Results 1 to 1 of 1

Thread: VuCC VU+ Control Centre Version 0.3

  1. #1
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    VuCC VU+ Control Centre Version 0.3

    vucc031.jpg

    vucc032.jpg

    vucc033.jpg


    VU+ Control Centre Version 0.3 Beta by Lee Hudson - Goldwafers.com
    ------------------------------------------------------------------------------

    Installation Instructions
    -------------------------
    Unzip all the files and folders in the zip file to your local hard drive.


    How to Use VUCC
    --------------------
    1. Run the VUCC.exe application.
    2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
    If your using a private local IP address enter the IP like this: 010.000.000.001
    3. If you have changed the password on your receiver, enter the password in the password field
    otherwise leave blank.
    4. Click Connect Button


    Telnet
    -------
    Self explanatory.
    For a list of Busybox commands check out the following website:
    Code:
    http://www.busybox.net/downloads/BusyBox.html

    FTP
    ---
    Click the FTP Button.
    This will load FileZilla FTP Client and automatically connect to your Vu+
    For instructions on using FileZilla check out the following website:
    Code:
    http://wiki.filezilla-project.org/Using

    Settings Backup
    ------------------
    Click on Settings Backup Button.
    Click the Backup Settings Button.
    This will backup all the channel & satellite settings from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
    The /enigma2 and /tuxbox folders will be located in the same folder as this program.

    Click the Restore Vu+ Settings Button.
    All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
    Once the files have successfully been restored you'll need to reboot the receiver by powering off
    and on using the switch on the back of the receiver.


    Media Files Manager
    -------------------
    Uploading a Media File:
    Select the Hard Drive and folder that contains your Media File.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Local file you want to upload so it's highlighted in blue.
    Click the Upload Button to transfer the file from your local HDD to the Vu+.

    Downloading a Media File:
    Select the Hard Drive and folder that you wish the file to be transferred too.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Remote file you want to download so it's highlighted in blue.
    Click the Download Button to transfer the file from the Vu+ to your local HDD.

    Deleting Local File:
    Select Local file so it's highlighted in blue.
    Click Delete Local File Button.

    Deleting Remote File:
    Select remote file so it's highlighted in blue.
    Click Delete Remote File Button.


    Vu+ HDD Manager
    ---------------
    To mount and format a Hard Disk Drive do the following:
    Select the receiver type and Hard Disk type.
    Click the Format Button.

    This will erase all the data on the Vu+ HDD.

    Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
    You'll see a command prompt like the one below when the format has completed.

    root@bm750>


    Vu+ WebControl
    --------------
    Click the Vu+ WebControl Button to open Vu+ WebControl in your default web browser.


    Upload Channel List
    -------------------
    Select the local directory where the Channel List is sorted.
    Double click the folder to list the files.
    Click the "Upload Channel List" Button.
    When you see the "Channel List Uploaded! Reboot Vu+" message box appear click OK.
    Now Reboot Vu+ by powering off and on.

    IPK Installer
    -------------
    Click the "..." Button to select the local directory where the "ipk" file is located.
    Now click the "Upload and Install IPK File" Button.
    The selected "ipk" file will be transferred to the /tmp folder then installed.
    Details of the installation will be viewable in the terminal window.



    Version History:
    ----------------
    Version 0.3 Released 11-7-2011

    Added IPK Installer.
    Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window.


    Version 0.2 Released 30-9-2010

    Fixed Progressbar issue in Media Files Manager.
    Added Channel List Uploader.
    Added Auto save login details when application is closed.
    Added User definable ports for FTP, Telnet, WebPanel.
    Note: Leave the default ports as they are unless you've altered the default ports on Vu+.


    Version 0.1 Released 16-9-2010
    First Public Beta Release.

    Known Bug:
    Media Files Manager.

    Transferring MKV files over 2GB causes the Progress Bar to become inaccurate.
    Don't worry if the progress bar gets to 100% goes blank and the "Please wait file message"
    still appears.
    Just leave the app running as it's still transferring the file. Once the file has completed
    transferring you'll see the filename appear in the Remote or Local file list window respectively.
    It can take a while to complete if your uploading or downloading a very large MKV file.


    Kind Regards

    Lee.
    Goldwafers.com

    To keep informed on new developments follow us on Twitter and Youtube:
    Code:
    http://twitter.com/goldwafers
    Code:
    http://www.youtube.com/user/goldwafers
    Attached Files Attached Files

Similar Threads

  1. IP Security Camera control centre for Enigma2
    By aguda in forum Vu+ Plugins
    Replies: 2
    Last Post: 18-11-2015, 17:33:31
  2. Vali-XD-Skin-Control Vu+Version
    By aguda in forum Vu+ Picons and Skins
    Replies: 1
    Last Post: 05-01-2011, 02:25:54
  3. Replies: 1
    Last Post: 20-12-2010, 13:01:56
  4. VU+ Control Centre Version 0.1 Beta
    By wahid in forum Vu+ Software and Tools
    Replies: 0
    Last Post: 16-09-2010, 17:46:28
  5. New DCC Dreambox Control Centre
    By lolazoca in forum Dreambox Software and Tools
    Replies: 2
    Last Post: 02-04-2010, 04:34:47

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •