Page 13 of 14 FirstFirst ... 3811121314 LastLast
Results 121 to 130 of 132

Thread: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&#

  1. #121
    Junior Member
    Join Date
    05-05-2008
    Posts
    20
    Uploads
    0

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    oscam.server

    Тук ми се струва странно
    CAID = 4AEE:5581,5581
    според мен трябва да изглежда така
    CAID = 4AEE,5581
    и даже по-добре така
    CAID = 4AEE



    oscam.conf

    # newcamd port
    [newcamd]
    key = 0102030405060708091011121314
    port = 34000@5581:000000

    това си го направи така

    # newcamd port
    [newcamd]
    key = 0102030405060708091011121314
    port = 34000@4AEE:000000


    5581 не работи и няма смисъл да се нанапва нещо си

  2. #122
    Contributing Member
    Join Date
    20-03-2009
    Posts
    346
    Uploads
    281

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Quote Originally Posted by ivankarov View Post
    Конфиг плюс логове - http://dox.bg/files/dw?a=7e7387e35a


    Някакви идеи?
    Ето една идея от мен, пипал съм само по конфидзите на ''206 server bulsat v1 card'' в архива. След прилагането всичко трябва да си тръгне без проблем, и използвай актуална версия на кама.

  3. #123
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    525
    Uploads
    7

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Нещо му е странно субскрибшън инфото за новия месец... За какво му е идент в усер-конф-а, и не трябва ли да е `ident= 5581:000000;4AEE:000000' или поне `ident=4AEE:000000', @ceco2000 - пропуснал си в конф-а поправката която е споменал Онзи-то `port = 34000@4AEE:000000' - и аз мисля, че е важна

  4. #124
    Senior Member
    Join Date
    13-05-2006
    Location
    Bulgaria
    Posts
    113
    Uploads
    0

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Вчера се опитах да пусна булкрипт в.1 карта под оскам на Убунту, но нещо не ми се получи.

    # oscam.server

    [reader]label = bulsatcom
    protocol = mouse
    device = /dev/ttyUSB1
    key = 0102030405060708091011121314
    services = bulsatcom
    caid = 4AEE
    detect = cd
    mhz = 1000
    group = 2
    emmcache = 1,1,2,0
    lb_weight = 300

    [account]user = dm7020
    pwd = dm7020
    monlevel = 4
    au = bulsatcom
    group = 2
    services = bulsatcom

    2018/05/08 12:53:36 7B549995 h (reader) bulsatcom [bulcrypt] Restarting reader
    2018/05/08 12:53:36 7B549995 h (reader) bulsatcom [bulcrypt] creating thread for device /dev/ttyUSB1
    2018/05/08 12:53:36 2BC58C8A r (reader) bulsatcom [bulcrypt] Buffers readed 0 bytes total time_us 75097
    2018/05/08 12:53:36 2BC58C8A r (reader) bulsatcom [bulcrypt] Flush readed byte Nr 1 value 3b time_us 13026
    2018/05/08 12:53:36 2BC58C8A r (reader) bulsatcom [bulcrypt] Flush readed byte Nr 2 value 20 time_us 20
    2018/05/08 12:53:36 2BC58C8A r (reader) bulsatcom [bulcrypt] Flush readed byte Nr 3 value 00 time_us 17
    2018/05/08 12:53:36 2BC58C8A r (reader) bulsatcom [bulcrypt] Buffers readed 3 bytes total time_us 88215
    2018/05/08 12:53:36 2BC58C8A r (reader) bulsatcom [bulcrypt] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=1000, cardmhz=357)
    2018/05/08 12:53:37 2BC58C8A r (reader) bulsatcom [bulcrypt] card detected
    2018/05/08 12:53:37 2BC58C8A r (reader) bulsatcom [mouse] Buffers readed 0 bytes total time_us 75102
    2018/05/08 12:53:38 2BC58C8A r (reader) bulsatcom [mouse] ATR: 3B 20 00
    2018/05/08 12:53:38 2BC58C8A r (reader) bulsatcom [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
    2018/05/08 12:53:38 2BC58C8A r (reader) bulsatcom [mouse] Setting baudrate to 9600 bps
    2018/05/08 12:53:38 2BC58C8A r (reader) bulsatcom [mouse] Calculated work ETU is 37.20 us reader mhz = 1000
    2018/05/08 12:53:38 2BC58C8A r (reader) bulsatcom [mouse] Buffers readed 0 bytes total time_us 75098
    2018/05/08 12:53:38 2BC58C8A r (reader) bulsatcom [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 10.00 MHz (specified in reader->mhz)
    2018/05/08 12:53:39 2BC58C8A r (reader) bulsatcom [mouse] Bulcrypt card detected, checking card version.
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [mouse] Bulcrypt v1 card detected.
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [mouse] CAID: 0x4AEE|0x5581, CardType: 0x75, Serial: #############, HexSerial: ###########
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [mouse] Ready for requests.
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [mouse] found card system bulcrypt
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Reading subscription info.
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Subscription data last update : 2019-03-13 13:27:37 GMT
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Subscription should be active to : 2019-04-13 13:27:37 GMT
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Subscription data 1 (0x60a6): +-+--++-
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Subscription data 2 (0x60a6): +-+--++-
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Package 02 is active:
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Package 04 is active:
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Package 20 is active:
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Package 80 is active:
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] End subscription info.
    2018/05/08 12:53:50 4581BEEC c (ecm) dm7020 (4AEE@000000/0000/00A7/4F:00000000000000000000000000000000): invalid (0 ms)
    2018/05/08 12:54:28 4581BEEC c (ecm) dm7020 (4AEE@000000/0000/03F2/4F:00000000000000000000000000000000): invalid (0 ms)
    2018/05/08 12:54:38 4581BEEC c (ecm) dm7020 (4AEE@000000/0000/03F5/4F:00000000000000000000000000000000): invalid (0 ms)
    2018/05/08 12:54:44 4581BEEC c (ecm) dm7020 (4AEE@000000/0000/01D3/4F:00000000000000000000000000000000): invalid (0 ms)
    2018/05/08 12:55:03 4581BEEC c (ecm) dm7020 (4AEE@000000/0000/008B/4F:00000000000000000000000000000000): invalid (0 ms)
    2018/05/08 12:55:31 4581BEEC c (ecm) dm7020 (4AEE@000000/0000/002F/4F:00000000000000000000000000000000): invalid (0 ms)


  5. #125
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,644
    Uploads
    118

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    На първо четене махни този ред
    key = 0102030405060708091011121314
    Друга вероятна причина са редовете
    services = bulsatcom в четеца и потребителя
    Махни и тях и тествай

  6. #126
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    525
    Uploads
    7

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Оправи си часа на сървъра

  7. #127
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    525
    Uploads
    7

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Оправи си часа на сървъра, на au-то сложи =1, това за ъпдейтването

  8. #128
    Senior Member
    Join Date
    13-05-2006
    Location
    Bulgaria
    Posts
    113
    Uploads
    0

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    # oscam.server

    [reader]
    label = bulsatcom

    protocol = mouse
    device = /dev/ttyUSB1
    caid = 4AEE
    detect = cd
    mhz = 1000
    group = 2
    emmcache = 1,1,2,0
    lb_weight = 300
    [account]
    user = dm7020

    pwd = dm7020
    monlevel = 4
    au = 1
    group = 2
    Същата грешка. Какво разбираш под оправяне на часа?

    Опитах се да разбера какво значи тази грешка, но не намерих много информация в нета

  9. #129
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    525
    Uploads
    7

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Quote Originally Posted by riewsofia View Post
    Какво разбираш под оправяне на часа?
    2018/05/08 12:53:40 2BC58C8A r (reader) bulsatcom [bulcrypt] Subscription data last update : 2019-03-13 13:27:37 GMT
    ^^^^^^^^-------------------------------------------------------------------------------^^^^^^^^
    датата имах предвид, датата на лог-а ти е от преди почти година!
    На сървъра:
    За [account] добави и:
    cccmaxhops = 2
    cccreshare = 1

    а при рийдъра това:
    ident = 5581:000000;4AEE:000000

    а каид-а го оправи така, за да ти върви ъпдейта:
    caid = 5581,4AEE

    в oscam.dvbapi си сложи:
    P: 4aee 1

    в oscam.whitelist си сложи:
    l:4AEE:000000::::4F # Bulsatcom 39E
    l:4AEE:000000::::57 # Bulsatcom 39E

    Аре успех!

  10. #130
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,644
    Uploads
    118

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    5581 нужно ли е още?
    Иначе колегата не е дал какво има в dvbapi файла да не се окаже че там е проблема.
    Внимателно с whitelist понеже там си има специфики http://www.streamboard.tv/wiki/OSCam...scam.whitelist
    Моето мнение е при първоначално пускане с минимална конфигурация след това се правят донастройките

Page 13 of 14 FirstFirst ... 3811121314 LastLast

Similar Threads

  1. Replies: 189
    Last Post: 11-01-2016, 09:43:07
  2. Replies: 13
    Last Post: 26-10-2012, 20:48:14
  3. Replies: 20
    Last Post: 21-12-2011, 00:04:49
  4. Кокс сообщений для запуска одиннадцать н
    By erdoganeng in forum Russian / Русский
    Replies: 0
    Last Post: 30-11-2008, 06:30:13

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •