Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Как да направим overclock през RS232 към USB

  1. #1
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    503
    Uploads
    7

    Как да направим overclock през RS232 към USB

    Колеги, помагайте. Още преди месец си пуснах картата с ymod-a на DB500. Сега се боря с едно PC изрових си саморъчно направения феникс. Включвам го към USB с една доработка на UPS кабел (COM към USB). Много се узорих докато подкарам оскама. Не тръгва със стойности различни от 6MHz за Mhz и Cardmhz - но пък работи. Дава ми следното:
    2012/05/11 10:38:01 8B4D9B0 r reader usbreader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
    2012/05/11 10:38:02 8B4D9B0 r usbreader card detected
    2012/05/11 10:38:07 8B4D9B0 r ATR: 3B 20 00

    2012/05/11 10:38:07 8B4D9B0 r WARNING: your card is asking for custom_baudrate = 16129, but your configuration can only deliver custom_baudrate = 21505
    2012/05/11 10:38:07 8B4D9B0 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
    2012/05/11 10:38:07 8B4D9B0 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
    2012/05/11 10:38:08 8B4D9B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz

    2012/05/11 10:38:09 8B4D9B0 r [bulcrypt] Card detected.
    2012/05/11 10:38:11 8B4D9B0 r card system not supported
    2012/05/11 10:38:11 8B4D9B0 r Normal mode failed, reverting to Deprecated Mode
    2012/05/11 10:38:15 8B4D9B0 r ATR: 3B 20 00
    2012/05/11 10:38:16 8B4D9B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/05/11 10:38:17 8B4D9B0 r [bulcrypt] Card detected.
    2012/05/11 10:38:17 8B4D9B0 r [bulcrypt] CAID: 0x4AEE|0x5581, CardType: 0x75, Serial: 11 4xyzxy 121, HexSerial: ab cd ef
    2012/05/11 10:38:17 8B4D9B0 r [bulcrypt] Ready for requests.
    2012/05/11 10:38:17 8B4D9B0 r found cardsystem bulcrypt
    2012/05/11 10:38:17 8B4D9B0 r [bulcrypt] Reading subscription info.
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Subscription data last update : 2012-05-10 19:10:15 GMT
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Subscription should be active to : 2012-06-10 19:10:15 GMT
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Subscription data 1 (0x00a2): +-+---+-
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Subscription data 2 (0x00a2): +-+---+-
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Package 02 is active:
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Package 20 is active:
    2012/05/11 10:38:18 8B4D9B0 r [bulcrypt] Package 80 is active:

    и дрийма се закача и си дърпа информациата. Не знам още дали се ъпдейтва картата но това с времето ще се разбере. Има ли някой идея как да променя някои настройки, че да могат да се променят честотите. Рийдъра е сетнат на 3.58 MHz. Пробвах с 6 и с 8, оскама не тръгва и се връща промпта като чели съм го прекъснал с Ctrl-C

  2. #2
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,512
    Uploads
    112

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Колега пусни си феникса директно на com порта. Ако нямаш com порт купи си или usb феникс или rs-232 pci платка. Принципно на твоя четец четец му дай 3.57 както и на оскама и си го изполвай така, overclock с твоята конфигурация няма как да стане.

  3. #3
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    503
    Uploads
    7

    Re: Oscam+Bulcrypt - как да си го пуснем. Конфизи, клиенти, съ&a

    Quote Originally Posted by turbopower View Post
    Колега пусни си феникса директно на com порта. Ако нямаш com порт купи си или usb феникс или rs-232 pci платка.
    Мога да си гледам маправо от дрийма, ама нали знаеш - някои работи се правят от спортна страст. Машинката май се води bookPC, висока е 4 пръста и малко по-широка от педя. Има 2xUSB 1.1, няма COM (в същност има модем), само LPT (което ползвах за JTAG) и звукова карта, няма слотове, захранването дава само 12V дъното си го преобразува на 3,3 и 5 волта. Със CF карта съм го пуснал вместо с диск - та сега не знам дали ме разбираш ;)

    Quote Originally Posted by turbopower View Post
    Принципно на твоя четец четец му дай 3.57 както и на оскама и си го изполвай така, overclock с твоята конфигурация няма как да стане.
    Това съм и направил :( (кварца е на 3.58) но ми се щеше да си поиграя още. Така вече всичко свършва защото все пак заработи!

  4. #4
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,512
    Uploads
    112

    Re: Как да направим overclock през RS232 към USB

    Принципно трябва да смениш кварца на феникса и за да се получи трябва да накараш преобразувателя да си говори на един и същ baundrate с феникса и след това с компютъра.

    Ps. Местя ти темата в раздела за програматори, защото твоето питане се отнася до хардуер. При теб проблема не е от софтуера.

  5. #5

    Re: Как да направим overclock през RS232 към USB

    (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600) >> mhz=600, cardmhz=357 - а така пробва ли ? - в настройките на оскама!

  6. #6
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    503
    Uploads
    7

    Re: Как да направим overclock през RS232 към USB

    И така не става, оскама избива след няколко реда (от началото) без никаква грешка... ето демо:
    root@debian:~# /usr/local/bin/oscam-1.20-unstable_svn6737-i686-pc-linux -c /usr/local/etc
    22:41:00 0 s starting thread log_list_thread
    22:41:00 0 s log_list_thread thread started
    22:41:00 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6737 (i686-pc-linux)
    22:41:00 0 s version=1.20-unstable_svn, build #6737, system=i686-pc-linux, nice=-1
    22:41:00 0 s client max. idle=120 sec, debug level=0
    22:41:00 0 s max. logsize=1024 Kb, loghistorysize=4096 bytes
    22:41:00 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=240 ms
    22:41:00 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    22:41:00 0 s userdb reloaded: 9 accounts loaded, 0 expired, 1 disabled
    22:41:00 0 s signal handling initialized (type=sysv)
    22:41:00 0 s 58 service-id's loaded in 1ms
    22:41:00 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    22:41:00 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    22:41:00 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
    22:41:00 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    22:41:00 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    22:41:00 0 s Starting listener 0
    22:41:00 0 s monitor: initialized (fd=5, port=988)
    22:41:00 0 s Starting listener 0
    22:41:00 0 s cccam: initialized (fd=6, port=23000, crypted)
    22:41:00 0 s Starting listener 0
    22:41:00 0 s csp: disabled
    22:41:00 0 s starting thread http
    root@debian:~#

  7. #7

    Re: Как да направим overclock през RS232 към USB

    настройки по-горе няма нищо общо с това че не тръгва, търси другаде.

  8. #8
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,512
    Uploads
    112

    Re: Как да направим overclock през RS232 към USB

    Добави към стартиращата команда -d 255 и ще ти даде по ясен лог.

  9. #9
    Contributing Member mminkov's Avatar
    Join Date
    27-02-2011
    Location
    Shumen, BG
    Posts
    503
    Uploads
    7

    Re: Как да направим overclock през RS232 към USB

    Quote Originally Posted by turbopower View Post
    Добави към стартиращата команда -d 255 и ще ти даде по ясен лог.
    Ето Лог с -d 255, ама ми се струва, че няма да се оправи:
    Code:
    -------------------------------------------------------------------------------
    >> OSCam <<  cardserver started at Mon May 14 08:41:17 2012
    -------------------------------------------------------------------------------
    2012/05/14 08:41:17        0 s starting thread log_list_thread
    2012/05/14 08:41:17        0 s log_list_thread thread started
    2012/05/14 08:41:17        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #6737 (i686-pc-linux)
    2012/05/14 08:41:17        0 s version=1.20-unstable_svn, build #6737, system=i686-pc-linux, nice=-1
    2012/05/14 08:41:17        0 s client max. idle=120 sec, debug level=0
    2012/05/14 08:41:17        0 s max. logsize=1024 Kb, loghistorysize=4096 bytes
    2012/05/14 08:41:17        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=240 ms
    2012/05/14 08:41:17        0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    2012/05/14 08:41:17        0 s userdb reloaded: 9 accounts loaded, 0 expired, 1 disabled
    2012/05/14 08:41:17        0 s signal handling initialized (type=sysv)
    2012/05/14 08:41:17        0 s 58 service-id's loaded in 0ms
    2012/05/14 08:41:17        0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    2012/05/14 08:41:17        0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    2012/05/14 08:41:17        0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
    2012/05/14 08:41:17        0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    2012/05/14 08:41:17        0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    2012/05/14 08:41:17        0 s Starting listener 0
    2012/05/14 08:41:17        0 s monitor: initialized (fd=5, port=988)
    2012/05/14 08:41:17        0 s Starting listener 0
    2012/05/14 08:41:17        0 s cccam: initialized (fd=6, port=23000, crypted)
    2012/05/14 08:41:17        0 s Starting listener 0
    2012/05/14 08:41:17        0 s csp: disabled
    2012/05/14 08:41:17        0 s starting thread http
    2012/05/14 08:41:17        0 s http thread started
    2012/05/14 08:41:17        0 s starting thread reader check
    2012/05/14 08:41:17        0 s reader check thread started
    2012/05/14 08:41:17        0 s starting thread check
    2012/05/14 08:41:17        0 s check thread started
    2012/05/14 08:41:17        0 s creating thread for device /dev/ttyUSB0
    2012/05/14 08:41:17        0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/05/14 08:41:17        0 s anti cascading disabled
    2012/05/14 08:41:17  8BEB308 h HTTP Server listening on port 9000
    2012/05/14 08:41:19  8BD4680 r reader usbreader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
    2012/05/14 08:41:20  8BD4680 r usbreader card detected
    2012/05/14 08:41:24  8BD4680 r ATR: 3B 20 00 
    2012/05/14 08:41:24  8BD4680 r WARNING: your card is asking for custom_baudrate = 16129, but your configuration can only deliver custom_baudrate = 21505
    2012/05/14 08:41:24  8BD4680 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
    2012/05/14 08:41:24  8BD4680 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
    2012/05/14 08:41:26  8BD4680 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/05/14 08:41:27  8BD4680 r [bulcrypt] Card detected.
    2012/05/14 08:41:27  8BD4680 r card system not supported
    2012/05/14 08:41:27  8BD4680 r Normal mode failed, reverting to Deprecated Mode
    2012/05/14 08:41:31  8BD4680 r ATR: 3B 20 00 
    2012/05/14 08:41:32  8BD4680 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/05/14 08:41:33  8BD4680 r [bulcrypt] Card detected.
     2012/05/14 08:41:34  8BD4680 r [bulcrypt] CAID: 0x4AEE|0x5581, CardType: 0x75, Serial: , HexSerial: 
    2012/05/14 08:41:34  8BD4680 r [bulcrypt] Ready for requests.
    2012/05/14 08:41:34  8BD4680 r found cardsystem bulcrypt
    2012/05/14 08:41:34  8BD4680 r [bulcrypt] Reading subscription info.
    2012/05/14 08:41:34  8BD4680 r [bulcrypt] Subscription data last update    : 2012-05-12 12:06:00 GMT
    2012/05/14 08:41:34  8BD4680 r [bulcrypt] Subscription should be active to : 2012-06-12 12:06:00 GMT
    2012/05/14 08:41:34  8BD4680 r [bulcrypt] Subscription data 1 (0x00a6): +-+--++-
    2012/05/14 08:41:34  8BD4680 r [bulcrypt] Subscription data 2 (0x00a6): +-+--++-
    2012/05/14 08:41:34  8BD4680 r [bulcrypt]   Package 02 is active: 
    2012/05/14 08:41:34  8BD4680 r [bulcrypt]   Package 04 is active: 
    2012/05/14 08:41:34  8BD4680 r [bulcrypt]   Package 20 is active: 
    2012/05/14 08:41:34  8BD4680 r [bulcrypt]   Package 80 is active: 
    2012/05/14 08:42:45        0 s thread B74D86C0 exit with signal 2
    2012/05/14 08:42:45        0 s cardserver down
    
    -------------------------------------------------------------------------------
    >> OSCam <<  cardserver started at Mon May 14 08:42:53 2012
    -------------------------------------------------------------------------------
    2012/05/14 08:42:53        0 s starting thread log_list_thread
    2012/05/14 08:42:53        0 s log_list_thread thread started
    2012/05/14 08:42:53        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #6737 (i686-pc-linux)
    2012/05/14 08:42:53        0 s version=1.20-unstable_svn, build #6737, system=i686-pc-linux, nice=-1
    2012/05/14 08:42:53        0 s client max. idle=120 sec, debug level=255
    2012/05/14 08:42:53        0 s max. logsize=1024 Kb, loghistorysize=4096 bytes
    2012/05/14 08:42:53        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=240 ms
    2012/05/14 08:42:53        0 s share updater thread started
    2012/05/14 08:42:53        0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    2012/05/14 08:42:53        0 s reader 'usbreader' provid filter(s):
    2012/05/14 08:42:53        0 s CAID #0: 5581
    2012/05/14 08:42:53        0 s provid #0: 000000
    2012/05/14 08:42:53        0 s CAID #1: 4AEE
    2012/05/14 08:42:53        0 s provid #0: 000000
    2012/05/14 08:42:53        0 s userdb reloaded: 9 accounts loaded, 0 expired, 1 disabled
    2012/05/14 08:42:53        0 s signal handling initialized (type=sysv)
    2012/05/14 08:42:53        0   share-updater mode=initfast t=1s i=30
    2012/05/14 08:42:53        0 s 58 service-id's loaded in 0ms
    2012/05/14 08:42:53        0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    2012/05/14 08:42:53        0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    2012/05/14 08:42:53        0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
    2012/05/14 08:42:53        0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    2012/05/14 08:42:53        0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    2012/05/14 08:42:53        0 s Starting listener 0
    2012/05/14 08:42:53        0 s monitor: initialized (fd=5, port=988)
    2012/05/14 08:42:53        0 s Starting listener 0
    2012/05/14 08:42:53        0 s cccam: initialized (fd=6, port=23000, crypted)
    2012/05/14 08:42:53        0 s Starting listener 0
    2012/05/14 08:42:53        0 s csp: disabled
    2012/05/14 08:42:53        0 s starting thread http
    2012/05/14 08:42:53        0 s http thread started
    2012/05/14 08:42:53        0 s starting thread reader check
    2012/05/14 08:42:53        0 s reader check thread started
    2012/05/14 08:42:53        0 s starting thread check
    2012/05/14 08:42:53        0 s check thread started
    2012/05/14 08:42:53        0 s cardreader: Initializing
    2012/05/14 08:42:53        0 s creating thread for device /dev/ttyUSB0
    2012/05/14 08:42:53        0 s start reader thread action 8
    2012/05/14 08:42:53        0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/05/14 08:42:53        0 s anti cascading disabled
    2012/05/14 08:42:53  9D17128 h HTTP Server listening on port 9000
    2012/05/14 08:42:53  9D009D8 r data from add_job action=8 client r usbreader
    2012/05/14 08:42:53  9D009D8 r IFD: Opening device /dev/ttyUSB0
    
    2012/05/14 08:42:53  9D009D8 r standard baudrate: cardmhz=600 mhz=600 -> effective baudrate 1200
    2012/05/14 08:42:53  9D009D8 r IO: Setting properties
    
    2012/05/14 08:42:53  9D009D8 r IO: Setting DTR=1
    2012/05/14 08:42:53  9D009D8 r IO: Setting RTS=0
    2012/05/14 08:42:53  9D009D8 r IO: Receiving:
    2012/05/14 08:42:53  9D009D8    79 
    2012/05/14 08:42:53  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:42:53  9D009D8 r IO: Receiving:
    2012/05/14 08:42:53  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:42:54        0   share-update [1] 3817498742 0
    2012/05/14 08:42:54        0   s-card added: id        0 remoteid    10001 caid 4AEE hop 0 reshare 2 originid        0 cardtype 1
    2012/05/14 08:42:54        0   s-card added: id        0 remoteid    10000 caid 5581 hop 0 reshare 2 originid        0 cardtype 1
    2012/05/14 08:42:54        0   reported/updated +2/-0/dup 0 of 2 cards to sharelist
    2012/05/14 08:42:54        0   share-updater mode=initfast t=1s i=30
    2012/05/14 08:42:54  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:42:54  9D009D8 r IO: Receiving:
    2012/05/14 08:42:54  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:42:54  9D009D8 r IFD: Initializing reader usbreader type=5
    
    2012/05/14 08:42:54  9D009D8 r standard baudrate: cardmhz=600 mhz=600 -> effective baudrate 9600
    2012/05/14 08:42:54  9D009D8 r IO: Setting properties
    
    2012/05/14 08:42:54  9D009D8 r IO: Setting DTR=1
    2012/05/14 08:42:54  9D009D8 r IO: Setting RTS=0
    2012/05/14 08:42:54  9D009D8 r IO: Receiving:
    2012/05/14 08:42:54  9D009D8    3B 
    2012/05/14 08:42:54  9D009D8 r IO: Receiving:
    2012/05/14 08:42:54  9D009D8    20 
    2012/05/14 08:42:54  9D009D8 r IO: Receiving:
    2012/05/14 08:42:54  9D009D8    00 
    2012/05/14 08:42:55        0   share-updater mode=initfast t=1s i=29
    2012/05/14 08:42:55  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:42:55  9D009D8 r IO: Receiving:
    2012/05/14 08:42:55  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:42:55  9D009D8 r IFD: Device /dev/ttyUSB0 succesfully opened
    
    2012/05/14 08:42:55  9D009D8 r reader usbreader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
    2012/05/14 08:42:55  9D009D8 r ending thread
    2012/05/14 08:42:56        0   share-updater mode=initfast t=1s i=28
    2012/05/14 08:42:56        0   start reader thread action 11
    2012/05/14 08:42:56  9D009D8 r data from add_job action=11 client r usbreader
    2012/05/14 08:42:56  9D009D8 r usbreader card detected
    2012/05/14 08:42:56  9D009D8 r add reader job action 4
    2012/05/14 08:42:56  9D009D8 r IFD: Activating card in reader usbreader
    
    2012/05/14 08:42:56  9D009D8 r IFD: Resetting card:
    
    2012/05/14 08:42:56  9D009D8 r IFD: Phoenix Setting baudrate to 9600
    
    2012/05/14 08:42:56  9D009D8 r standard baudrate: cardmhz=600 mhz=600 -> effective baudrate 9600
    2012/05/14 08:42:56  9D009D8 r IO: Setting properties
    
    2012/05/14 08:42:57        0   share-update [1] 4109466677 3817498742
    2012/05/14 08:42:57        0   reported/updated +0/-0/dup 0 of 2 cards to sharelist
    2012/05/14 08:42:57        0   share-updater mode=initfast t=1s i=30
    2012/05/14 08:42:57  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:42:57  9D009D8 r IO: Receiving:
    2012/05/14 08:42:57  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:42:57  9D009D8 r IFD: Setting parity from Even to Even
    
    2012/05/14 08:42:58        0   share-updater mode=initfast t=1s i=29
    2012/05/14 08:42:58  9D009D8 r IO: Setting RTS=1
    2012/05/14 08:42:58  9D009D8 r IO: Setting RTS=0
    2012/05/14 08:42:58  9D009D8 r IO: Receiving:
    2012/05/14 08:42:58  9D009D8    3B 
    2012/05/14 08:42:58  9D009D8 r IO: Receiving:
    2012/05/14 08:42:58  9D009D8    20 
    2012/05/14 08:42:58  9D009D8 r IO: Receiving:
    2012/05/14 08:42:58  9D009D8    00 
    2012/05/14 08:42:59        0   share-updater mode=initfast t=1s i=28
    2012/05/14 08:42:59  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:42:59  9D009D8 r IO: Receiving:
    2012/05/14 08:42:59  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:00        0   share-updater mode=initfast t=1s i=27
    2012/05/14 08:43:00  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:43:00  9D009D8 r IO: Receiving:
    2012/05/14 08:43:00  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:00  9D009D8 r ATR: 3B 20 00 
    2012/05/14 08:43:00  9D009D8 r TB1=00 no TD1 means T0
    2012/05/14 08:43:00  9D009D8 r 1 protocol types detected. Historical bytes: 
    2012/05/14 08:43:00  9D009D8 r No PTS needed, selected protocol T0, F=372, D=1.000000, N=0
    
    2012/05/14 08:43:00  9D009D8 r IFD: Phoenix Setting baudrate to 16129
    
    2012/05/14 08:43:00  9D009D8 r custom baudrate: cardmhz=600 mhz=600 custom_baud=16129 baud_base=21505 divisor=1 -> effective baudrate 21505
    2012/05/14 08:43:00  9D009D8 r WARNING: your card is asking for custom_baudrate = 16129, but your configuration can only deliver custom_baudrate = 21505
    2012/05/14 08:43:00  9D009D8 r You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
    2012/05/14 08:43:00  9D009D8 r You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
    2012/05/14 08:43:00  9D009D8 r IO: Setting properties
    
    2012/05/14 08:43:01  9D009D8 r Setting baudrate to 16129
    2012/05/14 08:43:01  9D009D8 r Setting timings: timeout=594 ms, block_delay=0 ms, char_delay=0 ms
    2012/05/14 08:43:01  9D009D8 r Protocol: T=0: WWT=9600, Clockrate=6000000
    
    2012/05/14 08:43:01  9D009D8 r IFD: Setting parity from Even to Even
    
    2012/05/14 08:43:01        0   share-updater mode=initfast t=1s i=26
    2012/05/14 08:43:02  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:43:02  9D009D8 r IO: Receiving:
    2012/05/14 08:43:02  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:02  9D009D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/05/14 08:43:02  9D009D8 r IFD: Card in reader usbreader succesfully activated
    
    2012/05/14 08:43:02        0   share-updater mode=initfast t=1s i=25
    2012/05/14 08:43:03  9D009D8 r [bulcrypt] Card detected.
    2012/05/14 08:43:03  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 12 08 56 47 38 29 10 AF BE CD 
    2012/05/14 08:43:03  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:03  9D009D8 r IO: Sending: 
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:03  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:03  9D009D8 r IO: Receiving:
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:03  9D009D8 r IO: Receiving:
    2012/05/14 08:43:03  9D009D8    F8 
    2012/05/14 08:43:03  9D009D8 r IFD Received: 
    2012/05/14 08:43:03  9D009D8    F8 
    2012/05/14 08:43:03  9D009D8 r ERROR Protocol_T0_ExchangeTPDU: Received unexpected character F8
    2012/05/14 08:43:03  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:03  9D009D8 r IO: Sending: 
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:03  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:03  9D009D8 r IO: Receiving:
    2012/05/14 08:43:03  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:03  9D009D8 r IO: Receiving:
    2012/05/14 08:43:03  9D009D8    F8 
    2012/05/14 08:43:03  9D009D8 r IFD Received: 
    2012/05/14 08:43:03  9D009D8    F8 
    2012/05/14 08:43:03  9D009D8 r ERROR Protocol_T0_ExchangeTPDU: Received unexpected character F8
    2012/05/14 08:43:03  9D009D8 r ERROR, function call Protocol_T0_Command returns error.
    2012/05/14 08:43:03  9D009D8 r card system not supported
    2012/05/14 08:43:03  9D009D8 r Normal mode failed, reverting to Deprecated Mode
    2012/05/14 08:43:03  9D009D8 r IFD: Activating card in reader usbreader
    
    2012/05/14 08:43:03  9D009D8 r IFD: Resetting card:
    
    2012/05/14 08:43:03  9D009D8 r IFD: Phoenix Setting baudrate to 9600
    
    2012/05/14 08:43:03  9D009D8 r standard baudrate: cardmhz=600 mhz=600 -> effective baudrate 9600
    2012/05/14 08:43:03        0   share-update [1] 938685054 4109466677
    2012/05/14 08:43:03        0   reported/updated +0/-0/dup 0 of 2 cards to sharelist
    2012/05/14 08:43:03        0   share-updater mode=initfast t=1s i=30
    2012/05/14 08:43:03  9D009D8 r IO: Setting properties
    
    2012/05/14 08:43:04        0   share-updater mode=initfast t=1s i=29
    2012/05/14 08:43:04  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:43:04  9D009D8 r IO: Receiving:
    2012/05/14 08:43:04  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:04  9D009D8 r IFD: Setting parity from Even to Even
    
    2012/05/14 08:43:05  9D009D8 r IO: Setting RTS=1
    2012/05/14 08:43:05        0   share-updater mode=initfast t=1s i=28
    2012/05/14 08:43:05  9D009D8 r IO: Setting RTS=0
    2012/05/14 08:43:05  9D009D8 r IO: Receiving:
    2012/05/14 08:43:05  9D009D8    3B 
    2012/05/14 08:43:05  9D009D8 r IO: Receiving:
    2012/05/14 08:43:05  9D009D8    20 
    2012/05/14 08:43:05  9D009D8 r IO: Receiving:
    2012/05/14 08:43:05  9D009D8    00 
    2012/05/14 08:43:06        0   share-updater mode=initfast t=1s i=27
    2012/05/14 08:43:06  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:43:06  9D009D8 r IO: Receiving:
    2012/05/14 08:43:06  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:07        0   share-updater mode=initfast t=1s i=26
    2012/05/14 08:43:07  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:43:07  9D009D8 r IO: Receiving:
    2012/05/14 08:43:07  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:07  9D009D8 r ATR: 3B 20 00 
    2012/05/14 08:43:07  9D009D8 r TB1=00 no TD1 means T0
    2012/05/14 08:43:07  9D009D8 r 1 protocol types detected. Historical bytes: 
    2012/05/14 08:43:07  9D009D8 r No PTS needed, selected protocol T0, F=372, D=1.000000, N=0
    
    2012/05/14 08:43:07  9D009D8 r Setting timings: timeout=998 ms, block_delay=0 ms, char_delay=0 ms
    2012/05/14 08:43:07  9D009D8 r Protocol: T=0: WWT=9600, Clockrate=6000000
    
    2012/05/14 08:43:07  9D009D8 r IFD: Setting parity from Even to Even
    
    2012/05/14 08:43:08        0   share-updater mode=initfast t=1s i=25
    2012/05/14 08:43:08  9D009D8 r TIMEOUT in IO_Serial_WaitToRead
    2012/05/14 08:43:08  9D009D8 r IO: Receiving:
    2012/05/14 08:43:08  9D009D8 r TIMEOUT in IO_Serial_Read
    2012/05/14 08:43:08  9D009D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/05/14 08:43:08  9D009D8 r IFD: Card in reader usbreader succesfully activated
    
    2012/05/14 08:43:09        0   share-updater mode=initfast t=1s i=24
    2012/05/14 08:43:09  9D009D8 r [bulcrypt] Card detected.
    2012/05/14 08:43:09  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    DE 1C 00 00 0A 12 08 56 47 38 29 10 AF BE CD 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:09  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:09  9D009D8 r IO: Sending: 
    2012/05/14 08:43:09  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    DE 1C 00 00 0A 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    1C 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    1C 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:09  9D009D8    12 08 56 47 38 29 10 AF BE CD 
    2012/05/14 08:43:09  9D009D8 r IO: Sending: 
    2012/05/14 08:43:09  9D009D8    12 08 56 47 38 29 10 AF BE CD 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    12 08 56 47 38 29 10 AF BE CD 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    90 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    90 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    00 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    00 
    2012/05/14 08:43:09  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    90 00 
    2012/05/14 08:43:09  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    DE 16 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:09  9D009D8    DE 16 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IO: Sending: 
    2012/05/14 08:43:09  9D009D8    DE 16 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    DE 16 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    16 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    16 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    90 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    90 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    03 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    03 
    2012/05/14 08:43:09  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    90 03 
    2012/05/14 08:43:09  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:09  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:09  9D009D8 r IO: Sending: 
    2012/05/14 08:43:09  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    1E 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    1E 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    01 01 75 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    01 01 75 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    90 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    90 
    2012/05/14 08:43:09  9D009D8 r IO: Receiving:
    2012/05/14 08:43:09  9D009D8    00 
    2012/05/14 08:43:09  9D009D8 r IFD Received: 
    2012/05/14 08:43:09  9D009D8    00 
    2012/05/14 08:43:09  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    01 01 75 90 00 
    2012/05/14 08:43:09  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:09  9D009D8    DE 0A 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:09  9D009D8    DE 0A 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IO: Sending: 
    2012/05/14 08:43:09  9D009D8    DE 0A 00 00 00 
    2012/05/14 08:43:09  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 0A 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    0A 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    0A 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    03 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    03 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    90 03 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 03 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    08 01 00 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    08 01 00 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    08 01 00 90 00 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 18 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 18 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 18 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 18 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    18 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    18 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    06 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    06 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    90 06 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 06 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 06 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 06 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 06 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    02 04 00 28 C6 0B 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    02 04 00 28 C6 0B 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    02 04 00 28 C6 0B 90 00 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 1A 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 1A 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 1A 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 1A 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    1A 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    1A 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    0F 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    0F 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    90 0F 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 0F 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 0F 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 0F 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 0F 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    05 0D 31 31 20 34 3x 3x 3x 3x 3x 20 31 32 31 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    05 0D 31 31 20 34 3x 3x 3x 3x 3x 20 31 32 31 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    05 0D 31 31 20 34 3x 3x 3x 3x 3x 20 31 32 31 90 
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 20 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 20 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 20 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 20 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    00 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    90 00 
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] CAID: 0x4AEE|0x5581, CardType: 0x75, Serial: 11 4xxxxx 121, HexSerial: xx xx xx
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] Ready for requests.
    2012/05/14 08:43:10  9D009D8 r found cardsystem bulcrypt
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] Reading subscription info.
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 06 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 06 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 06 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 06 00 00 00 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    06 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    06 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    2B 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    2B 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    90 2B 
    2012/05/14 08:43:10  9D009D8 r write to cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 2B 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 2B 
    2012/05/14 08:43:10  9D009D8 r IO: Sending: 
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 2B 
    2012/05/14 08:43:10  9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    DE 1E 00 00 2B 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    1E 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    13 29 0B 4F AE 52 28 3C 84 00 00 00 00 00 00 00 
    2012/05/14 08:43:10  9D009D8    00 00 00 00 00 00 00 00 A6 3C A2 00 00 00 00 00 
    2012/05/14 08:43:10  9D009D8    00 00 00 00 00 00 00 00 00 00 A6 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    13 29 0B 4F AE 52 28 3C 84 00 00 00 00 00 00 00 
    2012/05/14 08:43:10  9D009D8    00 00 00 00 00 00 00 00 A6 3C A2 00 00 00 00 00 
    2012/05/14 08:43:10  9D009D8    00 00 00 00 00 00 00 00 00 00 A6 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    90 
    2012/05/14 08:43:10  9D009D8 r IO: Receiving:
    2012/05/14 08:43:10  9D009D8    2B 
    2012/05/14 08:43:10  9D009D8 r IFD Received: 
    2012/05/14 08:43:10  9D009D8    2B 
    2012/05/14 08:43:10  9D009D8 r answer from cardreader usbreader:
    2012/05/14 08:43:10  9D009D8    13 29 0B 4F AE 52 28 3C 84 00 00 00 00 00 00 00 
    2012/05/14 08:43:10  9D009D8    00 00 00 00 00 00 00 00 A6 3C A2 00 00 00 00 00 
    2012/05/14 08:43:10  9D009D8    00 00 00 00 00 00 00 00 00 00 A6 90 2B 
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] Subscription data last update    : 2012-05-12 12:06:00 GMT
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] Subscription should be active to : 2012-06-12 12:06:00 GMT
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] Subscription data 1 (0x00a6): +-+--++-
    2012/05/14 08:43:10  9D009D8 r [bulcrypt] Subscription data 2 (0x00a6): +-+--++-
    2012/05/14 08:43:10  9D009D8 r [bulcrypt]   Package 02 is active: 
    2012/05/14 08:43:10  9D009D8 r [bulcrypt]   Package 04 is active: 
    2012/05/14 08:43:10  9D009D8 r [bulcrypt]   Package 20 is active: 
    2012/05/14 08:43:10  9D009D8 r [bulcrypt]   Package 80 is active: 
    2012/05/14 08:43:10  9D009D8 r ending thread
    2012/05/14 08:43:10        0   share-update [1] 2035478888 938685054
    2012/05/14 08:43:10        0   s-card added: id        0 remoteid    10001 caid 4AEE hop 0 reshare 2 originid        0 cardtype 1
    2012/05/14 08:43:10        0   s-card added: id        0 remoteid    10000 caid 5581 hop 0 reshare 2 originid        0 cardtype 1
    2012/05/14 08:43:10        0   reported/updated +2/-0/dup 0 of 4 cards to sharelist
    2012/05/14 08:43:10        0   share-updater mode=initfast t=1s i=30
    2012/05/14 08:43:10        0   start reader thread action 11
    2012/05/14 08:43:10  9D009D8 r data from add_job action=11 client r usbreader
    2012/05/14 08:43:10  9D009D8 r ending thread
    2012/05/14 08:43:11        0   share-updater mode=initfast t=1s i=29
    2012/05/14 08:43:11        0   start reader thread action 11
    2012/05/14 08:43:11  9D009D8 r data from add_job action=11 client r usbreader
    и после продължава да намаля стойноста на i (третия ред отдолу нагоре) до стойност 0

  10. #10
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,512
    Uploads
    112

    Re: Как да направим overclock през RS232 към USB

    2012/05/14 08:43:03 9D009D8 r IO: Receiving:
    2012/05/14 08:43:03 9D009D8 DE 1C 00 00 0A
    2012/05/14 08:43:03 9D009D8 r IO: Receiving:
    2012/05/14 08:43:03 9D009D8 F8
    2012/05/14 08:43:03 9D009D8 r IFD Received:
    2012/05/14 08:43:03 9D009D8 F8
    2012/05/14 08:43:03 9D009D8 r ERROR Protocol_T0_ExchangeTPDU: Received unexpected character F8
    2012/05/14 08:43:03 9D009D8 r IFD Transmit:
    2012/05/14 08:43:03 9D009D8 DE 1C 00 00 0A
    2012/05/14 08:43:03 9D009D8 r IO: Sending:
    2012/05/14 08:43:03 9D009D8 DE 1C 00 00 0A
    2012/05/14 08:43:03 9D009D8 r IFD Transmit succesful
    2012/05/14 08:43:03 9D009D8 r IO: Receiving:
    2012/05/14 08:43:03 9D009D8 DE 1C 00 00 0A
    2012/05/14 08:43:03 9D009D8 r IO: Receiving:
    2012/05/14 08:43:03 9D009D8 F8
    2012/05/14 08:43:03 9D009D8 r IFD Received:
    2012/05/14 08:43:03 9D009D8 F8
    2012/05/14 08:43:03 9D009D8 r ERROR Protocol_T0_ExchangeTPDU: Received unexpected character F8
    2012/05/14 08:43:03 9D009D8 r ERROR, function call Protocol_T0_Command returns error.
    2012/05/14 08:43:03 9D009D8 r card system not supported
    2012/05/14 08:43:03 9D009D8 r Normal mode failed, reverting to Deprecated Mode
    2012/05/14 08:43:03 9D009D8 r IFD: Activating card in reader usbreader
    2012/05/14 08:43:03 9D009D8 r IFD: Resetting card:
    2012/05/14 08:43:03 9D009D8 r IFD: Phoenix Setting baudrate to 9600

    Това показва че не можеш да пуснеш картата на повече от 3.57 затова задавай стойности в оскам 357 и 357, слагай феникса на 3.57. Така ще работи нормално. За оверклок само смартго или усб базиран феникс.

Page 1 of 2 12 LastLast

Similar Threads

  1. Канaли с пряко предаване на Формула 1
    By turbopower in forum Bulgarian / Български
    Replies: 10
    Last Post: 28-10-2012, 09:38:26
  2. Replies: 20
    Last Post: 21-12-2011, 00:04:49
  3. Айде и аз да разменя с малко българчета :)
    By adskiqt in forum Без реални карти
    Replies: 0
    Last Post: 03-12-2009, 14:38:40
  4. Препоръка за евтин приемник
    By goiko in forum Сателитни приемници и Антени
    Replies: 2
    Last Post: 26-03-2008, 16:59:33
  5. Replies: 0
    Last Post: 16-06-2005, 15:49:56

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •