Results 1 to 2 of 2

Thread: [vuuno] MultibootCfe beta V1 experimental

  1. #1
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    [vuuno] MultibootCfe beta V1 experimental

    warning is a beta version it is possible that it is the thing that not work, as bootmenu, and the scrip of repair usb, silk on you can use the rs232 cable in case of crash



    Good evening, here is my first utility, the multiboot-v42b-boot-cfe. In order to use this utility 14 partitions need to be created on a usb ***. The first partition needs to be FAT formatted, the others will be formatted in ext3 with the integrated script or using my partitioning script.

    ? It is compatible with 1016 cylinder USB where the image needs to be stored. ?

    Once formatted properly, the usb *** will auto mount, one only needs to store an image in /media/hdd/image directory. Download the USB version of an image, unzip on the PC and only transfer the root_cfe_auto.jffs2 file with FTP to the /media/hdd/image directory. extraction-*-sdb*.sh.


    Code:
    ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuplus.ipk
    
    warning this version paritionne this package installed then your usb multiboot-cfe
    multiboot-cfe-paritionneur-v1-vuplus.ipk



    Code:
    ipkg install /tmp/dosfstools_3.0.11-r2_mipsel.ipk
    
    for Relocation after the flash flashed Abors installed this package and then installed multiboot-cfe
    dosfstools_3.0.11-r2_mipsel.ipk


    Code:
     
    ipkg install /tmp/multiboot-v*-cfe.ipk
     
    warning this version is a full version based on version 42a, but it jous the new database without erasing your USB key and it does a full install but you have to Abors paritionné with the usb multiboot-cfe -paritionneur-v1-vuplus.ipk if you have never installed this multiboot, it takes between 5 and 15 minutes until the end of the installation






    multiboot-beta -uno-v1-cfe.ipk



    Code:
    Here is the repair kit in case of lock on the boot
    vuplus-répare-env.zip







    waring when you put an image in multiboot, verified that the image is complete, otherwise the demo will remain on the console boot, and must be removed manually or parity approx flach reboot manually with a null modem cable

    news:

    if something goes wrong you need the rs232 cable with version 42b, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made ​​as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo



    Code:
    readme multiboot-cfe beta1 vuuno
    add vtie 3.11 ,plie 3.11,off 3.11,vix 3.11,blackole 3.11












    -----------------------------




    how to install multiboot cfe?

    ----------------------------------

    have a usb of at least 2 gb

    ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuplus.ipk

    ipkg install /tmp/multiboot-v*-cfe.ipk






    rebooted at the end the demo




    how to install an image?

    -----------------------------

    go on the multiboot menu and select cfe jffs2 image retrieval

    but before downloading the image format you want to install usb and

    transfer the file "root_cfe_auto.jffs2" in / media / hdd / image once transferred

    sélélection the image you want to install and wait for extracting approximately

    5 to 15 minute warning to this step goes well it should have 1 internal hard drive to install

    Because of the swap and because we must save the file "root_cfe_auto.jffs2" in / media / hdd / image, noted

    esata that must walk as externally




    how to boot image?

    ---------------------------

    go on the multiboot menu and select cfe boot image and select the image that has been installed,

    attention must be that the image that you booted or installed in good parity, otherwise demo will remain on the starting

    and it will be restarted manually on flach with the RS232 cable, once selected the image that will boot, reboot




    how to get back on flach?

    -----------------------------

    go on the multiboot menu and select cfe return flach flach and back and rebooted the demo




    my demo stuck on starting in on an image bootent usb how to troubleshoot?

    -------------------------------------------------- -------------------------------------------

    do not panic, unplug your demo and removed the USB drive, connected the RS232 cable and connected with hyperterminal

    rekindled the demo and you should see the boot sequence demo and it will stop all alone when she vera not usb

    and will remain on the console of the CFE (bootloader)

    make it simple to troubleshoot as sa

    unsetenv STARTUP

    and rebooted and the demo in Redem flach


    news :

    if something goes wrong you need the rs232 cable with version 38, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made ​​as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo


    Thanks gigi



    Download

  2. #2
    VIP Member fushkrujs's Avatar
    Join Date
    19-06-2009
    Posts
    2,585
    Uploads
    1,070

    Re: [vuuno] MultibootCfe beta V1 experimental

    [vuuno] MultibootCfe beta V2 experimental


    warning is a beta version it is possible that it is the thing that not work, as bootmenu, and the scrip of repair usb, silk on you can use the rs232 cable in case of crash,and you have an internal hard drive to make it work



    Good evening, here is my first utility, the multiboot-v1beta-vuuno-boot-cfe. In order to use this utility 7 partitions need to be created on a usb ***. The first partition needs to be FAT formatted, the others will be formatted in ext3 with the integrated script or using my partitioning script.

    ? It is compatible with 1016 cylinder USB where the image needs to be stored. ?

    Once formatted properly, the usb *** will auto mount, one only needs to store an image in /media/hdd/image directory. Download the USB version of an image, unzip on the PC and only transfer the root_cfe_auto.jffs2 file with FTP to the /media/hdd/image directory. extraction-*-sdb*.sh.

    Code:
    readme multiboot-cfe-paritionneur-v1-vuuno
    add multiboot-cfe-paritionneur-v1-vuuno.ipk Special vuuno, 7 CRE parity are 2GB or 4GB or more
    Code:
    ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuuno.ipk
    
    warning this version paritionne this package installed then your usb multiboot-cfe
    multiboot-cfe-paritionneur-v1-vuuno.ipk



    Code:
    ipkg install /tmp/dosfstools_3.0.11-r2_mipsel.ipk
    
    for Relocation after the flash flashed Abors installed this package and then installed multiboot-cfe
    dosfstools_3.0.11-r2_mipsel.ipk


    Code:
     
    ipkg install /tmp/multiboot-v*-cfe.ipk
     
    warning this version is a full version based on version 42a, but it jous the new database without erasing your USB key and it does a full install but you have to Abors paritionné with the usb multiboot-cfe -paritionneur-v1-vuplus.ipk if you have never installed this multiboot, it takes between 5 and 15 minutes until the end of the installation






    multiboot-beta-vuuno-v2-cfe.ipk



    Code:
    Here is the repair kit in case of lock on the boot
    vuplus-répare-env.zip







    waring when you put an image in multiboot, verified that the image is complete, otherwise the demo will remain on the console boot, and must be removed manually or parity approx flach reboot manually with a null modem cable

    news:

    if something goes wrong you need the rs232 cable with version 42b, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made ​​as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo



    Code:
    readme multiboot-cfe beta2 vuuno
    bug fix retrieval UBIFS
    bug fix on reboot same image
    Adding image aaf 3.1.1
    
    ----------------------------------
    readme multiboot-cfe beta1 vuuno
    add vtie 3.11 ,plie 3.11,off 3.11,vix 3.11,blackole 3.11












    -----------------------------




    how to install multiboot cfe?

    ----------------------------------

    have a usb of at least 2 gb

    ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuplus.ipk

    ipkg install /tmp/multiboot-v*-cfe.ipk






    rebooted at the end the demo




    how to install an image?

    -----------------------------

    go on the multiboot menu and select cfe jffs2 image retrieval

    but before downloading the image format you want to install usb and

    transfer the file "root_cfe_auto.jffs2" in / media / hdd / image once transferred

    sélélection the image you want to install and wait for extracting approximately

    5 to 15 minute warning to this step goes well it should have 1 internal hard drive to install

    Because of the swap and because we must save the file "root_cfe_auto.jffs2" in / media / hdd / image, noted

    esata that must walk as externally




    how to boot image?

    ---------------------------

    go on the multiboot menu and select cfe boot image and select the image that has been installed,

    attention must be that the image that you booted or installed in good parity, otherwise demo will remain on the starting

    and it will be restarted manually on flach with the RS232 cable, once selected the image that will boot, reboot




    how to get back on flach?

    -----------------------------

    go on the multiboot menu and select cfe return flach flach and back and rebooted the demo




    my demo stuck on starting in on an image bootent usb how to troubleshoot?

    -------------------------------------------------- -------------------------------------------

    do not panic, unplug your demo and removed the USB drive, connected the RS232 cable and connected with hyperterminal

    rekindled the demo and you should see the boot sequence demo and it will stop all alone when she vera not usb

    and will remain on the console of the CFE (bootloader)

    make it simple to troubleshoot as sa

    unsetenv STARTUP

    and rebooted and the demo in Redem flach


    news :

    if something goes wrong you need the rs232 cable with version 38, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made ​​as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo


    Thanks gigi


    Download
    Attached Files Attached Files

Similar Threads

  1. Experimental Image for DM800se
    By aguda in forum Dreambox DM 800 HD SE Images
    Replies: 276
    Last Post: 27-07-2012, 23:36:18
  2. Experimental Image DM 500HD
    By wahid in forum Dreambox DM 500 HD Images
    Replies: 430
    Last Post: 18-06-2012, 14:27:39
  3. Experimental Images For DM 800
    By sami.sami in forum Dreambox DM 800 HD PVR Images
    Replies: 536
    Last Post: 18-06-2012, 14:13:02
  4. Experimental Image-dm7025
    By wahid in forum Dreambox DM 7025 / DM 7025+ Images
    Replies: 439
    Last Post: 23-10-2011, 17:31:57
  5. Experimental Image for DM800
    By black1 in forum Turkish / Türkçe
    Replies: 0
    Last Post: 22-06-2008, 12:36:34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •