Page 1 of 6 123 ... LastLast
Results 1 to 10 of 51

Thread: Backup Image for Vuo+Uno

  1. #1
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Backup Image for Vuo+Uno

    Vu + UNO-VTi Team Image - V 3.0 21.07.2011 Kayacan * Private Backup
    .
    Backup backup hazırlandı.Alınan by me this day to re-test the device, installed, tested, and then extend out to you.
    .
    4 satellites are fully up to date Backupta my own settings.
    TURKSAT
    HOTBIRD
    EutelsatW3
    ASTRA19.2
    .
    Turksat and its satellites Eutelsat Backupta Picon s installed.
    .
    Backupta CCcam-221, was 213 Mgcamd 1.35a and Oscam0.99 + CCcam.
    .
    Skin Backupta V2.94 was used as a HD Glass 16.
    .
    Backupa added a new driver. (Vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715)
    .
    I need all the plugins that add-ins installed.
    .
    Red + Green + Red + Long Long Long Green + Yellow + Yellow + Blue + Long Blue keys for easy access to some of the menus and various functions installed.
    .
    VU + UNO is a new device, developed and refreshed for the first time as a result of backupunu veriyorum.Yorumlarınız attempt to give the best backups.
    .
    Use the friends good-bye.
    .
    NOTE: VU + UNO 3 days of each image by me trying out a device that tests successfully geçmiştir.Oldukça fast.[/CODE]








    DOWNLOAD

  2. #2
    VIP Member
    Join Date
    12-02-2011
    Location
    «•»Albania«•»
    Posts
    4,395
    Uploads
    3,139

    Re: Backup Image for Vuo+Uno

    BlackHole Vu + UNO Backup 1.6.4 Full HDMI-CEC @ isayuksel

    Code:
    BlackHole Vu + UNO Backup 1.6.4 Full HDMI-CEC @ isayuksel First, download the latest version of the new image to usb installing cihazımıza: Vu + Uno how the image is discarded from USB? (Contacts) Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings Quote: Seçilidi HDMI. 1080i is selected. Turkish language was chosen. DHCP on the network. Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings. To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create We check our config for the network. Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed. Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.) If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is Channel settings before installing the Menu => Setup => System => Customize section of the user experience will change as a specialist. Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book). Quote: VU + Plus in the current channel setting on the HDTV Channel Setting loaded. (July 28, 2011) @ galaxy2002 Be sure to reboot after installing the device to the channel settings. Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration. Quote: Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 ° Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 ° Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken. Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons you can mark (or remove). Quote: Add-on manager; PermanentClock under the System category (not active), Setpasswd under the System category (the password is assigned), StartUpService under the System category (Channel D), VlcPlayer under the Software category, SimpleRSS under the Multimedia category (not active), VirtualZap under the category of multi-media (press and hold the arrow), Plugin Weatheer under the Multimedia category, YouTubePlayer established under the Multimedia category Image management under the category has been removed VideoTune Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting. Also in line with our desire to make a simple config for: Quote: Menu> Setup> System> Audio / Video settings 4:3 content is as follows: Just Scale > 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge. Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk After setting up the Green Key (OK) and acknowledge. Menu> Setup> System> Customize section, change the user experience as an expert in the Green Key (OK) to acknowledge. Initial channel identification: Quote: Channel List, while the point of the channel you want to begin the startup. Press the Menu key. The drop-down set of options, press the OK button on your remote control by pointing to service as stratup. When you restart your device to open the channel you want. If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel; While the Channel List, press the Menu key. Service options in the drop-down option on startup, reset, press the OK button on your remote control to come. Quote: set as the startup service: Channel D When you want to set up as external plugins. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow, then the drop-down menu, press the "Manual Install Ipk packges" on your remote control by pointing to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install. Quote: enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded. Quote: enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and Quote: Nstreamplayer plugin was 0.3. Quote: WebMedia plugin was downloaded. Quote: Zap was founded in pips. Quote: EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline Quote: tunisiasat manager_3.0 download-addons-founded. After restarting our device; Quote: Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.1 b), then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c Quote: AppleTrailer, Sherlock was founded ... Quote: Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do. To set up Hacksat telnette Code: Export MALLOC_CHECK_ = 0 ipkg install-force-overwrite / tmp / Hacksat * give the command. If the installation fails again, try to give the following command: Code: ipkg update Emu are doing the installation of: E2_CCcam_2.2.1_bh download file such as / tmp folder, send out the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do. Making settings for the installation and Bulsat mgcamd: 1) E2_Mgcamd_135a_bh download file (the file will not open), as in the / tmp folder, send the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do. 2) Patched by mgcamd_1.35a Bulsatcom pinkyto0o Enigma2 zipten çıkarıyoruz download file. Zipten extracted in the folder mgcamd_1.35a file via ftp / usr / bin under the taking. (Overwrite the existing file we print) the value of the file chmod 755 do. 3) add-ins come with the green key. Hacksat-k e y-Downloader plug-in point, the key Emuler Update> Mgcamd-key update to download CCcam Kéylerini do. 4) Black Hole Blue Panel also kumandamızın blue key left / right arrow keys to find the Mgcamd-1.35a. Kumandamızın We press the OK button. Mgcamd-1.35a is activated by pressing the OK kumandamızın even necessarily need to rerun. CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter. Server to enter a look at the following post: CCcam.cfg enter a file server If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Manager Addons> Addons Download Manager> Black Hole E2 Image Skins section can come in different skins. I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo: Vu + bootlogo replacement program and the use of ... Quote: Bootlogo and radio fund changed, @ avansis, @ isayuksel If you want to install picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, ndirdiğiniz zipten remove the folder / usr/share/enigma2 / directory should be submitted u

  3. #3
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Backup Image for Vuo+Uno

    VTi - V 3.0 Vu UNO Backup image @isayuksel

    Code:
    Neues VTi "Vu + Team Image" - V 3.0 Backup image Vu UNO @ isayuksel
    
    First, download the latest version of the new image to usb installing cihazımıza: Vu + Uno how the image is discarded from USB? (Contacts)
    
    Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
    
    Quote:
    
    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    DHCP on the network.
    
    Can I search for channels or channel list at this point we can install ready.
    
    (4) Vu + Duo-channel search and bookmark create
    
    4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    VU + Plus in the current channel setting on the HDTV Channel Setting loaded. (July 28, 2011) @ galaxy2002
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Quote:
    
    Vu + UNO with the shape described in the Upgrade Firmware upgrade was Firmwire.
    
    
    Menu => Add-ons section of the press to come Kumandamızın Green (Download Plug-ins) is pressed. "Plug-in information is being downloaded. Please wait ..." You will receive a message that says. On the screen after a period of "downloadable add-ons" will be listed in the categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. "..... When you want to download any attachment plug-in? " A warning will come in the form of knowledge. Here, a "yes" but when selected kumandamızın "OK" button to download and installation can add. [/ B]
    
    Quote:
    
    Downloadable add-ons => systemplugins under the "Blindscan" was established.
    Downloadable add-ons => systemplugins under the "positionersetup" was established.
    Downloadable add-ons => systemplugins under the "Satfinder" was established.
    Downloadable add-ons => systemplugins under the "setpsswd" was established. (The password is assigned)
    Downloadable add-ons => systemplugins under the "startupservice" was established.
    Downloadable add-ons => extensions under the "appletrailer" founded
    Downloadable add-ons => extensions under the "bitrateviewer" founded
    Downloadable add-ons => extensions under the "cccaminfo" was established.
    Downloadable add-ons => extensions under the "mediaplayerextended" was established.
    Downloadable add-ons => systemplugins under the "MyTube" was established.
    Downloadable add-ons => extensions under the "permanentclock" was established.
    Downloadable add-ons => extensions under the "sherlock-vuplus" was established.
    Downloadable add-ons => extensions under the "simplerss" was established. Is not active.
    Downloadable add-ons => extensions under the "virtualzap" was established.
    Downloadable add-ons => extensions under the "vlcplayer" was established.
    Downloadable add-ons => extensions under the "weatherplugin" was established.
    Downloadable add-ons => extensions under the "youtubeplayer" founded
    Downloadable add-ons => cccam2.2.1 was established under the cams.
    Downloadable add-ons => cccam2.1.3oscam0.99.4 was established under the cams.
    Downloadable add-ons => mgcamd1.35 was established under the cams.
    Downloadable add-ons => CCcam config was founded under.
    Downloadable add-ons => config was established under the cccam.oscam.
    Downloadable add-ons => config was established under the mgcamd.
    
    I suggest you to restart your device after installing the plug-ins.
    
    Initial channel identification:
    
    Quote:
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down set of options, press the OK button on your remote control by pointing to service as stratup.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
    
    
    Quote:
    
    Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Note: CCcam.cfg file path in / etc dir. Here editleyebilirsiniz information about the server.
    
    Mgcamd 1.35a installation:
    e2-mipsel-mgcamd_1.35a_100126.tar.gz inidirip ftp file sending tmp folder. VTI device from the panel (blue button-short) manual Installer => "install.tar.gz with" from scratch.
    
    Quote:
    
    CCcam 2.2.1 Installed | Installed Mgcamd 1.3.5a | Bulsat Patch File is loaded.
    Bulsat Patch File Download:
    Bulsatcom mgcamd_1.35a download Patched by pinkyto0o Enigma2 çıkarıyoruz zipten. Zipten extracted in the folder
    mgcamd_1.35a file via ftp / usr / bin under the taking.
    do chmod 755 value.
    
    When you want to set up as external plugins. Ipk file via ftp / tmp directory after a workout, press the blue drop-down menu on your remote control, point the installer manually. Press the OK button on your remote control, it can come on the Install option ipkg.
    
    Quote:
    
    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
    
    Quote:
    
    enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and
    
    Quote:
    
    Nstreamplayer plugin was 0.3.
    
    Quote:
    
    WebMedia plugin was downloaded.
    
    Quote:
    
    EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) ... Was the subject of using the EPG Exporter plugin (v3.0) @ exenonline
    
    Quote:
    
    EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
    
    Quote:
    
    EPG Current / Next Fix plugin was established. (V3.0) @ exenonline
    
    Quote:
    
    tunisiasat manager_3.0 download-addons-founded.
    
    After restarting our device;
    
    Quote:
    
    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.1 b), then the plugins tunisiasat "Netradioturk_2.6-b" was
    
    
    Quote:
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    
    
    You can try different skins as you wish: VU + Duo Twin Linux HDTV Skin Archive






    DOWNLOAD

  4. #4
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Backup Image for Vuo+Uno

    Code:
    VIX Vu + Uno Team Image Image Backup v2.2.100 @ isayuksel
    
    First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is
    
    Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
    
    Quote:
    
    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    DHCP on the network.
    
    Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.
    
    This theme for this review: (4) Vu + Duo-channel search and bookmark create
    
    We check our config for the network.
    
    Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
    
    4 different methods to throw the Channel List (Contacts).
    
    
    Be sure to reboot after installing the device to the channel settings.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
    
    
    Menu => Accessories => Green Button (Download Extension) a is pressed.
    Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.
    
    Quote:
    
    Downloadable add-ons => systemplugins Autoresolution below,
    Downloadable add-ons => systemplugins fpgaupgrade below,
    Downloadable add-ons => systemplugins setpasswd below,
    Downloadable add-ons => appletrailer under extensions,
    Downloadable add-ons => MyTube under extensions,
    Downloadable add-ons => permanentclock under extensions,
    Downloadable add-ons => pipzap under extensions,
    Downloadable add-ons => extensions under the Sherlock-vuplus (5.01),
    Downloadable add-ons => simplerss under extensions,
    Downloadable add-ons => virtualzap under extensions,
    Downloadable add-ons => vlcplayer under extensions,
    Downloadable add-ons => weatherplugin under extensions,
    Downloadable add-ons => youtubeplayer established under extensions.
    
    Emu are doing the installation of:
    
    wixcam.rar file included in the download folder "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" file via ftp device of the / tmp folder, send out the bottom. Menu> Setup> VIX> Offline add-in download section to come, "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" We see the file. Kumandamızın the OK button (or pressing the green button kumandamızdaki) by pressing the yes on that question while we do the installation by pressing the OK button kumandamızın. We acknowledge again başlatmayıda.
    
    Enigma2-plugin-cams in the same way, the do-mgcamd.1.35a_1.0-r3_mipsel.ipk installation.
    
    mg_cfg file / usr / send keys under.
    
    CCcam.cfg file / etc folder is located. This file server uses the knowledge should not to enter.
    
    Quote:
    
    CCcam 2.2.1 Installed | Installed Mgcamd 1.3.5a | Bulsat Patch File is loaded.
    Bulsat Patch File Download:
    Bulsatcom mgcamd_1.35a download Patched by pinkyto0o Enigma2 çıkarıyoruz zipten. Zipten extracted in the folder
    mgcamd_1.35a file via ftp / usr / softcams under the taking.
    do chmod 755 value.
    
    Quote:
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    
    When you want to set up as external plugins. Ipk file via ftp / tmp directory after a workout
    Menu> Setup> VIX> IPK installer to come and we want to set up even though the file was selected Kumandamızın after seeing the OK button (or pressing the green button kumandamızdaki) by pressing the yes on that question while we do the installation by pressing the OK button kumandamızın.
    
    
    Quote:
    
    enigma2-plugin-extensions-pauli_7.1_all.ipk file was downloaded. Set up the way we know the control keys.
    
    Quote:
    
    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
    
    Quote:
    
    enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and
    
    Quote:
    
    WebMedia plugin was downloaded.
    
    Quote:
    
    tunisiasat manager_3.0 download-addons-founded.
    
    After restarting our device;
    
    Quote:
    
    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.1 b), then the plugins tunisiasat "Netradioturk_2.6-b" was
    
    Quote:
    
    Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set up, started service: Channel D






    DOWNLOAD USB

  5. #5
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Backup Image for Vuo+Uno

    Official 5.11 Vu Uno Image Backup @isayuksel

    Code:
      Code:
    
        Official Wu Uno Image Backup 5.11 @ isayuksel
    
        Installation and initial settings::
    
        First, download the latest version of the new image to usb installing cihazımıza: Vu + Uno how the image is discarded from USB? (Contacts)
    
        After the setup wizard after installing the software is encountered. At this stage I'm only language choice. Other transactions without getting out of the wizard.
        Quote:
    
    
    
        Turkish language was chosen.
    
        We check our config for the network.
    
        Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
        User Interface: yes
        Use DHCP: yes
    
        We take note of the IP address of your current settings section.
    
        If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
    
        Channel List in order to install I need to do some adjustments.
    
        Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
        (Menu => System => Customize section) Enable the use of multi-bouquet "yes" as a change. Kumandamızın green button to save the changes (OK) is pressed.
    
        Again, the channel setting, install, and we can do with the computer for other tasks "Webinterface" needs to create plug-in.
    
        For this
        Menu => Accessories => Green Button (Download Extension) a is pressed.
        Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.
    
        Here, under the extensions section "Webinterface" plug-in came on the OK button is pressed kumandamızın. "Extensions-Webinterface" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.
    
        "Practice is over the text" key to exit kumandamızın are going to see.
    
    
    
        Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).
    
    
        Quote:
    
    
    
        VU + Setting (Ready-Channel Lists) Kayacan * loaded in the current setting. (8 Satellite-07.31.2011)
    
        Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
        Quote:
    
    
    
        Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    
        Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
    
        Extension (plugins) are doing the installation of:
    
        We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plug-in from scratch.
        Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.
    
        "Practice is over the text" key to exit kumandamızın are going to see.
    
        Us to establish this, more add-ons management (more options and removing add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.
    
        Quote:
    
    
    
        İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.
    
    
        Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will be first noticed Changeable. Add-up and drop-down menu and we will remove the red key now.
    
    
        Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons you can mark (or remove).
    
        We are under the System category, "StartUpService" i, under the direction of the image "videmode" plug-ins are choosing. With red button (back), she next to the red button (Close) are going. "Add-on Management activity information" window, choose Add-In (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.
    
    
    
        When we started re-opening the connection with the reason we set up our device videomode plugin settings will be related to the shape and resolution.
    
        Quote:
    
    
    
        DVI is selected.
        1080i was chosen
    
        Image configuration.
    
        Quote:
    
    
    
        Menu> Setup> System> Audio / Video settings section to come
        4:3 content is as follows: Just Scale
        > 16:9 content is as follows: Just Scale
        changed. Green Key (OK) were recorded with the changes.
    
    
        Quote:
    
    
    
        CommonInterfaceAssigment under the System category,
        Hotplug system under the category,
        PermanentClock under the System category,
        PositionerSetup under the System category,
        Satfinder under the System category,
        Setpasswd under the System category,
        TempFanControl under the System category,
        WirelessLanSetup under the System category,
        VideoEnckancment under the System category,
        VlcPlayer under the Software category,
        Autoresolution under the Multimedia category,
        EasyMedia under the Multimedia category,
        MyTube under the Multimedia category,
        SimpleRSS under the Multimedia category,
        VirtualZap under the Multimedia category,
        WeatherPlugin under the Multimedia category,
        YouTubePlayer established under the Multimedia category
    
    
    
    
        Quote:
    
    
    
        Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
        set as the startup service: Channel D
    
        When you want to set up as external plugins. Ipk file via ftp / tmp directory, take, then give the following telnet command to restart the device, and finally enough.
    
        Code:
    
        ipkg install / tmp / *. ipk
    
        Quote:
    
    
    
        DreamExplorer was 7.3.
    
        Quote:
    
    
    
        Was MediaPlayerExtended
    
        Quote:
    
    
    
        Sherlock was 5.0.
    
        Quote:
    
    
    
        Webmedia was 3.0.
    
        Quote:
    
    
    
        enigma2-skin-hdglass16_3.17_mipsel.ipk interface was downloaded.
    
        Quote:
    
    
    
        enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and
    
        Quote:
    
    
    
        Nstreamplayer plugin was 0.3.
    
        Quote:
    
    
    
        EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) ... Was the subject of using the EPG Exporter plugin (v3.0) @ exenonline
    
        Quote:
    
    
    
        EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
    
        Quote:
    
    
    
        EPG Current / Next Fix plugin was established. (V3.0) @ exenonline
    
        Quote:
    
    
    
        New! Biss Biss CCcam Plugins CCcam located in ivez's was founded plugin (@ veyselcan)
    
        Quote:
    
    
    
        tunisiasat manager_3.0 download-addons-founded.
    
        After restarting our device;
    
        Quote:
    
    
    
        Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.2b) and 3.5 TSpanel tunisiasat plugins then the "Netradioturk_2.6-b" and finally under the CCcam Info plugin and Glass_System_Utilty_V3 V1.3c was .75 b
    
        After restarting our device;
    
        Quote:
    
    
    
        Menu> TS Panel> Emu Manager to come and blue buttons (Load) was founded with the cccamd-2.2.1.
    
        Note: The panel is made of the TS Emu installation easier. In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.
    
        Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in download and build it as described above. Must have on your hdd for this extension to work. During the installation, the folders are hdd. This is caused by ftp to the / tmp directory, after sending the telnette ipkg install / tmp / *. ipk to be established by executing the command.
    
        Kurulumlarımızı our config and do the other.
    
        If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Manager Addons> Addons Download Manager> Black Hole E2 Image Skins section can come in different skins.
    
        I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:
    
        Vu + bootlogo replacement program, use, ready bootlogolar ...
    
        Quote:
    
    
    
        Bootlogo and radio fund changed, @ avansis, @ isayuksel
    
        If you want to install picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder zipten remove / usr/share/enigma2 / directory should be submitted under. There is no Backupta.


    DOWNLOAD USB >> Download <<

  6. #6
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Backup Image for Vuo+Uno

    Code:
    Neues VTi "Vu + Team Image" - V 3.1 Backup image of the UNO Vu @ isayuksel
    
    First, download the latest version of the new image to usb installing cihazımıza: Vu + Uno how the image is discarded from USB? (Contacts)
    
    Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
    
    Quote:
    
    
    
    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    DHCP on the network.
    
    Can I search for channels or channel list at this point we can install ready.
    
    (4) Vu + Duo-channel search and bookmark create
    
    4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    
    
    VU + Plus in the current channel setting on the HDTV Channel Setting loaded. (July 28, 2011) @ galaxy2002
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    
    
    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Quote:
    
    
    
    Vu + UNO with the shape described in the Upgrade Firmware upgrade was Firmwire.
    
    
    Menu => Add-ons section of the press to come Kumandamızın Green (Download Plug-ins) is pressed. "Plug-in information is being downloaded. Please wait ..." You will receive a message that says. On the screen after a period of "downloadable add-ons" will be listed in the categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. "..... When you want to download any attachment plug-in? " A warning will come in the form of knowledge. Here, a "yes" but when selected kumandamızın "OK" button to download and installation can add. [/ B]
    
    Quote:
    
    
    
    Downloadable add-ons => systemplugins under the "Blindscan" was established.
    Downloadable add-ons => systemplugins under the "positionersetup" was established.
    Downloadable add-ons => systemplugins under the "Satfinder" was established.
    Downloadable add-ons => systemplugins under the "setpsswd" was established. (The password is assigned)
    Downloadable add-ons => systemplugins under the "startupservice" was established.
    Downloadable add-ons => extensions under the "appletrailer" founded
    Downloadable add-ons => extensions under the "bitrateviewer" founded
    Downloadable add-ons => extensions under the "cccaminfo" was established.
    Downloadable add-ons => extensions under the "mediaplayerextended" was established.
    Downloadable add-ons => systemplugins under the "MyTube" was established.
    Downloadable add-ons => extensions under the "permanentclock" was established.
    Downloadable add-ons => extensions under the "sherlock-vuplus" was established.
    Downloadable add-ons => extensions under the "simplerss" was established. Is not active.
    Downloadable add-ons => extensions under the "virtualzap" was established.
    Downloadable add-ons => extensions under the "vlcplayer" was established.
    Downloadable add-ons => extensions under the "weatherplugin" was established.
    Downloadable add-ons => extensions under the "youtubeplayer" founded
    Downloadable add-ons => cccam2.2.1 was established under the cams.
    Downloadable add-ons => cccam2.1.3oscam0.99.4 was established under the cams.
    Downloadable add-ons => mgcamd1.35 was established under the cams.
    Downloadable add-ons => CCcam config was founded under.
    Downloadable add-ons => config was established under the cccam.oscam.
    Downloadable add-ons => config was established under the mgcamd.
    
    I suggest you to restart your device after installing the plug-ins.
    
    Initial channel identification:
    
    Quote:
    
    
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down set of options, press the OK button on your remote control by pointing to service as stratup.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
    
    
    Quote:
    
    
    
    Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Note: CCcam.cfg file path in / etc dir. Here editleyebilirsiniz information about the server.
    
    1:36 mgcamd setup:
    
    File in the download file via ftp mgcamd_1.36 Mgcamd 1:36 / usr / bin folder permissions to send and make 755, then mgcamd_1.36_cam.sh file via ftp / usr / scripts folder permissions to send and we do 755.
    
    
    When you want to set up as external plugins. Ipk file via ftp / tmp directory after a workout, press the blue drop-down menu on your remote control, point the installer manually. Press the OK button on your remote control, it can come on the Install option ipkg.
    
    Quote:
    
    
    
    Was MediaPlayerExtended
    
    Quote:
    
    
    
    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and
    
    Quote:
    
    
    
    Nstreamplayer plugin was 0.3.
    
    Quote:
    
    
    
    WebMedia3.0 plugin was downloaded.
    
    
    Quote:
    
    
    
    EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) ... Was the subject of using the EPG Exporter plugin (v3.0) @ exenonline
    
    Quote:
    
    
    
    EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
    
    Quote:
    
    
    
    EPG Current / Next Fix plugin was established. (V3.0) @ exenonline
    
    
    Quote:
    
    
    
    tunisiasat manager_3.0 download-addons-founded.
    
    After restarting our device;
    
    Quote:
    
    
    
    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.2 b), then the plugins tunisiasat "Netradioturk_2.6-b" was
    
    
    Quote:
    
    
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.






    DOWNLOAD NFI

    DOWNLOAD USB

  7. #7
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    AAF Enigma2 Summer V2 Image Vu Uno backup @isayuksel

    Code:
    Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category.
    
    Quote:
    
    
    
    
    
    Downloadable add-ons => systemplugins under the "setpasswd",
    Downloadable add-ons => systemplugins under the "softwaremanager",
    Downloadable add-ons => systemplugins under the "startupservice",
    Downloadable add-ons => extensions under the "MyTube",
    Downloadable add-ons => extensions under the "permanentclock",
    Downloadable add-ons => extensions under the "simplerss",
    Downloadable add-ons => extensions under the "virtualzap",
    Downloadable add-ons => extensions under the "vlcplayer",
    Downloadable add-ons => extensions under the "weatherplugin",
    Downloadable add-ons => extensions under the "youtubeplayer",
    Downloadable add-ons => emus under the "vuplus-CCcam-2.2.1",
    Downloadable add-ons => emus under the "vuplus-cccam-config" is established.
    
    CCcam.cfg file / usr / keys are. Here you can edit the server by entering your information.
    
    Quote:
    
    
    
    Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Downloadable add-ons Other add-ons that are not blue iiçin kumandamızın key is pressed.
    Addon-Manager, point to the drop-down menu kumandamızın We press the OK button.
    Download Manager drop-down menu on the OK button is pressed while the kumandamızın.
    
    Here, we want to do the installation of plugins.
    
    Quote:
    
    
    
    
    CCcaminfo,
    Enchancechmoviecenter_2.0.2,
    Mediaplayerextended 0.1.3,
    Sherlock_5.01 (help press) was established.
    
    Appletrailer_0.1 download and build it in the same menu, there is backupda. Needs to be installed on your device.
    
    When you want to set up as external plugins. Ipk file via ftp / tmp directory after a workout Addon-Manager, at (Addon_managere kumandamızın blue button is pressed to achieve. Addon-Manager, point to the drop-down menu kumandamızın We press the OK button.) Install from / tmp point to the OK button kumandamızın is pressed. Green drop-down menu key (IPK-Files) is pressed. / Tmp folder where the files can see that we took. We press the OK button, point kumandamızın.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
    
    Quote:
    
    
    
    WebMedia3.0 plugin was downloaded.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and
    
    Quote:
    
    
    
    Nstreamplayer plugin was 0.3.
    
    
    Quote:
    
    
    
    EPG Current / Next Fix plugin was established. (V3.0) @ exenonline
    
    Quote:
    
    
    
    tunisiasat manager_3.0 download-addons-founded.
    
    After restarting our device;
    
    Quote:
    
    
    
    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.2 b), then the plugins tunisiasat "Netradioturk_2.6-b" was
    
    Quote:
    
    
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    
    
    I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:
    
    Vu + bootlogo replacement program and the use of ...
    
    Quote:
    
    
    
    Bootlogo and radio fund changed, @ avansis

    di-6ZPJ.jpg
    di-OG7C.jpg
    di-QKAW.jpg
    di-W5T0.jpg

    >>>Download<<<

  8. #8
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Backup Image for Vuo+Uno

    Code:
    Pli image 2.1 (02/09/2011) backup files are examples of privatization, and Uno
    
    First, a new image for the latest version of usb Tuck Official Web Site 'from the downloading and installing cihazımıza: Vu + USB Uno how image will be scored? (Contacts)
    
    Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
    
    
    Quote:
    
    
    
    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    
    
    Can I search for channels or channel list at this point we can install ready.
    
    To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create
    
    Webinterface to install any plug-in need to set the Channel List. For this
    
    Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you find the add-on extensions, while under the category webinterface_old kumandamızın We press the OK button.
    
    To be effective, re-launching the plug-in cihazımızı.
    
    We check our config for the network.
    
    Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install the editor not to enter the value of the rope.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
    
    Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).
    
    Quote:
    
    
    
    VU + Setting (Ready-Channel Lists) Kayacan * loaded in the current setting. (4 Satellite-09.02.2011)
    
    Be sure to reboot after installing the device to the channel settings.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    
    
    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
    
    Quote:
    
    
    
    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed. Green Key (OK) were recorded with the changes.
    
    Quote:
    
    
    
    Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category.
    
    Quote:
    
    
    
    Add-on manager;
    Autoresolution systemplugins under the category,
    commoninterfaceassignment systemplugins under the category,
    under systemplugins Setpasswd (The password is assigned),
    videoenchancement systemplugins under the category,
    bitrateviewer under category extensions,
    cccaminfo under category extensions
    under category extensions dmconcinnty-hd-hardymod
    mediacenter under category extensions,
    permanentcloc under category extensions (not active)
    under category extensions Sherlock (help, press),
    showclock under category extensions (help, press),
    simplerss under category extensions (supply address has been entered),
    subtitleplayer under category extensions (3.05),
    virtualzap under category extensions (arrow key, press and hold)
    vlcplayer under category extensions
    weatherplugin under category extensions
    webmedia under category extensions
    youtubeplayer under category extensions
    2.2.1 under softcams ccam
    dmconcinnty-hd-mod4in1 was founded under the category of skins.
    
    Also;
    apletrailer under the category of extensions to build it.
    
    When you want to set up as external plugins. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
    Code:
    
    opkg install / tmp / *. ipk
    
    Restart your device after installation of the plugin.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
    
    Quote:
    
    
    
    EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
    
    Quote:
    
    
    
    enigma2-plugin-glasssysutil_3.77_mipsel.ipk was downloaded.
    
    Quote:
    
    
    
    tunisiasat manager_3.0 download-addons-founded.
    
    Quote:
    
    
    
    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.2 b), then the plugins tunisiasat "Netradioturk_2.6-b" was
    
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and installation are doing.
    To set up Hacksat telnette
    Code:
    
    Export MALLOC_CHECK_ = 0
    opkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    Our device came after restarting the plugin by running the plug-ins are making k.ey update.
    
    
    CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.
    
    Server to enter a look at the following post:
    
    CCcam.cfg enter a file server
    
    I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:
    
    Vu + bootlogo replacement program and the use of ...
    
    If you want to install picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, ndirdiğiniz zipten remove the folder / usr/share/enigma2 / directory should be submitted under. There is no Backupta.
    
    Prepared for the backup link in accordance with the above description giving Vu + Uno. Who want to download and install and review:












    DOWNLOAD

  9. #9
    Super Moderator aguda's Avatar
    Join Date
    09-12-2007
    Posts
    10,343
    Uploads
    2,875

    Re: Backup Image for Vuo+Uno

    Code:
    BlackHole Vu + UNO 1.6.5 Backup @ isayuksel
    
    Installation and initial settings::
    
    First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is
    
    Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
    
    Quote:
    
    
    
    Seçilidi HDMI.
    1080i is selected.
    Turkish language was chosen.
    DHCP on the network.
    
    Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.
    
    To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create
    
    We check our config for the network.
    
    Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
    
    Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)
    
    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
    
    Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).
    
    Quote:
    
    
    
    VU + Plus in the current channel setting on the HDTV Channel Setting loaded.
    (03 September 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 added to the satellites.)
    @ Galaxy2002
    
    Be sure to reboot after installing the device to the channel settings.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    
    
    Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
    
    Extension (plugins) are doing the installation of:
    
    Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons you can mark (or remove).
    
    Quote:
    
    
    
    Add-on manager;
    PermanentClock under the System category (not active),
    Setpasswd under the System category (the password is assigned),
    StartUpService under the System category (Channel D),
    TempFanControl under the System category (Channel D),
    VlcPlayer under the Software category,
    SimpleRSS under the Multimedia category (not active),
    VirtualZap under the category of multi-media (press and hold the arrow),
    Multi-media category was established under the Weatheer Plugin.
    Image management under the category has been removed VideoTune
    
    Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.
    
    Also in line with our desire to make a simple config for:
    
    Quote:
    
    
    
    Menu> Setup> System> Audio / Video settings
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
    Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    After setting up the Green Key (OK) and acknowledge.
    Menu> Setup> System> Customize section, change the user experience as an expert in the Green Key (OK) to acknowledge.
    
    Initial channel identification:
    
    Quote:
    
    
    
    Channel List, while the point of the channel you want to begin the startup.
    
    Press the Menu key.
    
    The drop-down set of options, press the OK button on your remote control by pointing to service as stratup.
    
    When you restart your device to open the channel you want.
    
    If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel;
    
    While the Channel List, press the Menu key.
    
    Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
    
    Quote:
    
    
    
    
    set as the startup service: Channel D
    
    
    Panel Addons Manager can install some plugins that are not manager plug-in BiH. To do this;
    
    Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row come. Here, while the kumandamızın Addons Download Manager by pressing OK on the pop-up is in Chapter Black Hole Image plugins plug-ins can be loaded by pressing the OK button on the kumandamızın reached. For this too we want to build add-on and then the OK button is pressed while the kumandamızın. Brief explanations about the plugin will display the info. Here, the green key (download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın on the screen, yes, carry out the installation by pressing the OK button.
    
    
    Quote:
    
    
    
    DreamExplorer 7.3, MediaplayerExtanded 0.1.2, 5.0 WebMedia v3.2 was Sherlock.
    
    Mangere as described above can install addons v1.0 Apple Trailer. This extension is not Backupta. Must have on your hdd for this extension to work. During the installation, the folders are hdd. This causes the addons panel or the / tmp directory needs to be established.
    
    When you want to set up as external plugins. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow, then the drop-down menu, press the "Manual Install Ipk packges" on your remote control by pointing to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
    
    Quote:
    
    
    
    EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) ... Was the subject of using the EPG Exporter plugin (v3.0) @ exenonline
    
    Quote:
    
    
    
    EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
    
    Quote:
    
    
    
    EPG Current / Next Fix plugin was established. (V3.0) @ exenonline
    
    Quote:
    
    
    
    Nstreamplayer plugin was 0.3.
    
    Quote:
    
    
    
    ShowClock established. Press and hold the exit.
    
    Quote:
    
    
    
    enigma2-plugin-extensions-subtitleplayer_3.07-r2_mipsel.ipk was downloaded.
    
    Quote:
    
    
    
    tunisiasat manager_3.0 download-addons-founded.
    
    After restarting our device;
    
    Quote:
    
    
    
    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.2 b), then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c
    
    Emu are doing the installation of:
    
    E2_CCcam_2.2.1_bh download file such as / tmp folder, send out the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.
    
    CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.
    
    CCcam.cfg enter a file server
    
    Mgcamd_1.37_E2_bh.tgz download file such as / tmp folder, send out the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.
    
    key establishment and key update installer we also deal with:
    
    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    
    give the command.
    If the installation fails again, try to give the following command:
    Code:
    
    ipkg update
    
    
    Kurulumlarımızı our config and do the other.
    
    If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Manager Addons> Addons Download Manager> Black Hole E2 Image Skins section can come in different skins.
    
    I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:
    
    Vu + bootlogo replacement program, use, ready bootlogolar ...
    
    Quote:
    
    
    
    Bootlogo and radio fund changed, @ avansis, @ isayuksel
    
    
    If you want to install picon file. Turksat-W3 current HD Picon (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory or folder you create called picon into this folder will need to send the file permission after making 755.







    DOWNLOAD

  10. #10
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    Re: Backup Image for Vuo+Uno

    VTi "Vu+Uno Team Image" - V 3.1( backup unofficial image )











    Bismillah Rahman Rahim
    Peace, mercy and blessings of God be upon you

    VTi "Vu+Uno Team Image" - V 3.1


    Albakab has been modified significantly to wish everyone admired
    Leave the judgement to you

    1. develop appropriate Arabization in August and some alblgn Allbäck


    7. Add new Arabization to fully translate the Jinn


    CCCam2.2.1

    MGCamd 1.35a

    >>>Download<<<

Page 1 of 6 123 ... LastLast

Similar Threads

  1. Backup LS-Image - DM7020 HD
    By *Besmiri* in forum Dreambox DM 7020 Images
    Replies: 0
    Last Post: 04-12-2011, 22:36:29
  2. BACKUP iMAGE DM8000 BY SUDOMAN
    By aguda in forum Dreambox DM 8000 HD PVR Images
    Replies: 5
    Last Post: 24-05-2011, 00:18:20
  3. Experimental Backup image from by sudoman
    By aguda in forum Dreambox DM 8000 HD PVR Images
    Replies: 0
    Last Post: 11-05-2011, 00:06:19
  4. New Qbox Hd Image Backup
    By passete in forum Q-Box HD Images
    Replies: 24
    Last Post: 05-05-2011, 23:17:55
  5. Info Warning, firmware and backup image.
    By Tokosu in forum Dreambox
    Replies: 0
    Last Post: 11-08-2009, 01:51:08

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •