Merci d'avance.

  4. #4
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Config oscam pour TNTsat sur DM7025

    salut,

    voila :
    oscam.user(5) oscam.user(5)



    NAME
    oscam.user - user configuration file for OSCam

    SYNOPSIS
    The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recurring
    (more than one account).

    DESCRIPTIONS
    The [account] section
    user = name
    account name, required

    pwd = password
    password for account, required

    hostname = hostname
    host from which user connection is allowed

    betatunnel = <CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]...
    define Betacrypt tunneling (max. see CS_MAXTUNTAB in globals.h). The ServiceID can also be used for wild‐
    carded CAIDs.

    example: betatunnel = 0100.0001:0200,0300.0004:0500
    betatunnel = 0600.FFFF:0700

    uniq = 0|1|2|4
    unique level:
    0 = disabled, default
    1 = only one connection per user is allowed
    2 = set user to fake if source ip is different
    (e.g. for newcamd clients with different CAIDs and ports)
    3 = only one connection per user, but only the last login
    will survive (old mpcs behavior)
    4 = set user only to fake if source ip is different,
    but only the last login will survive

    sleep = minutes
    time waiting for inactive user, default:none

    sleepsend = 0|255
    255 = OSCam client only: stopping requests until next zap, 255 = camd3 only: stopping requests until restart
    of camd3 client, default:0

    caid = <CAID>[&<mask>][:<CAID>[&<mask>]...
    limit CAIDs, default:all CAIDs, required

    example: caid = 0100&ffff:0200:0300&ff00

    au = label of reader|1
    AU setting:
    label of reader = sending EMMs to specified reader
    (security issue: client can see SC data!)
    1 = auto AU is sending EMMs to all readers
    (security issue: client can see SC data!)
    default:none

    group = group[,<group>]...
    user assingment to reader group, default=none, required

    services = [!]services[,[!]<services>]...
    user [de]assingment to service group, default:none

    ident = <CAID>:<ident>[,<ident>,...][;<CAID>:<ident>[,<ident>,...]]...
    user assingment to idents, default:none

    class = [!]class[,[!]class]...
    user [de]assingment to classes, default=none

    example: class = 01,02,!03,!04

    chid = <CAID>:<ChID>[,<CAID>:<ChID>]...
    user assingment to Irdeto ChID, default:none

    monlevel = 0|1|2|3|4
    monitor level:

    0 = no access to monitor
    1 = only server and own procs
    2 = all procs, but viewing only, default
    3 = all procs, reload of oscam.user possible
    4 = complete access

    expdate = <year>-<month>-<day>|<year>/<month>/<day>
    expiration date for account, default:none

    example: expdate = 2001-11-21
    expdate = 2002/12/22

    disabled = 0|1
    1 = account disabled, default:0

    allowedtimeframe = hh:mm-hh:mm
    account enabled from hh:mm to hh:mm, default:none

    numusers = quantity (only if anti-cascading enabled)
    anti-cascading: user per account, 0 = anti-cascading disabled, default:0

    penalty = 0|1|2 (only if anti-cascading enabled)
    level of penalty:

    0 = only logging (default)
    1 = send fake CWs
    2 = disbable user temporary

    failban = 0|2|4
    mask for IP based blocking:

    0 = ignore (default)
    2 = block IP of a disabled account on connecting
    4 = block IP of a sleeping account while sleeping comes up

    suppresscmd08 = 0|1
    0 = CMD08 for camd3 3.57x/3.78x clients enabled, 1 = CMD08 for camd3 3.57x/3.78x clients disabled, default:0

    keepalive = 0|1
    0 = disable keepalive between server and client connection, default:1

    cccmaxhops = hops
    maximum hops limit for CCcam clients, default:10

    cccreshare = level
    reshare level for CCcam clients, default:10

    -1 = no resharing
    x = resharing for direct peer and share level x

    EXAMPLES
    [account]
    user = username
    pwd = password
    group = 1
    au = myserialmousereader
    services = myservice
    betatunnel = 0100.0001:0101,0100.0002:0101
    caid = 0100
    ident = 0100:000000
    uniq = 1

    SEE ALSO
    list_smargo(1), oscam(1), oscam.ac(5), oscam.cert(5), oscam.conf(5), oscam.dvbapi(5), oscam.guess(5),
    oscam.ird(5), oscam.provid(5), oscam.server(5), oscam.services(5), oscam.tiers(5), oscam.srvid(5)
    merci

  5. #5
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Config oscam pour TNTsat sur DM7025

    comme tu as une dreambox, tu peux ajouter une "section" [dvbapi] a ton oscam.conf
    voila des infos :
    The [dvbapi] section (only if DVB API module enabled)
    enabled = 0|1
    1 = DVB API enabled, default:0

    Create file /tmp/.pauseoscam to pause DVB API, e.g. if STB goes into standby and OSCam remains as SC
    server only.

    user = username
    user name for DVB API client, default:anonymous

    ignore = <CAID>[,<CAID>]...
    CAIDs to be ignored, default:none

    priority = <CAID>:<provider ID>[,CAID:<provider ID>]...
    CAIDs and provider IDs to be prioritized, default:CAIDs and provider IDs of local SCs will be prioritized

    au = 0|1
    1 = enable AU, default:0

    pmt_mode = 0|1|2|3
    PMT mode:
    0 = use camd.socket and PMT file, default
    1 = disable reading PMT file
    2 = disable camd.socket
    3 = read PMT file on startup only

    boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt
    set boxtype, auto detection of DVB API will be aspired, default:dreambox

    ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models
    only

    ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD mod‐
    els only
    ce qui donne a ajouter a ton oscam.conf (sauf erreur):

    Code:
    [dvbapi]
    enabled = 1
    #ignore = <CAID>[,<CAID>]...
    #CAIDs to be ignored, default:none
    #priority = <CAID>:<provider ID>[,CAID:<provider ID>]...
    #CAIDs and provider IDs to be prioritized, default:CAIDs and provider IDs of local SCs will be prioritized
    priority = 0500:FFF400,0500:032900,0500:032910,0500:032920,0500:032930,0500:032940,0500:032950
    au = 1
    #1 = enable AU, default:0
    pmt_mode = 0
    #PMT mode:
    #       0 = use camd.socket and PMT file, default
    #       1 = disable reading PMT file
    #       2 = disable camd.socket
    #       3 = read PMT file on startup only
     
    #boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt
    #      set boxtype, auto detection of DVB API will be aspired, default:dreambox
     
    #      ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models
    #      only
     
    #      ipbox-pmt  can be used on any DGS based images (with or without camd.socket support), verified on HD mod‐
    #      els only
    merci

  6. #6
    Junior Member
    Join Date
    20-11-2010
    Posts
    12
    Uploads
    0

    Re: Config oscam pour TNTsat sur DM7025

    Bonsoir,
    Merci beaucoup pour ton temps et le detail des infos fournies.
    Cependant, je ne comprends pas si le user/pwd a un rapport avec mon cpte Orange ou s'il a d'autres objectifs tel que le card sharing.
    Pour info, cela marche tjs aussi bien.
    Merci encore.
    Bonne soirée.

  7. #7
    VIP Member arabeman14's Avatar
    Join Date
    16-06-2006
    Location
    in front of my PC
    Posts
    688
    Uploads
    33

    Re: Config oscam pour TNTsat sur DM7025

    :)

    tu peux l'enlever...
    c'est les comptes que tu ouvre pour les peer...

  8. #8
    Krell Power passete's Avatar
    Join Date
    20-10-2005
    Location
    france
    Posts
    3,169
    Uploads
    1,318

    Re: Config oscam pour TNTsat sur DM7025

    Quote Originally Posted by blastes View Post
    Bonsoir,
    Merci beaucoup pour ton temps et le detail des infos fournies.
    Cependant, je ne comprends pas si le user/pwd a un rapport avec mon cpte Orange ou s'il a d'autres objectifs tel que le card sharing.
    Pour info, cela marche tjs aussi bien.
    Merci encore.
    Bonne soirée.
    Salut, le user et password, peu servir au webinfo :
    Tape dans le fenetre de internet explorer : http:// ip de la dream:16002 , une fenetre te demandera le user et password, dedans tu veras toutes les infos concernant ta carte/server.

    Faut bien sur entrer le ip de la dream dans le fichier oscam.conf
    Exemple:
    Code:
    httpallowed = ip local de ta Dream
    exemple.jpg

Similar Threads

  1. question dream 7025+
    By monplaisant in forum French / Français
    Replies: 8
    Last Post: 18-08-2009, 10:18:46
  2. Ou acheter une dream 7020 ou 7025
    By desperadochti in forum French / Français
    Replies: 0
    Last Post: 20-07-2009, 22:26:26
  3. 2 servers(dream 7025 and dream 7020)
    By valy_tizu in forum CCcam Exchange: Local
    Replies: 0
    Last Post: 15-01-2009, 01:10:11
  4. dream box 7025 et 500s en sharing ?
    By drak99 in forum French / Français
    Replies: 0
    Last Post: 07-10-2006, 08:30:55
  5. Problema Zapping Dream 7025
    By LAICO in forum Portuguese / Português
    Replies: 2
    Last Post: 25-05-2006, 03:27:55

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •