Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: VIX Team Vu+ Solo Image

  1. #1
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    VIX Team Vu+ Solo Image

    VIX Team Vu+ Solo Image v2.0 - 09/02/2011








    New VIX Image - v2.0
    07/02/2011 - Open PLi 2.0


    From VIX Team




    Based on Open PLi 2.0

    Yes, you read that correct. We have changed source (hence the long delay in release) to the Open PLi base. Many thanks to them for allowing us to use their base . If they wish to see any of the source code (without ViX specific enhancements of course ), just pm andyblac or Sicilian, and we will gladly send them on to them.

    Since this is a completely new base, you will have to do a full fresh flash. Online updates will not work!!! Also, you will not be able to restore your settings from ViX 1.1 to 2.0. You will have to manually configure your box, as in testing, this has proven to cause many problems and instabilities in the box!

    Enigma: 08-02-2011.
    Enigma Plugins: 08-02-2011.
    GCC Version: 4.4.4.
    Drivers: 20110208

    New Enhancements in v2.0

    As already stated, this version of the release has a completely new base. This has required a lot of recoding to get the ViX enchancements working in the new PLi base... Of course, the image has the same enhancements as previous images, apart from some new additions
    All new version number - Yup, we've moved on to version 2.0! This has nothing to do with the fact that the PLi version is 2.0... We felt that the addition of the dvb-t (wait for it keep reading ) warranted a brand new version number. This also puts the duo and solo in line number wise!
    VIX Duo 2.0 Bootlogos, Radio Logos and Shutdown Logos (thanks again Silver )
    Core changes to plugins and code to allow ViX features to work on Open PLi
    USB DTT - The one you've all been waiting for! To install dvb-t, you just need to go to the plugin menu, and select the stick you have. This will then install the drivers for your stick*. You will then need to restart your receiver. Once restarted, go to Menu -> Setup -> Service Starting -> Tuner Config, and you should notice Tuner C as your USB DTT...
    ViX Quick Event Info - This is the new way to receive the event info on the ViX image. Press OK button once to get the info bar up, press it once more (i.e. a second time) to receive the information about what is currently showing...
    New ViX Single EPG (with channel preview) - The is new and unique to vix, after you open the ViX single EPG (short RED) you can view the 7 day epg for that channel, now to see another channels epg, either use the Channel up/down buttons on your remote or just key in the channel number. if you want to preview the channel your currently viewing the EPG for (ie you want to see what the current program is like) just press 'OK' on your remote, this will change to that channel showing you the program in the small video window. if you don't like it, go find another channel to preview by keying in new channel number (or up/down buttons). or if you do like it and want to go fullscreen on it, just press 'OK' again. but if you feel you want to return to the original channel you where watching (whilst still in ViX Single EPG) just press 'EXIT" button, this will return to where you where before you entered ViX Single EPG)
    QuickEPG Updated to include channel preview - works as above
    Debug Logs - This is to enable a better idea of what's been happening with the image for any crashes ... If your box crashes, check the /home/root/ folder, and look for a file that has the date/time modified as to when the box crashed. This can help find any bugs/issues easier To enable/disable this option, go to the ViX Settings. To clear the debug logs, choose yes. This will just delete the debug logs once. If you want to delete the logs again, just go back in to the menu, and change to yes again...
    Bigger skin choice - OK, lots of people wanted a bigger choice of skins ... we've added lots more skins Also, most skins made for PLi 2.0 should work in ViX 2.0 also. If there are certain parts of the skin not edited for the ViX format (such as ViX menu, ViX Devices Manager, etc), then this should still work just fine. These menus have been hard coded to ensure that they will work if nothing included in to the skin...
    Added option to disable ViX coloured buttons - This should ensure that if users want to use MultiQuick button plugin, it should work without issue
    All of the PLi enhancements - This includes the infamous subtitles requested by many As well as auto audio/subtitle language selection, etc, etc).
    Please also note that USB / ESATA devices NEED there mount points setup in Device Manager (green button whilst in Device Manager) in order for them to work correctly.

    * Supported USB DVB-T:
    Avermedia Volar HD Nano
    Sundtek Media TV Pro
    WinTV Nova T


    Bug Fixes in v2.0
    Motor moving image does not display - Fixed by Vu in latest drivers.
    Installing other skins may cause the box to get into an infinite loop - Since moving over to the PLi image, changes have been made to the way the image works with skins. Now, most skins created for the PLi image should work on the ViX image.

    Button Mappings
    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs
    Front VFD display showing the play button at the end of a video unless it is stopped manually - Problem with main driver, reported to VU+.
    Few problems with WebIf Remote Control coloured buttons in timeshift/playback mode - E.G. The blue button decides to fast forward, not show the extensions menu.
    Network mounts not remounting if the source goes offline - You should be able to go in to the network menu, and choose "Mount Again", but this doesn't seem to be working.

    Special thanks to the following members:
    rytec - for his continued support.
    PLi Team for their great base image and allowing us to use it.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working


    Screenshots



































    download

    nfi

    Code:
    NFI Installer: http://www.megaupload.com/?d=GKPLMXAP

    usb


    Code:
    USB Installer: http://www.megaupload.com/?d=7ON1DQ4H

  2. #2
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: VIX Team Vu+ Solo Image




    New VIX Image VU+ Solo - v2.2
    11/06/2011 - Open ViX 2.2
    Based on Open PLi 2.0



    From VIX Team


    Enigma: 11-06-2011.
    Enigma Plugins: 11-06-2011.
    GCC Version: 4.4.4.
    Drivers: 20110610.

    ViX is now embedded within the image even more. A lot of settings have been moved out of the ViX menus, and incorporated within the image. Settings from previous images may not be 100% compatible, and it might be best to re-setup your image without restoring system settings for 100% reliability.

    If you have previously used NetworkBrowser to mount network mounts, please remove '/etc/enigma2/automounts.xml' BEFORE tying to setup news ones.

    Team ViX Enchancements

    ViX Bootlogos, Radio Logo.
    ViX Team Spinner.
    ViX Team ViX_HD Skin.
    ViX Team softcam manager - Lots of changes have been made here. You can now choose whether you want to check whether your cams are running by pressing menu in the softcam screen. You can also check the status of your cam checks by pressing the info button. Also, lots of behind the scenes checks to ensure no restarts of cams when it is actually running.
    ViX Image Manager Update - This has been overhauled, and now has the option of creating a schedule to do daily, weekly or every 30 days backups for you.
    ViX Cron Manager Update - This has been updated to allow more detailed and specific cron jobs to be created.
    ViX Single EPG (with channel preview) - This has been updated to now support picons.
    ViX Release notes - This is just a little screen within the Menu -> Information -> About, that appears when you press EPG/Info button, to tell you the latest updates for the image.
    ViX Update Checker - This is a feature that lets you know of any available online updates by a little globe symbol in the infobar. This is set to check every 12 hours whether there are any updates for the image (can be changed in settings). If so, the icon will change from inactive to active...
    ViX Logs Manager - This allows you to manager your crashlogs and system logs (if enabled). If you have a crash, you can email your bugs to us directly from the image. Go to Menu -> Setup -> System -> Logs. When in the Logs Manager, you can edit the configuration to show your forum username, and your email address by pressing the Menu button. Please ensure you do this before submitting logs!
    ViX Settings - These are now found in the main System Menu.
    ViX Simple TV List - This is a simple selection to show your bouquet lists, just showing the channels and current event (if in EPG). To access the Simple TV List, do a long up/down arrow button press. You can customised it to be the default option instead of Full Screen Channel List, in which case, Up/Down buttons are reversed. It can also be set in the ViX Settings for the TV button.
    AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info. This has been updated to use threading, so that it will work in the background. No more spinning when checking for lots of timers. Default behaviour has been changed so that it does not check in standby only, and will check every 30 minutes.
    CCcamInfo - CCcamInfo plugin built directly in to image.
    OscamInfo - OscamInfo plugin built directly in to image.
    CrossEPG - Updated to latest release to allow better EPG importing.
    Movie Player - Now, when playing a recorded item, you can search EPG and add Auto Timers for the particular recording. When watching your recording, press yellow to search the EPG, then press blue to add an AutoTimer.

    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    • "Link-Icon" in network doesn't show up (= grey instead of green).
    • Radio mp3 stream crashes after some time (sometimes only > 1 hour). Once that occurs, TV is also without sound. A reboot is then required. There might be a relation with Shoutcast (in use or just installed).
    • A second subtitle in AVI, MP4 etc doesn't show up. Debugging in E2 just stops.
    • In Partnerbox (remote TV-Player) the audiobutton causes a crash.6


    Special Thanks

    rytec - for his continued support.
    PLi Team for their great base image and allowing us to use it.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working


    Code:
    http://www.mediafire.com/?z6lkues564d281t

  3. #3
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    ViX Team Vu+ Solo Image v2.2 İmaj Backup @isayuksel

    ViX Team Vu+ Solo Image v2.2 İmaj Backup @isayuksel 29/06/2011

    Code:
    First, download the latest version of the new image to usb cihazımıza installing: Installation Instructions for the picture Vu + Solo USB Stick
    
    Needs to be done after the installation, after installation, settings::
    
    quote:
    
    
    
    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    DHCP on the network.
    
    Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.
    
    To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create
    
    We check our config for the network.
    
    Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
    
    
    Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).
    
    quote:
    
    
    
    Twin VU + Duo & Solo & ET-9000 HDTV Channel Setting Uploaded on 27 June 2011 the channel settings. @ galaxy2002
    
    Be sure to reboot after installing the device to the channel settings.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    
    Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
    
    Menu => Accessories => Green Button (Download Extension) a is pressed.
    Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.
    
    Quote:
    
    
    
    Downloadable add-ons => systemplugins was established under the Autoresolution
    Downloadable add-ons => systemplugins was established under the setpasswd
    Downloadable add-ons => extensions under the permanentclock
    Downloadable add-ons => extensions was established under the simplerss
    Downloadable add-ons => extensions was established under the virtualzap
    Downloadable add-ons => extensions was established under the vlcplayer
    Downloadable add-ons => extensions was established under the weatherplugin
    
    Emu are doing the installation of:
    
    wixcam.rar file included in the download folder "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" file via ftp device of the / tmp folder, send out the bottom. Menu> Setup> VIX> IPK installer to come and "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" We see the file. Kumandamızın the OK button (or pressing the green button kumandamızdaki) by pressing the yes on that question while we do the installation by pressing the OK button kumandamızın. We acknowledge again başlatmayıda.
    
    Enigma2-plugin-cams in the same way, the do-mgcamd.1.35a_1.0-r3_mipsel.ipk installation.
    
    mg_cfg file / usr / send keys under.
    
    CCcam.cfg file / etc folder is located. This file server uses the knowledge should not to enter.
    
    Quote:
    
    
    
    CCcam 2.2.1 Installed | Installed Mgcamd 1.3.5a | Bulsat Patch File is loaded.
    Bulsat Patch File Download:
    Bulsatcom mgcamd_1.35a download Patched by pinkyto0o Enigma2 çıkarıyoruz zipten. Zipten extracted in the folder
    mgcamd_1.35a file via ftp / usr / softcams under the taking.
    do chmod 755 value.
    
    
    Quote:
    
    
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    
    When you want to set up as external plugins. Ipk file via ftp / tmp directory after a workout
    Menu> Setup> VIX> IPK installer to come and we want to set up even though the file was selected Kumandamızın after seeing the OK button (or pressing the green button kumandamızdaki) by pressing the yes on that question while we do the installation by pressing the OK button kumandamızın.
    >>>Download<<<

  4. #4
    VIP Member
    Join Date
    12-02-2011
    Location
    «•»Albania«•»
    Posts
    4,395
    Uploads
    3,139

    Re: ViX Team Vu+ Solo Image v2.2 İmaj Backup @isayuksel

    21.7.2011



    New VIX Image VU+ Solo - v2.2.100
    21/07/2011 - Open ViX 2.2.100
    Based on Open PLi 2.0

    From VIX Team

    Enigma: 21-07-2011.
    Enigma Plugins: 21-07-2011.
    GCCVersion: 4.4.4.
    Kernel Version: 2.6.18.
    Drivers: 20110708.

    If you wish to perform an online update, then you will be able to upgrade your v2.2 image to v2.2.1 via the online functions. This full image is available for those who do not have online functionality on their box, or wish to perform a full reflash...

    Team ViX Enchancements

    New Features

    BackupManager - Lets you create scheduled backups of your system files (not full Image like Image Manager).
    RestoreWizard - This a wizard that detects and restores you backup (created with BackupManager), with option to restore your extra plugins.
    ImageManager - Major code rewrite, now handled by Job task, view progress of image creation in extension list (blue button)
    ViX Menu - Added PackageManagement & Software Update, so SoftwareManager is now not needed. It is also now translatable into different languages.
    NetworkInadyn - Add new network setup screen Inadyn.
    OScam/CCam Info - Added options to show in Extension List. (the Menu item will now only show IF the softcam is installed).
    OnlineVersionCheck - Added option to disable online check by setting check value to '0' and set a maximun timer to 48 hours.
    Recording List - Added a new option in MovieList Settings to use a "Slim" list like the "Slim" Channel slection screen.
    EPG Graphical - This is now in core, no longer a plugin (was ViXEPG), added the option to show Bouquets on launch.
    EPG Menu - Add Load/Save item, this allow you reload/save the EPG cache.
    E2-Plugin's - Updated all to plugin's to the latest GIT from PLi.
    ZAP Timer - This will create a zap timer (rather than a recording timer) for the selected event in the EPG/Single EPG etc. To activate this, select the event from the EPG, and do a long button press on the record button. This is a non-configurable timer, so will use all defaults, and just set the record to a zap, rather than a record. When adding a zap timer, the clock icon will show on the previous event. This is to do with the pre-start timer.

    Fixes

    SwapManager - Code cleanup, for better activation/detecion.
    About Screen - Updated infomation screen, better layout, more information. VFD now shows image version.
    EPG Search - Fix a bug where the yellow button just opened a blank EPGSearch screen instead of actually perfoming a search on the current event. Also, added 'Show History' to long yellow button press whilst in EPGSearch.
    EPG Cache - Updated so now it does not require 2 reboots in order to use new location.
    EventView - Fix GS on opening Similar List.
    Network Link State - fixed Vu+ machine network link state.
    PluginBrowser - fix it not installing picons.
    ShoutCast - Fixed plugin.
    SoftcamManager - Add Timercheck for OScam to support no username or password in Webif, fix GS when pressing coloured buttons, if no softcams installed, also code clean up.
    Translation - Updated NL language files.
    [B]Permantent TimeShift fix and embed PTS.
    Updated KeyMap - Fixes a few MoviePlayer remote control issues.
    ViX HD skin - PNG fix for selected items in lists, Tweaked the Jobview screen, 'New Online Version' icon now flashes to remind you of an update.
    VIXEPG fix - The < > keys for jumping +/- 1 day.
    NetworkBrowser - fix GS when creating CIFS mounts.
    RemoteSetup fix GS when showCoolTVGuide is selected.


    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    Second subtitles in AVI, MP4 etc often need a stepskip to enable them to show up.
    Shoutcast has no genrelists and menu is not working.


    Special Thanks

    rytec - for his continued support.
    PLi Team for their great base image and allowing us to use it.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working


    Screenshots


    DOWNLOAD

  5. #5
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: ViX Team Vu+ Solo Image v2.2 İmaj Backup @isayuksel

    There are online updates for the Vix image to bring you up to version Vix 2.2.109

    after the update go to information/about/info to see release notes

  6. #6
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    Re: VIX Team Vu+ Solo Image




    New VIX Image Vu+ Solo - v2.3
    19/11/2011 - Open ViX 2.3



    From VIX Team


    Enigma: 18-11-2011.
    Enigma Plugins: 18-11-2011.
    GCC Version: 4.4.4.
    Kernel Version: 2.6.18.
    Drivers: 2011-11-14.

    Because of a lot of changes behind the scenes of the image and building, you will not be able to perform an online update. A full flash is required for this version of ViX image. Due to many changes (a.o. renamed settings) it is strongly advised NOT to restore old settings. Of course channel-settings can be backed up using a setting editor and restored later. We strongly recommend that after installing channel settings from feeds or uploading your own that you re-scan all satellites used to avoid any future issues.

    This revision of the image has undergone many different builds, hours and hours of coding/fixing, and we hope that you are now happy to reflash with the latest ViX image! :D

    Team ViX Enchancements

    New Features

    Added items to the Information Screen - Added Devices and System Information to Menu -> Information. In Devices, you get all the information about connected devices on your box (HDD, USB and Network Shares), and System Information will show you your memory on your box (Swap, Free memory etc).
    Added OSD Settings - This replaces the overscan option within the ViX image. Go to Menu -> Setup -> System -> OSD -> OSD Setup, and ensure the screen fills your TV set exactly to ensure that all menu options are shown correctly for your TV.
    Added blindscan - Now, ET9000 and Vu+ Uno both have blindscan ability incorporated in to the image. And, best of all, a nice simple scan routine for it. You can choose to scan all horizontal and vertical polaritys, as well as high and low bands all in one pass. Save having to run the blind scan for each individually :thumsbup:.
    Added support for HDMI-CEC - This image now allows you to control your box using your tv remote. Remember, this is still experimental at the moment, and can work differently between different brands of TV makes/models.
    Added uShare - Allow the box to be detected by your DLNA devices that support this protocol. This can be configured under Menu -> Setup -> System -> Network -> uShare Setup.
    Added AFP - The Apple Fileshare Protocol makes it easy for your OSX devices to find your box and use the box natively within the OS. This can be configured from Menu -> Setup -> System -> Network -> AFP Setup.
    Added EPG Automatic Refresh/Save - These are useful for members who keep a single EPG datasource on a network share with multiple boxes. In Menu -> Setup -> System -> EPG -> Settings, you have the option to choose a network location (as long as configured within the NetworkBrowser). If you use this, you might want to update the EPG data from this location automatically. So now you can using the Automatic Refresh option on a client box, and Setup the Automatic Save option on a server box (the box that update the epg data.). Do not use these options both on same box.
    Added Automounts option - This allows the box to automatically recreate network mounts. If you've had times where the NFS of CIFS server has been restarted, or lost power etc, then you'll know that your box cannot access this network share. Well, as long as you have configured the share through the Mount Manager, then you can configure the Automount to automatically remount the share as often as you like by going to Menu -> Setup -> System -> Network -> Devices -> MountManager.
    Default Skin Change - The Default skin has been changed from ViX HD to ViX Day HD. Another ViX skin has been developed for download from the plugin server under the ViX section, called ViX Night HD. This is for those who want a darker skin for their image. Please report any skin issues you may find with the ViX Night HD skin. We think we have them all covered, but can't be too sure...
    Many plugins translated/made translatable - Allows the plugins to display correctly the information in your own language (as defined on original setup).
    Added seekbar functionality to the image - Allow you to seek within a recording playback to where you would like to be within the playback. To utilise this, please hold down the << or >> buttons on your remote, and the seekbar will appear at the top. Use the arrow **** on the remote to choose where you would like to seek to in the playback, and press OK to start playback from this point.
    Added Image Download to Image Manager - This allows you to download the latest full image from the server, and flash it to your box. To access this, go to the Image Manager from with ViX menu, and press the help button. This will list all available images to download.
    Lots more under the hood updates/enhancements - A few menu options and screens have become more integrated to their respective menus. For example, the Recording Paths menu is no longer required, as Timeshift Path is defined in Timeshift Setup, and Recording Path in Recording Setup.

    Fixes

    Corrected a number of plugins.
    Updated network components, including better support for WiFi.
    Updated translatability; updated German & Dutch translations.
    Hidden several ViX-core functions from the plugin-browser.
    Better handling of SWAP partitions by the Mount Manager.
    Audio Button - The audio button now works as advertised.

    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Special Thanks


    • rytec - for his continued support.
    • zoka.cc for his Picon sets
    • all developers for their plugins used in the feeds of this image.
    • All of the ViX Beta team for their hours of testing and dedication on getting this image working.
    • 'Rob van der Does' & 'belierzz' for their translation work.
    • Silverfox0786 for channel settings and picons.


    Requests

    If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian...

    Downloads

    http://www.multiupload.com/DGK39BSPE1

  7. #7
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    Re: VIX Team Vu+ Solo Image

    Added updated image ViX-2.3.133, contains all fixes and updates up to 13/12/2011. No need to re-flash, existing GM users can use online software update feature.


    New Features:
    Channel Selection - Added NEXT event name and description (see screenshot).


    Fixes:
    ImageManager - fix image downloads.
    Reverted inadyn to Ver:1.96
    Fix wizard remote in ViX Skins.
    MovieSelection - stop END showing when starting a new movie, when the previoius movie ended whilst movielist was showing.
    Tweaked the way movie description is gathered.

  8. #8
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    Re: VIX Team Vu+ Solo Image

    Vu Solo ViX 2.3 (Linux 3.1.1)



    New VIX Image Vu+ Solo - Build 153
    24/12/2011 - Open ViX 2.3



    From VIX Team


    Enigma: 24-12-2011.
    Enigma Plugins: 24-12-2011.
    GCC Version: 4.4.4
    Kernel Version: 3.1.1
    Drivers: 2011-12-22

    To use this release, you will need to flash the bootloader before flashing the image

    Because of kernel change, you will not be able to perform an online update. A full flash is required for this version of ViX image. But you can use Backup Manager to backup your setting, although any extra plugin will not be reinstalled by the wizard due to the kernel change.



    New Features

    Subtitle structure - Has been changed and now where subtitles are available you will be able to select subtles either via the subtitles Menu or via the Audio Menu then Yellow button
    Where Subtitles are not available you will not be able to bring up the Subtitle Menu or see the Yellow button via the Audio Menu
    This is not a bug but rather a change in the Subtitle structure

    OpenWebIf - this now how has replaced the old WebIf, and as a result it uses the default port of 8088, if you want you can change it back to 80 in the plugin setup.

    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Special Thanks


    • rytec - for his continued support.
    • zoka.cc for his Picon sets
    • all developers for their plugins used in the feeds of this image.
    • All of the ViX Beta team for their hours of testing and dedication on getting this image working.
    • 'Rob van der Does' & 'belierzz' for their translation work.
    • Silverfox0786 for channel settings and picons.


    Requests

    If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian...

    Downloads

    image
    Code:
    http://www.megaupload.com/?d=LBVVSKUZ
    bootloader
    Code:
    http://www.megaupload.com/?d=PGVLBO9K

  9. #9
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    Re: VIX Team Vu+ Solo Image



    New VIX Image Vu+ Solo Version 2.4

    15/05/2012 - Open ViX 2.4.96


    From VIX Team


    Enigma: 04-05-2012.
    Enigma Plugins: 04-05-2012.
    GCC Version: 4.4.4
    Vu + Kernel Version: 3.1.1
    Vu+ Drivers: 2012-02-28

    If you have not already done so you will need to flash the latest bootloader

    All Users
    A full flash is required for this version of ViX image. Because of extensive changes you will not be able to perform an online update or restore any settings/plugin backups.

    New Features
    Blindscan
    Now uses RF values in GUI not IF.
    C band searches possible.
    Supports symbol rates from 1 - 45MHz.

    Channel Selection
    Support added to change font sizes and number of rows.
    Support added to have a 3rd event showing (Skin Dependent)
    Support added to display start time and end time for all events shown.

    EPG Selection
    Added help screen to all epg selection screens.
    Added support to change font sizes and number of rows.

    Language Selection
    Added English (UK) to available languages.

    Translations
    Added support for English (UK).

    Sorting
    You may now sort Menus, Settings and Plugin Browser alphabetically.

    Network Browser
    Uses less memory during Scan.
    Moved to new Setup Mounts screen.
    Openwebif
    New style webif now accessed using default port 80
    Old style webif still available if required for use with certain PC signal meters and Fancontrol 2

    About Screen
    Added network info.
    Plugins
    As part of streamlining the image, removed NFS, AFP, Samba, OpenVPN, Inadyn, MiniDLNA & uShare from default image (can now be installed/de-installed through Network setup screen)
    Bootlogo's
    Now available for direct install via plugins feed.

    On Screen Hints
    Now available as options are selected.
    USB DVB
    Added dvb-as102 support (by Gennart1).
    Skin
    Brand New skin ViXBMC by markus625 added to feeds.
    Native skins updated and optimised.
    Instant Record from channel list, EPG or current channel.
    Enhanced Movie List Features


    Latest Drivers (28/2/2012).
    Loads of under the hood changes made for a smoother user experience.

    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red ** & *** - Sort single EPG info when in channel list.

    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - Instant IMDB Database search on the current programme.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.
    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Special Thanks


    • rytec - for his continued support.
    • zoka.cc for his Picon sets
    • All developers for their plugins used in the feeds of this image.
    • All of the ViX Beta team for their hours of testing and dedication on getting this image working.
    • Rob van der Does, belierzz, rimas, Henkka, raivo, eesatfan, Zartmy, Trial & june8 for their translation work.
    • Silverfox0786 for channel settings, picons and bootlogo's.
    • Huevos for his work on blindscan
    • Gennart1 for dvb-as102 support
    • Markus625 for skin ViXBMC

    Note: Not all 3rd party plugins have been tested or are guaranteed to be compatable.

    R
    equests

    If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian

    Download

    Download site for Latest Open Vix Builds (Beta's) www.openvix.co.uk

    Stable release below

    Bootloader for those that need it is the first file



    Download

  10. #10
    Super Moderator Predr@g's Avatar
    Join Date
    02-08-2007
    Posts
    3,071
    Uploads
    674

    Re: VIX Team Vu+ Solo Image

    OpenViX 3.0-678 AVAILABLE NOW


    images can be downloaded directly from the openvix server
    or via a online update

    menu> setup> software update.

    or via a telnet session with the following command

    init 4 && opkg update && opkg upgrade && init 6



    DOWNLOAD

Page 1 of 2 12 LastLast

Similar Threads

  1. VTi Vu+ Solo Team Image
    By aguda in forum Vu+ Solo Images
    Replies: 28
    Last Post: 06-12-2017, 20:43:01
  2. Update AAF team Image for VU+ Solo
    By wahid in forum Vu+ Solo Images
    Replies: 22
    Last Post: 06-08-2012, 20:28:32
  3. Vu+ SOLO Image Original
    By aguda in forum Vu+ Solo Images
    Replies: 23
    Last Post: 11-10-2011, 11:19:11
  4. New Addons Server BH image for Vuo+ Duo/Solo
    By aguda in forum Vu+ Plugins
    Replies: 0
    Last Post: 18-11-2010, 17:29:41
  5. Skin's update's for VTI - Image v.2.0 SOLO
    By wahid in forum Vu+ Picons and Skins
    Replies: 0
    Last Post: 11-09-2010, 08:12:32

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •