Results 1 to 4 of 4

Thread: How to OSCam and dvbapi on Dreambox / VU+

  1. #1
    Webmaster Sat-TV's Avatar
    Join Date
    03-03-2005
    Location
    Amsterdam (Netherlands)
    Posts
    3,372
    Uploads
    1,669

    Question How to OSCam and dvbapi on Dreambox / VU+

    This is a complete minimal-configuration of oscam running on a Dreambox .

    Oscam is reading the card from internal reader. Oscam is also decrypting the channels using the built-in softcam "dvbapi".
    Oscam even updates the card using these settings. (Supported cards "EMM: OK" here). No other softcam necessary!
    All you've got to do is CHANGE THE CAID (cardID) AND IDENT (Providers) in the reader (in oscam.server) to match your card.

    This is a basic configuration which runs out of the box.

    first is the global configuration. All listeners ("server processes") are here could be newcamd- cccam- camd3x- web-server or dvbapi, the "built-in softcam" of oscam

    oscam.conf
    Code:
    [global]
    Nice = -10
    WaitForCards = 1
    PreferLocalCards = 1
    saveinithistory = 1
    
    [monitor]
    port = 988
    monlevel = 4
    nocrypt = 127.0.0.1
    
    [webif]
    httpport = 10001
    httprefresh = 5
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    
    [dvbapi]
    enabled =1
    boxtype = dreambox
    user = localuser
    au = 1
    next is the reader configuration. where oscam finds it's cards. could be real card-readers, or remote servers on any protocol .

    oscam.server
    Code:
    [reader]
    label = myreadername
    enable = 1
    protocol = internal
    device = /dev/sci0
    detect = cd
    caid = 0123 <---put your caid here
    ident = 0123:123456,234567 <---put your caid:ident,ident,... here
    group = 1
    emmcache = 1,3,2
    and finally the user configuration. users who are allowed to connect to this oscam. Like our local dvbapi-user, or remote users for any protocol.

    oscam.user
    Code:
    [account]
    user = localuser
    group = 1
    au = myreadername
    Many Many Many other functions can be added to this configuration to enhance or add features.

    If you'd like to share your card, you have to add server-processes in oscam.conf,
    like a newcamd-protocol-server or cccam-protocol-server or other protocol server.
    Doing so, different remote cardservers or softcams like oscam, cccam, newcs, etc... are allowed to connect using the corresponding protocols.
    Then add accounts in oscam.user so that our oscam accepts connections from these remotes.

    If you want to connect to remote cardservers, you have to add readers in oscam.server,
    like newcamd-protocol connections or cccam-protocol connections or other protocol connections.
    Doing so, your oscam reads cards from remote cardservers or softcams like oscam, cccam, newcs, etc... using the corresponding protocols.

    For more information it's strongly recommended to read the documentation which came with oscam

    Remember any changes to oscam configs take effect after restart of oscam!

  2. #2
    New Member
    Join Date
    30-04-2006
    Posts
    1
    Uploads
    0

    Re: How to OSCam and dvbapi on Dreambox / VU+

    Why api taken from all Reader ecm, at the same time? It should, one by one.

  3. #3
    New Member
    Join Date
    03-02-2016
    Posts
    3
    Uploads
    0

    Re: How to OSCam and dvbapi on Dreambox / VU+

    Hi.

    I am trying to get this to work, but something is wrong.

    I have one Vu+Solo2 with Oscam and one DB800HD with newcs.

    In the Vu+Solo2 i have CD-card and the DB800 has no problem to acces and get decryption.

    But on the DB800 i have VIA-card and I can not get the VU+Solo to log in on newcs.

    I have prepaired the Vu+Solo2 to read VIA-card, but not succided, so i decativated that reader and instead want to read from th DB800

    Can some one give usefull advice, please ?

    Here are my config files on Vu+Solo2

    Oscam.conf

    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11209
    # Read more: http://www.streamboard.tv/svn/oscam/...oscam.conf.txt
    [global]
    logfile = /var/log/oscam/oscam.log
    pidfile = /var/run/oscam.pid
    disableuserfile = 0
    unlockparental = 1
    nice = -10
    preferlocalcards = 1
    usrfile = /var/log/oscam/oscamuser.log
    cwlogdir = /var/log/oscam/cw
    [cache]
    [newcamd]
    port = 10000@0B00:000000,FFFFFF
    key = 0102030405060708091011121314
    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 6
    user = dvbapiau
    boxtype = dreambox
    [monitor]
    port = 988
    nocrypt = 127.0.0.1
    aulow = 120
    monlevel = 4
    [webif]
    httpport = 9999
    httpuser = xxxxx
    httppwd = xxxxx
    httprefresh = 5
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    aulow = 120

    Oscam.server


    [reader]
    label = lower_card_CanalDigital
    enable = 1
    protocol = internal
    device = /dev/sci0
    detect = cd
    group = 1
    caid = 0B00
    emmcache = 1,3,15
    audisabled = 0
    mhz = 357
    cardmhz = 357
    ratelimitecm = 4
    ratelimittime = 9000
    ecmunique = 1
    srvidholdtime = 2000
    cooldown = 30,600

    [reader]
    label = upper_card_Viasat
    enable = 0
    protocol = internal
    device = /dev/sci1
    detect = cd
    group = 1
    caid = 090F
    emmcache = 1,3,15
    audisabled = 0
    mhz = 357
    cardmhz = 357
    ratelimitecm = 4
    ratelimittime = 9000
    ecmunique = 1
    srvidholdtime = 2000
    cooldown = 30,600

    [reader]
    label = Extern_Viasat_newcs
    enable = 1
    protocol = newcamd
    key = 0102030405060708091011121314
    device = 192.168.0.2,10001
    account = user,password
    group = 1
    fallback = 1

    Oscam.user


    [account]
    user = dvbapiau
    pwd =
    disabled = 0
    group = 1
    au = 1

    [account]
    user = db800
    pwd = db800psw
    disabled = 0
    group = 1
    au = 1

  4. #4
    New Member
    Join Date
    03-02-2016
    Posts
    3
    Uploads
    0

    Re: How to OSCam and dvbapi on Dreambox / VU+

    I found the problem.

    One have to set

    user = user1
    password = password

    in Oscam.server

    Older manuals refer that it works with

    account = user1,password

    but id did not work

    Brg
    Muppix

Similar Threads

  1. vdr-dvbapi + oscam
    By turbopower in forum PC приемници и карти
    Replies: 0
    Last Post: 09-06-2012, 13:11:41
  2. Oscam v8a DVBAPI setup for 09cd card - EDG Nemesis E2
    By *Besmiri* in forum OSCam Plugins
    Replies: 0
    Last Post: 21-12-2011, 01:03:18
  3. OSCAM mit DVBAPI (sh4) - E2
    By OVES12 in forum OSCam Binaries
    Replies: 75
    Last Post: 01-12-2011, 17:11:40
  4. oscam-DREAMBOX
    By mile kristo in forum Dreambox Software and Tools
    Replies: 5
    Last Post: 21-07-2011, 18:46:03
  5. Dreambox 500 Beckup Oscam+CCcam
    By wahid in forum Dreambox DM 500 / DM 500+ Images
    Replies: 0
    Last Post: 26-11-2009, 14:37:34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •