Results 1 to 4 of 4

Thread: Help: Converting CAS .bin files to fun6/7 .hex

  1. #1
    New Member
    Join Date
    11-06-2006
    Posts
    1
    Uploads
    0

    Question Help: Converting CAS .bin files to fun6/7 .hex

    Greetings!
    First of all thanks for the overflow of info on this forum!
    i'm even getting bald of so much input!! :D

    i'm wondering if anyone could shed me some light on this issue.
    Is there a way to convert the famous mrb3.12XXX.bin files to funcard .hex.
    The issue is that like many i don't have a CAS 2/3 interface to upgrade the firmware of the MRB. and even my sony vaio doesn't like the UCAS software via pcmcia, so i'm stuck with upgrades via funcards.
    What i want to know is the method i can take the well spreaded CAS .bin files and convert them into 2 or more .hex files for the Fun6 cards that i've got.
    so i can update the MRB. (i've got the CIW converter form zacky, but it always give me the error that the card is invalid, must be some issue when it splits the firmaware to two .hex [1024])

    Also if someone could give me some hint, why do we need to convert the ZCAS MRB into a UCAS?!? isn't the ZCAS better, since it support multiple cryptos?!?
    Thanks in advance and keep up the great job m8s!!

    Sorry for the dumb questions, but i'm still crawling on this subject!
    once again 10x m8s!! a lot!!!!

  2. #2

    Re: Help: Converting CAS .bin files to fun6/7 .hex

    I have the same pb did you get any answer?
    Regards
    JC

  3. #3
    VIP Member
    Join Date
    29-03-2005
    Posts
    5,110
    Uploads
    0

    Re: Help: Converting CAS .bin files to fun6/7 .hex

    Quote Originally Posted by leodr99 View Post
    Greetings!
    First of all thanks for the overflow of info on this forum!
    i'm even getting bald of so much input!! :D

    i'm wondering if anyone could shed me some light on this issue.
    Is there a way to convert the famous mrb3.12XXX.bin files to funcard .hex.
    The issue is that like many i don't have a CAS 2/3 interface to upgrade the firmware of the MRB. and even my sony vaio doesn't like the UCAS software via pcmcia, so i'm stuck with upgrades via funcards.
    What i want to know is the method i can take the well spreaded CAS .bin files and convert them into 2 or more .hex files for the Fun6 cards that i've got.
    so i can update the MRB. (i've got the CIW converter form zacky, but it always give me the error that the card is invalid, must be some issue when it splits the firmaware to two .hex [1024])

    Also if someone could give me some hint, why do we need to convert the ZCAS MRB into a UCAS?!? isn't the ZCAS better, since it support multiple cryptos?!?
    Thanks in advance and keep up the great job m8s!!

    Sorry for the dumb questions, but i'm still crawling on this subject!
    once again 10x m8s!! a lot!!!!
    Hi leodr99, for converting CAS .bin files to fun6/7 .hex my way is:

    Use CIW_MFC_2.0 to convert .bin file in .upd file and then use MRFS to generate .hex files for the funcards you have.

    I hope that your problem will be solved. Enjoy.

    Sorry for my bad english.

  4. #4
    Moderator
    Join Date
    15-09-2005
    Posts
    144
    Uploads
    12

    Re: Help: Converting CAS .bin files to fun6/7 .hex

    Quote Originally Posted by leodr99 View Post
    Greetings!
    First of all thanks for the overflow of info on this forum!
    i'm even getting bald of so much input!! :D

    i'm wondering if anyone could shed me some light on this issue.
    Is there a way to convert the famous mrb3.12XXX.bin files to funcard .hex.
    The issue is that like many i don't have a CAS 2/3 interface to upgrade the firmware of the MRB. and even my sony vaio doesn't like the UCAS software via pcmcia, so i'm stuck with upgrades via funcards.
    What i want to know is the method i can take the well spreaded CAS .bin files and convert them into 2 or more .hex files for the Fun6 cards that i've got.
    so i can update the MRB. (i've got the CIW converter form zacky, but it always give me the error that the card is invalid, must be some issue when it splits the firmaware to two .hex [1024])

    Also if someone could give me some hint, why do we need to convert the ZCAS MRB into a UCAS?!? isn't the ZCAS better, since it support multiple cryptos?!?
    Thanks in advance and keep up the great job m8s!!

    Sorry for the dumb questions, but i'm still crawling on this subject!
    once again 10x m8s!! a lot!!!!
    Hi

    here you can find the converter for fun

    http://www.satsupreme.com/showthread.php?t=23488

    best regards

Similar Threads

  1. Question Emulation of dvb converting
    By alsmirn in forum DVB Emulators
    Replies: 0
    Last Post: 14-06-2009, 11:23:56
  2. Soft pour Fun6
    By gij in forum Viaccess
    Replies: 0
    Last Post: 06-01-2006, 09:09:01
  3. carte fun6
    By versatis in forum French / Français
    Replies: 2
    Last Post: 09-12-2005, 19:07:09
  4. xcrypto 129 Fun6
    By secana in forum X-Cam
    Replies: 0
    Last Post: 19-05-2005, 13:09:39
  5. xcrypt 124 fun6
    By secana in forum X-Cam
    Replies: 0
    Last Post: 02-04-2005, 14:14:40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •