Results 1 to 6 of 6

Thread: Vacommb4.bpl.

  1. #1
    Senior Member
    Join Date
    20-05-2008
    Location
    derriere le pc
    Posts
    101
    Uploads
    1

    Vacommb4.bpl.

    bonjour

    j ai charge un soft mais je peux pas l ouvrir "" VACOMMB4.BPL...... est introuvable!!"" j ai fais des recherchent mais rien !! je cherche donc ce fichier merci ... numero 6

  2. #2

    Re: Vacommb4.bpl......

    bonjour

    je le cherche aussi
    merci

  3. #3

    Re: Vacommb4.bpl......

    a complier en delphi

    mais les glithc du soft ne sont pas les bons ne revez pas lol

    # --------------------------------------------------------------------------- !if !$d(BCB) BCB = $(MAKEDIR)\.. !endif # --------------------------------------------------------------------------- # IDE SECTION # --------------------------------------------------------------------------- # The following section of the project makefile is managed by the BCB IDE. # It is recommended to use the IDE to change any of the values in this # section. # --------------------------------------------------------------------------- VERSION = BCB.04.04 # --------------------------------------------------------------------------- PROJECT = VaCommb4.bpl OBJFILES = VaReg.obj VaCommb4.obj RESFILES = RESDEPEN = $(RESFILES) LIBFILES = LIBRARIES = SPARELIBS = VCL40.lib PACKAGES = vcl40.bpi DEFFILE = # --------------------------------------------------------------------------- PATHCPP = .; PATHASM = .; PATHPAS = .; PATHRC = .; DEBUGLIBPATH = $(BCB)\lib\debug RELEASELIBPATH = $(BCB)\lib\release USERDEFINES = SYSDEFINES = _RTLDLL;NO_STRICT;USEPACKAGES # --------------------------------------------------------------------------- CFLAG1 = -I$(BCB)\include;$(BCB)\include\vcl -Od -Hc -H=$(BCB)\lib\vcl40.csm -w -Ve -r- \ -a8 -k -vi- -c -b- -w-par -w-inl -Vx -tWM -D$(SYSDEFINES);$(USERDEFINES) PFLAGS = -U$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\lib;$(R ELEASELIBPATH) \ -I$(BCB)\include;$(BCB)\include\vcl -H- -W- -$Y- -$W -$O- -$L- -$I- -$D- -$C- \ -v -JPHNE -M RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zd LFLAGS = -L$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\lib;$(R ELEASELIBPATH) \ -D"TMS Async32" -aa -Tpp -x -Gn -Gl -Gi -v # --------------------------------------------------------------------------- ALLOBJ = c0pkg32.obj Memmgr.Lib $(PACKAGES) sysinit.obj $(OBJFILES) ALLRES = $(RESFILES) ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mti.lib # --------------------------------------------------------------------------- !ifdef IDEOPTIONS [Version Info] IncludeVerInfo=0 AutoIncBuild=0 MajorVer=1 MinorVer=0 Release=0 Build=0 Debug=0 PreRelease=0 Special=0 Private=0 DLL=0 Locale=1043 CodePage=1252 [Version Info Keys] CompanyName= FileDescription= FileVersion=1.0.0.0 InternalName= LegalCopyright= LegalTrademarks= OriginalFilename= ProductName= ProductVersion=1.0.0.0 Comments= [HistoryLists\hlIncludePath] Count=1 Item0=$(BCB)\include;$(BCB)\include\vcl [HistoryLists\hlLibraryPath] Count=1 Item0=$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\li b [HistoryLists\hlDebugSourcePath] Count=1 Item0=$(BCB)\source\vcl [Debugging] DebugSourceDirs=$(BCB)\source\vcl [Parameters] RunParams= HostApplication= RemoteHost= RemotePath= RemoteDebug=0 [Compiler] InMemoryExe=0 ShowInfoMsgs=0 !endif # --------------------------------------------------------------------------- # MAKE SECTION # --------------------------------------------------------------------------- # This section of the project file is not used by the BCB IDE. It is for # the benefit of building from the command-line using the MAKE utility. # --------------------------------------------------------------------------- .autodepend # --------------------------------------------------------------------------- !if !$d(BCC32) BCC32 = bcc32 !endif !if !$d(CPP32) CPP32 = cpp32 !endif !if !$d(DCC32) DCC32 = dcc32 !endif !if !$d(TASM32) TASM32 = tasm32 !endif !if !$d(LINKER) LINKER = ilink32 !endif !if !$d(BRCC32) BRCC32 = brcc32 !endif # --------------------------------------------------------------------------- !if $d(PATHCPP) .PATH.CPP = $(PATHCPP) .PATH.C = $(PATHCPP) !endif !if $d(PATHPAS) .PATH.PAS = $(PATHPAS) !endif !if $d(PATHASM) .PATH.ASM = $(PATHASM) !endif !if $d(PATHRC) .PATH.RC = $(PATHRC) !endif # --------------------------------------------------------------------------- $(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE) $(BCB)\BIN\$(LINKER) @&&! $(LFLAGS) + $(ALLOBJ), + $(PROJECT),, + $(ALLLIB), + $(DEFFILE), + $(ALLRES) ! # --------------------------------------------------------------------------- .pas.hpp: $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< } .pas.obj: $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< } .cpp.obj: $(BCB)\BIN\$(BCC32) $(CFLAG1) -n$(@D) {$< } .c.obj: $(BCB)\BIN\$(BCC32) $(CFLAG1) -n$(@D) {$< } .c.i: $(BCB)\BIN\$(CPP32) $(CFLAG1) -n. {$< } .cpp.i: $(BCB)\BIN\$(CPP32) $(CFLAG1) -n. {$< } .asm.obj: $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@ .rc.res: $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $< # ---------------------------------------------------------------------------

  4. #4
    VIP Member Grizou0's Avatar
    Join Date
    27-03-2005
    Posts
    558
    Uploads
    37

    Re: Vacommb4.bpl......

    Quote Originally Posted by fox62 View Post
    a complier en delphi

    mais les glithc du soft ne sont pas les bons ne revez pas lol

    # --------------------------------------------------------------------------- !if !$d(BCB) BCB = $(MAKEDIR)\.. !endif # --------------------------------------------------------------------------- # IDE SECTION # --------------------------------------------------------------------------- # The following section of the project makefile is managed by the BCB IDE. # It is recommended to use the IDE to change any of the values in this # section. # --------------------------------------------------------------------------- VERSION = BCB.04.04 # --------------------------------------------------------------------------- PROJECT = VaCommb4.bpl OBJFILES = VaReg.obj VaCommb4.obj RESFILES = RESDEPEN = $(RESFILES) LIBFILES = LIBRARIES = SPARELIBS = VCL40.lib PACKAGES = vcl40.bpi DEFFILE = # --------------------------------------------------------------------------- PATHCPP = .; PATHASM = .; PATHPAS = .; PATHRC = .; DEBUGLIBPATH = $(BCB)\lib\debug RELEASELIBPATH = $(BCB)\lib\release USERDEFINES = SYSDEFINES = _RTLDLL;NO_STRICT;USEPACKAGES # --------------------------------------------------------------------------- CFLAG1 = -I$(BCB)\include;$(BCB)\include\vcl -Od -Hc -H=$(BCB)\lib\vcl40.csm -w -Ve -r- \ -a8 -k -vi- -c -b- -w-par -w-inl -Vx -tWM -D$(SYSDEFINES);$(USERDEFINES) PFLAGS = -U$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\lib;$(R ELEASELIBPATH) \ -I$(BCB)\include;$(BCB)\include\vcl -H- -W- -$Y- -$W -$O- -$L- -$I- -$D- -$C- \ -v -JPHNE -M RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zd LFLAGS = -L$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\lib;$(R ELEASELIBPATH) \ -D"TMS Async32" -aa -Tpp -x -Gn -Gl -Gi -v # --------------------------------------------------------------------------- ALLOBJ = c0pkg32.obj Memmgr.Lib $(PACKAGES) sysinit.obj $(OBJFILES) ALLRES = $(RESFILES) ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mti.lib # --------------------------------------------------------------------------- !ifdef IDEOPTIONS [Version Info] IncludeVerInfo=0 AutoIncBuild=0 MajorVer=1 MinorVer=0 Release=0 Build=0 Debug=0 PreRelease=0 Special=0 Private=0 DLL=0 Locale=1043 CodePage=1252 [Version Info Keys] CompanyName= FileDescription= FileVersion=1.0.0.0 InternalName= LegalCopyright= LegalTrademarks= OriginalFilename= ProductName= ProductVersion=1.0.0.0 Comments= [HistoryLists\hlIncludePath] Count=1 Item0=$(BCB)\include;$(BCB)\include\vcl [HistoryLists\hlLibraryPath] Count=1 Item0=$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\li b [HistoryLists\hlDebugSourcePath] Count=1 Item0=$(BCB)\source\vcl [Debugging] DebugSourceDirs=$(BCB)\source\vcl [Parameters] RunParams= HostApplication= RemoteHost= RemotePath= RemoteDebug=0 [Compiler] InMemoryExe=0 ShowInfoMsgs=0 !endif # --------------------------------------------------------------------------- # MAKE SECTION # --------------------------------------------------------------------------- # This section of the project file is not used by the BCB IDE. It is for # the benefit of building from the command-line using the MAKE utility. # --------------------------------------------------------------------------- .autodepend # --------------------------------------------------------------------------- !if !$d(BCC32) BCC32 = bcc32 !endif !if !$d(CPP32) CPP32 = cpp32 !endif !if !$d(DCC32) DCC32 = dcc32 !endif !if !$d(TASM32) TASM32 = tasm32 !endif !if !$d(LINKER) LINKER = ilink32 !endif !if !$d(BRCC32) BRCC32 = brcc32 !endif # --------------------------------------------------------------------------- !if $d(PATHCPP) .PATH.CPP = $(PATHCPP) .PATH.C = $(PATHCPP) !endif !if $d(PATHPAS) .PATH.PAS = $(PATHPAS) !endif !if $d(PATHASM) .PATH.ASM = $(PATHASM) !endif !if $d(PATHRC) .PATH.RC = $(PATHRC) !endif # --------------------------------------------------------------------------- $(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE) $(BCB)\BIN\$(LINKER) @&&! $(LFLAGS) + $(ALLOBJ), + $(PROJECT),, + $(ALLLIB), + $(DEFFILE), + $(ALLRES) ! # --------------------------------------------------------------------------- .pas.hpp: $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< } .pas.obj: $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< } .cpp.obj: $(BCB)\BIN\$(BCC32) $(CFLAG1) -n$(@D) {$< } .c.obj: $(BCB)\BIN\$(BCC32) $(CFLAG1) -n$(@D) {$< } .c.i: $(BCB)\BIN\$(CPP32) $(CFLAG1) -n. {$< } .cpp.i: $(BCB)\BIN\$(CPP32) $(CFLAG1) -n. {$< } .asm.obj: $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@ .rc.res: $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $< # ---------------------------------------------------------------------------
    Si je comprend bien, le soft serait un fake donc, tu me traîtes de menteur?
    Avant de faire le king à décompiler les softs et a rien comprendre, tu ferais mieux d'étudier le process et d'éviter tes ventardises sur le forum.

  5. #5

    Re: Vacommb4.bpl......

    Quote Originally Posted by fox62 View Post
    a complier en delphi

    mais les glithc du soft ne sont pas les bons ne revez pas lol

    # --------------------------------------------------------------------------- !if !$d(BCB) BCB = $(MAKEDIR)\.. !endif # --------------------------------------------------------------------------- # IDE SECTION # --------------------------------------------------------------------------- # The following section of the project makefile is managed by the BCB IDE. # It is recommended to use the IDE to change any of the values in this # section. # --------------------------------------------------------------------------- VERSION = BCB.04.04 # --------------------------------------------------------------------------- PROJECT = VaCommb4.bpl OBJFILES = VaReg.obj VaCommb4.obj RESFILES = RESDEPEN = $(RESFILES) LIBFILES = LIBRARIES = SPARELIBS = VCL40.lib PACKAGES = vcl40.bpi DEFFILE = # --------------------------------------------------------------------------- PATHCPP = .; PATHASM = .; PATHPAS = .; PATHRC = .; DEBUGLIBPATH = $(BCB)\lib\debug RELEASELIBPATH = $(BCB)\lib\release USERDEFINES = SYSDEFINES = _RTLDLL;NO_STRICT;USEPACKAGES # --------------------------------------------------------------------------- CFLAG1 = -I$(BCB)\include;$(BCB)\include\vcl -Od -Hc -H=$(BCB)\lib\vcl40.csm -w -Ve -r- \ -a8 -k -vi- -c -b- -w-par -w-inl -Vx -tWM -D$(SYSDEFINES);$(USERDEFINES) PFLAGS = -U$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\lib;$(R ELEASELIBPATH) \ -I$(BCB)\include;$(BCB)\include\vcl -H- -W- -$Y- -$W -$O- -$L- -$I- -$D- -$C- \ -v -JPHNE -M RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zd LFLAGS = -L$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\lib;$(R ELEASELIBPATH) \ -D"TMS Async32" -aa -Tpp -x -Gn -Gl -Gi -v # --------------------------------------------------------------------------- ALLOBJ = c0pkg32.obj Memmgr.Lib $(PACKAGES) sysinit.obj $(OBJFILES) ALLRES = $(RESFILES) ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mti.lib # --------------------------------------------------------------------------- !ifdef IDEOPTIONS [Version Info] IncludeVerInfo=0 AutoIncBuild=0 MajorVer=1 MinorVer=0 Release=0 Build=0 Debug=0 PreRelease=0 Special=0 Private=0 DLL=0 Locale=1043 CodePage=1252 [Version Info Keys] CompanyName= FileDescription= FileVersion=1.0.0.0 InternalName= LegalCopyright= LegalTrademarks= OriginalFilename= ProductName= ProductVersion=1.0.0.0 Comments= [HistoryLists\hlIncludePath] Count=1 Item0=$(BCB)\include;$(BCB)\include\vcl [HistoryLists\hlLibraryPath] Count=1 Item0=$(BCB)\Projects\Lib;$(BCB)\lib\obj;$(BCB)\li b [HistoryLists\hlDebugSourcePath] Count=1 Item0=$(BCB)\source\vcl [Debugging] DebugSourceDirs=$(BCB)\source\vcl [Parameters] RunParams= HostApplication= RemoteHost= RemotePath= RemoteDebug=0 [Compiler] InMemoryExe=0 ShowInfoMsgs=0 !endif # --------------------------------------------------------------------------- # MAKE SECTION # --------------------------------------------------------------------------- # This section of the project file is not used by the BCB IDE. It is for # the benefit of building from the command-line using the MAKE utility. # --------------------------------------------------------------------------- .autodepend # --------------------------------------------------------------------------- !if !$d(BCC32) BCC32 = bcc32 !endif !if !$d(CPP32) CPP32 = cpp32 !endif !if !$d(DCC32) DCC32 = dcc32 !endif !if !$d(TASM32) TASM32 = tasm32 !endif !if !$d(LINKER) LINKER = ilink32 !endif !if !$d(BRCC32) BRCC32 = brcc32 !endif # --------------------------------------------------------------------------- !if $d(PATHCPP) .PATH.CPP = $(PATHCPP) .PATH.C = $(PATHCPP) !endif !if $d(PATHPAS) .PATH.PAS = $(PATHPAS) !endif !if $d(PATHASM) .PATH.ASM = $(PATHASM) !endif !if $d(PATHRC) .PATH.RC = $(PATHRC) !endif # --------------------------------------------------------------------------- $(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE) $(BCB)\BIN\$(LINKER) @&&! $(LFLAGS) + $(ALLOBJ), + $(PROJECT),, + $(ALLLIB), + $(DEFFILE), + $(ALLRES) ! # --------------------------------------------------------------------------- .pas.hpp: $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< } .pas.obj: $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< } .cpp.obj: $(BCB)\BIN\$(BCC32) $(CFLAG1) -n$(@D) {$< } .c.obj: $(BCB)\BIN\$(BCC32) $(CFLAG1) -n$(@D) {$< } .c.i: $(BCB)\BIN\$(CPP32) $(CFLAG1) -n. {$< } .cpp.i: $(BCB)\BIN\$(CPP32) $(CFLAG1) -n. {$< } .asm.obj: $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@ .rc.res: $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $< # ---------------------------------------------------------------------------
    bonjour fox62 peut etre tu as mal compris c'est pour le seca néerlandais ce soft, et je vois pas pourquoi grizou s'amuserais a balancer n'importe quoi d'antant plus que c'est lui qui a proposer pour comprendre comment fonctionne le seca néerlandais bref je pense que c'est un malentendue.

  6. #6
    VIP Member Grizou0's Avatar
    Join Date
    27-03-2005
    Posts
    558
    Uploads
    37

    Re: Vacommb4.bpl......

    Quote Originally Posted by samkooke View Post
    bonjour fox62 peut etre tu as mal compris c'est pour le seca néerlandais ce soft, et je vois pas pourquoi grizou s'amuserais a balancer n'importe quoi d'antant plus que c'est lui qui a proposer pour comprendre comment fonctionne le seca néerlandais bref je pense que c'est un malentendue.
    Il n'a mal compris, ce gamin poste la même chose sur d'autre forum.
    Juste pour montrer qu'il sait clicker sur un bouton pour décompiler.
    Enfin, faut de tous pour faire un monde.
    Le Vacomm4 est dans la rubrique mosc.
    Bon amusement

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •