Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: Малко помощ за Vu+ Duo.

  1. #1
    Member
    Join Date
    12-08-2006
    Location
    Ирландия
    Posts
    82
    Uploads
    1

    Малко помощ за Vu+ Duo.

    Привет на всички.
    Днес инсталирах OpenPli 3.0 на Vu+ Duo и сега се помъчих да инсталирам Mgcamd и Softcam за Булсат ама нещо не се получава.
    Използвах enigma2-plugin-softcams-mgcamd_1.35a-r5_mipsel и успях да го инсталирам без проблем, след това понеже нямах Softcam.Key файл в бокса копирах един от ДМ500(Е1) и го поставих в usr/keys където са и следните файлове: ignore.list mg_cfg peer.cfg priority.list replace.list
    Като приоритетен Softcam/CI имам Mgcamd и разбира се работещи ключове за Ирдето във формат Bulsat 39.0E

    I 0604 02 EAE5561133B2E62C83EF54BF3D0AF14B.
    Пробвах и телнет с Putty.Прилагам лога.


    openpli 3.0 vuduo




    vuduo login: root
    root@vuduo:~# cd /usr/bin
    root@vuduo:/usr/bin# ls
    [ gst-launch seq
    [[ gst-launch-0.10 setkeycodes
    alsamixer gst-typefind setsid
    ar gst-typefind-0.10 sg
    awk gst-xmlinspect sha1sum
    basename gst-xmlinspect-0.10 sha256sum
    bdpoll gst-xmllaunch sha512sum
    bunzip2 gst-xmllaunch-0.10 showiframe
    bzcat head showkey
    chage hotplug_e2_helper smemcap
    cheetah id sort
    cheetah-analyze kbd_mode ssh
    cheetah-compile killall strings
    chfn last su
    chfn.shadow last.sysvinit systool
    chrt lastb tail
    chsh lastlog tap2deb
    chsh.shadow less tap2rpm
    chvt logger tapconvert
    clear logname taskset
    cmp lspci tee
    crontab lsusb telnet
    cut manhole test
    dbclient md5sum time
    dbus-cleanup-sockets mesg timeout
    dbus-daemon mesg.sysvinit top
    dbus-monitor mgcamd tr
    dbus-send mkfifo traceroute
    dbus-uuidgen nc traceroute6
    dc newgrp trial
    deallocvt newgrp.shadow tty
    diff nmeter turnoff_power
    dirname nohup twistd
    dlist_test nslookup uniq
    dos2unix ntfs-3g unix2dos
    du ntfs-3g.probe unxz
    eject ntfs-3g.secaudit unzip
    enigma2 ntfs-3g.usermap update-alternatives
    enigma2.sh od uptime
    env openssl users
    ether-wake openvt utmpdump
    expiry opkg volname
    expr opkg-cl wall
    faillog opkg-key wall.sysvinit
    fgconsole passwd watch
    find passwd.shadow wc
    flock patch wget
    free printf which
    fuser pyhtmlizer who
    get_device python whoami
    get_driver python-config whois
    get_module python2.7 wpa_passphrase
    gpasswd python2.7-config xargs
    grab readlink xml2-config
    groups realpath xmlcatalog
    groups.shadow renice xmllint
    gst-feedback reset xzcat
    gst-feedback-0.10 run-parts yes
    gst-inspect scp
    gst-inspect-0.10 sdparm
    root@vuduo:/usr/bin# mgcamd -dv
    tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
    [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
    [mg] Ecm cache time: 15
    Box type: dbox2
    root@vuduo:/usr/bin# Conax.Key error 2: No such file or directory
    Keys readed
    AutoRoll.Key error 2: No such file or directory
    Conax.Key error 2: No such file or directory
    [mgcam] emm thread started


    незнам дали формата на ключовете е същия като за дм500 или нещо друго съм объркал.
    Ако някой се сеща да сподели.
    Благодаря предварително.

  2. #2
    Member
    Join Date
    12-08-2006
    Location
    Ирландия
    Posts
    82
    Uploads
    1

    Re: Малко помощ за Vu+ Duo.

    Ето го и mg_cfg
    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }


    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }


    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }


    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 01 } 0x12c0


    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }


    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 32 }


    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 }


    # network ecm timeout in seconds
    K: { 02 }


    # newcamd dead routes connect retry, sec
    Q: { 10 }


    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 02 }


    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 }


    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80


    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 00 } 192.168.2.105 514 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }


    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }


    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }


    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }


    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 06 }


    # Mapping 18xx
    # 00 disable mapping
    # 01 map 18xx to 1801
    F: { 00 }

  3. #3
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,515
    Uploads
    113

    Re: Малко помощ за Vu+ Duo.

    Формата е същият, без значение на коя платформа пускаш mgcamd.
    Box type: dbox2
    Това не ти е добре задай

    B: { 00 }

    Най-нови ключове от тази тема http://www.satsupreme.com/showthread...%C2%B0E-Hellas

  4. #4
    Member
    Join Date
    12-08-2006
    Location
    Ирландия
    Posts
    82
    Uploads
    1

    Re: Малко помощ за Vu+ Duo.

    Ох само това да беше проблема...
    Няма значение. Конфига не беше наред а и имаше и специфичен начин при OpenPLi.
    За да си спестя главоболията инсталирах последния VTi имидж и всичко си тръгна без излишни упражнения.

  5. #5
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,515
    Uploads
    113

    Re: Малко помощ за Vu+ Duo.

    Какъв е този начин?

  6. #6
    Member
    Join Date
    12-08-2006
    Location
    Ирландия
    Posts
    82
    Uploads
    1

    Re: Малко помощ за Vu+ Duo.

    Извинявай за късния отговор.
    В OpenPLi липсват едни пакети cript libro или нещо такова които трябва да се инсталират и имаше и нещо друго за което не се сещам в момента.
    Бях притиснат от времето и сложих Vti 4.2 че при него имаше по малко работа за подкарване на Mgcamd.
    В крайна сметка трябваше да сложа едно USB за swap file че останах без място във флаша и така.
    Само мога да кажа че Mgcamd 1.38 не работи много стабилно с този имидж. От време на време не разкодира на определени канали и се оправя с пълен рестарт на приемника.Не съм имал много време да разбера защо.

  7. #7
    Member
    Join Date
    12-08-2006
    Location
    Ирландия
    Posts
    82
    Uploads
    1

    Re: Малко помощ за Vu+ Duo.

    Както писах с този имидж Mgcamd или нещо друго което пречи на кама не ми позволява да гледам Булсат на ему постоянно.
    Приемника е Vu Duo с VTi image 4.2.2 от 06/09/2012 вързан към Diseq ключ с 28.2Е , 39Е, 23.5Е на стационарна антена.
    Mgcamd 1.38 е инсталиран и работи тоест гледам няколко канала на емулатор.
    Проблема е че като превключа от Диема да кажем на друг сателит и канал(BBC) губя емулатора за Булсат като превключа обратно на Диема ми изписва
    no softcam found.

    Къде може да е проблема?
    root@bm750:~# free
    total used free shared buffers
    Mem: 138320 128700 9620 0 196
    Swap: 0 0 0
    Total: 138320 128700 9620
    root@bm750:~#

    това е положението с паметта

  8. #8

    Re: Малко помощ за Vu+ Duo.

    Имаш ли друг cam пуснат на приемника освен MgCam. При мен на openPLI 3.0 MgCamd 1.35a не работи коректно ако е пуснат OSCam като Card Server и за да използвам MgCamd трябва да изключа OSCam-a.

  9. #9
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,515
    Uploads
    113

    Re: Малко помощ за Vu+ Duo.

    Quote Originally Posted by bombibom View Post
    Както писах с този имидж Mgcamd или нещо друго което пречи на кама не ми позволява да гледам Булсат на ему постоянно.
    Приемника е Vu Duo с VTi image 4.2.2 от 06/09/2012 вързан към Diseq ключ с 28.2Е , 39Е, 23.5Е на стационарна антена.
    Mgcamd 1.38 е инсталиран и работи тоест гледам няколко канала на емулатор.
    Проблема е че като превключа от Диема да кажем на друг сателит и канал(BBC) губя емулатора за Булсат като превключа обратно на Диема ми изписва
    no softcam found.

    Къде може да е проблема?
    root@bm750:~# free
    total used free shared buffers
    Mem: 138320 128700 9620 0 196
    Swap: 0 0 0
    Total: 138320 128700 9620
    root@bm750:~#

    това е положението с паметта
    Дай изхода от:
    Code:
    ps -x
    Преди и след превключването.

  10. #10
    Member
    Join Date
    12-08-2006
    Location
    Ирландия
    Posts
    82
    Uploads
    1

    Re: Малко помощ за Vu+ Duo.

    Първо да пусна конфига:
    # EMM messages


    # 00 don't show any EMMs (default)


    # 01 show only valid EMMs


    # 02 show valid and bad EMMs with complete data display


    M: { 02 }






    # ECM messages


    # 00 don't show anything about ecm


    # 01 normal mode, show pids processed, decoded ecm and cw


    # 02 verbose mode, show valid and bad ECMs with data


    C: { 02 }






    # AU


    # 00 disable, no emm pids processed


    # 01 enable, emm pids always processed for soft-au and shared cards


    # 02 auto, emm started only if channel cant be decoded


    # 03 process emm pids for network cards update only


    A: { 01 }






    # key update (sum 01 or 02 with 04)


    # 01 update only new keys, default setting


    # 02 update all keys (used for valid PMK checking)


    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid


    U: { 01 }






    # config files folder (softcam, autoroll, ignore/priority)


    # 00 files in /var/keys
    # 01 files in /tmp


    T: { 00 }






    # network mode, use summ for several clients


    # 00 no network (default)


    # 01 newcamd netclient


    # 02 radegast netclient


    # 04 camd3 netclient


    # 08 gbox netclient


    # 32 cccamd netclient, card list saved as /tmp/cccamd.info


    # (ECM only, supported server version up to 2.1.1, later not work)


    G: { 01 }






    # network retry, use summ for several options


    # 00 disable


    # 01 retry every new ecm


    # 02 try to connect to offline shares every Q: seconds


    # 04 try to detect and fast reconnect to lost (and not used atm) server


    # + XX messages number and YY seconds to reconnect


    # mg will reconnect to server, if no answer to last XX ecm/keepalive or


    # if no answer for last ecm or keepalive sent for YY seconds


    # set to 0 to disable


    N: { 07 } 5 00






    # network ecm timeout in seconds


    K: { 02 }






    # newcamd dead routes connect retry, sec


    Q: { 10 }






    # network shares priority


    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)


    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast


    P: { 00 }






    # on screen display type


    # 00 No OSD (default)


    # 01 neutrino


    # 02 enigma


    # 03 relook


    # + user password for http auth


    O: { 00 } username password






    # on screen display Options, summ of:


    # 01 show emu ecm


    # 02 show network shares messages


    # 04 show decoding failed / fta


    # 08 show emm keys update


    # + web port to use for osd


    S: { 03 } 80






    # Log option, summ of:


    # 00 off


    # 01 network udp log


    # 02 log to console


    # 04 file, appended ! delete it by yourself, before it eat all your hdd


    # + IP udp-port log-file-name


    L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log






    # keep ecm cache, seconds


    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,


    # for openbox/elanvision users with remote shares make sense to set it higher than default value,


    # to not hammer cards while timeshifting or playing crypted recordings.


    E: { 15 }






    # cache option, summ of:


    # 00 Off (default)


    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list


    # 02 Ecm data cache, remember CW for (E:) time


    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart


    H: { 00 }






    # reread files, summ of:


    # 00 No (default)


    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)


    # 02 reread SoftCam.Key on channel change


    # 04 reread SoftCam.Key if file changed


    R: { 04 }






    # debug, summ of


    # 00 off (default)


    # 01 debug ecm


    # 02 debug emm


    # 04 debug network ecm


    # 08 debug network emm


    # 16 debug network login


    # 32 show mem/cpu stats every 1 min


    # 64 add timestamp to log messages


    D: { 11 }






    # box type


    # 00 autodetect, change only if you think wrong type detected.


    # 01 dbox2


    # 02 dreambox


    # 03 triple-dragon


    # 04 relook


    # 05 openbox


    # 06 dreambox/mips


    # 08 stapi/kathrein


    # 09 stapi/ipbox


    # 11 stapi/openbox


    B: { 06 }






    # map all 180x nagra caids to 1801


    # default is 01


    F: { 00 }

Page 1 of 3 123 LastLast

Similar Threads

  1. Малко помощ за CCCAM Log
    By djzmei in forum CCcam
    Replies: 10
    Last Post: 09-09-2012, 23:19:37
  2. Replies: 2
    Last Post: 25-09-2011, 18:24:28
  3. Replies: 0
    Last Post: 30-08-2011, 16:22:03
  4. Кокс сообщений для запуска одиннадцать н
    By erdoganeng in forum Russian / Русский
    Replies: 0
    Last Post: 30-11-2008, 06:30:13

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •