Results 1 to 5 of 5

Thread: Difference between DM800 and DM800HD SE?

  1. #1

    Difference between DM800 and DM800HD SE?

    Hi everybody,


    I'm newbee, soo I hope y'll understand my question:

    whats de difference between DM800 and DM800HD SE?

    Personally I have a 'cloone' IP800HD from Spain (not very good material!)

    Thanks and best regards

  2. #2
    Super Moderator zed44's Avatar
    Join Date
    05-12-2006
    Posts
    1,018
    Uploads
    9

    Re: Difference between DM800 and DM800HD SE?

    hi

    sorry to answer so late but i didn't noticed the question before

    on Dm800 HD SE, you have two card reader and true HDMI output. CPU is also faster on DM800 SE (400 MHz vs 300 MHz on DM800). Tuner should be différent too but i have no information on it

    regards

  3. #3
    Super Moderator
    Join Date
    19-01-2006
    Posts
    2,922
    Uploads
    0

    Re: Difference between DM800 and DM800HD SE?

    Is DM 800 HD SE have blind search.....?

  4. #4
    Super Moderator zed44's Avatar
    Join Date
    05-12-2006
    Posts
    1,018
    Uploads
    9

    Re: Difference between DM800 and DM800HD SE?

    i don't think so...look to azbox premium + for blind scan under linux box

    regards

  5. #5
    Strict but fair Andrushenka's Avatar
    Join Date
    28-12-2005
    Location
    Heart of Europe
    Posts
    26,529
    Uploads
    106

    Re: Difference between DM800 and DM800HD SE?

    Maybe this can help you:

    DreamBox DM 800 HD PVR


    Technical Features


    • 300 MHz MIPS Processor
    • Linux Operating System
    • OLED - Display
    • MPEG-2 / H.264 Hardware decoding
    • Tuner: DVB-S, optional: DVB-C, DVB-T
    • Tuner Module, Plug&Play
    • 1 x Smartcard-Reader (Dreamcrypt CA)
    • V.24/RS232 Interface
    • 10/100Mbit Ethernet Interface
    • 1 x Scart (RGB, FBAS or S-Video)
    • DVI
    • 2 x USB 2.0
    • analog modem
    • S/PDIF Interface for digital bit stream out (AC-3)
    • 64 MByte Flash, 256 MByte RAM
    • SATA
    • for use either as internal SATA HDD 2,5“
    • or to use for external eSATA


    • unlimited channel lists for TV/Radio
    • channel-change time < 1 second
    • automatic service scan
    • directly bouquet-lists
    • EPG (electronic program guide)
    • multiple LNB-Switching control (supports DiSEqC)
    • OSD in many languages and skin-support
    • Videotext Decoder
    • extern 12V power supply

    Technical data

    DBS-Tuner mit DVB-S2:
    Frequency Range 950 .... 2150 MHz
    Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
    Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
    DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)
    Video decoder:
    Video Compression MPEG-2 and MPEG-1 compatible, H.246
    Video Formats 4:3 / 16:9
    Letterbox for 4:3 TV-Device
    Audio decoder:
    Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
    Audio Mode Dual (main/sub), Stereo
    Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Output analog:
    Output Level L/R 0,5 Vss on 600 Ohm
    THD > 60 dB (1 kHz)
    Crosstalk < -65 dB
    Output digital:
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Output optical, Toslink
    Ausgang Video:
    Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
    Video parameter:
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard
    TV-Scart:
    Output: FBAS, RGB, S-Video
    Serielle Interface RS 232:
    Typ RS232 bidirectional
    Bitrate 115,2 kBit/s max.
    Plug Connector SUB-D-9
    Function: Update of Firmware
    Ethernet:
    10/100 MBit compatible interface
    Function: Update of Firmware
    Analoge modem:
    analoge modem for Internet connection
    SATA Interface:
    - for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD
    USB
    2 x USB 2.0 Host
    LNB power and polarisation per tuner:
    LNB Current 500mA max.; short-circuit-protected
    LNB Voltage vertical < 14V no load, > 11,5V at 400mA
    LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
    Count of active satellite position:
    DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
    Power consumption:
    < 15W at 12V
    External PSU
    Input:
    110-240V AC / 50-60Hz / 0,6A
    Output:
    12V = / 3,0A
    Physical specification:
    Ambient Temperature +15°C...+35°C
    Humidity < 80%
    Size (W x D x H): 195 mm x 140 mm x 40 mm
    Weight: 1,8 kg without HDD

    DreamBox DM 800 HD se

    Technical Features

    • 400 MHz MIPS Processor
    • Enigma 2, Linux Operating System
    • colored OLED - Display
    • MPEG-2 / H.264 Hardware decoding
    • Tuner: DVB-S, optional: DVB-C, DVB-T
    • Tuner Module, Plug&Play
    • 2 x Smartcard-Reader (Dreamcrypt CA)
    • Mini USB for Service and software update
    • 10/100Mbit Ethernet Interface
    • 1 x Scart (RGB, FBAS or S-Video)
    • HDMI
    • 2 x USB 2.0
    • analog modem
    • S/PDIF Interface for digital bit stream out (AC-3)
    • 64 MByte Flash, 256 MByte RAM
    • 2 x SATA
      - for internal HDD 2,5“
      - one external eSATA
    • unlimited channel lists for TV/Radio
    • channel-change time < 1 second
    • automatic service scan
    • directly bouquet-lists
    • EPG (electronic program guide)
    • multiple LNB-Switching control (supports DiSEqC)
    • OSD in many languages and skin-support
    • Videotext Decoder
    • extern 12V power supply

    Technical data

    DBS-Tuner mit DVB-S2:
    Frequency Range 950 .... 2150 MHz
    Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
    Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
    DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)
    Video decoder:
    Video Compression MPEG-2 and MPEG-1 compatible, H.246
    Video Formats 4:3 / 16:9
    Letterbox for 4:3 TV-Device
    Audio decoder:
    Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
    Audio Mode Dual (main/sub), Stereo
    Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Output analog:
    Output Level L/R 0,5 Vss on 600 Ohm
    THD > 60 dB (1 kHz)
    Crosstalk < -65 dB
    Output digital:
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Output optical, Toslink
    Ausgang Video:
    Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
    Video parameter:
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard
    TV-Scart:
    Output: FBAS, RGB, S-Video
    Mini USB service connector:
    Function: Update of Firmware
    Ethernet:
    10/100 MBit compatible interface
    Function: Update of Firmware
    Analoge modem:
    analoge modem for Internet connection
    SATA Interface:
    for internal 2,5" HDD and one eSATA
    USB
    2 x USB 2.0 Host
    LNB power and polarisation per tuner:
    LNB Current 500mA max.; short-circuit-protected
    LNB Voltage vertical < 14V no load, > 11,5V at 400mA
    LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
    Count of active satellite position:
    DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
    Power consumption:
    < 15W at 12V
    External PSU
    Input:
    110-240V AC / 50-60Hz / 0,6A
    Output:
    12V = / 3,0A
    Physical specification:
    Ambient Temperature +15°C...+35°C
    Humidity < 80%
    Size (W x D x H): 225 mm x 145 mm x 52 mm
    Weight: 940 g without HDD

Similar Threads

  1. DREAM DM 600-800 la difference
    By dragans in forum French / Français
    Replies: 0
    Last Post: 12-05-2009, 03:51:30
  2. difference of bin and os
    By martabak in forum Gamma Card
    Replies: 0
    Last Post: 26-04-2009, 11:45:05
  3. Difference between MRV Version
    By hman in forum Matrix Revolution Cam
    Replies: 0
    Last Post: 03-07-2006, 09:42:15
  4. difference 1.170 and 1.180
    By freeflyer in forum Matrix Reloaded Cam
    Replies: 4
    Last Post: 19-05-2006, 16:23:16

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •