Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: For all CACHE-EX Mode 3 Users (must read!)

  1. #1
    Moderator CapNCooK's Avatar
    Join Date
    10-03-2012
    Location
    Earth
    Posts
    317
    Uploads
    4

    Exclamation For all CACHE-EX Mode 3 Users (must read!)

    Hello!

    It seems that oscam.conf's cacheexwaittime and cachedelay parameters as described in many posts,
    are only valid for CACHE EX MODE 1.

    So..

    To all of you using mode-3, set these parameters to 0 to remove them.

    --


    In stead..

    You must use CSP parameter wait_time to set the wait-time for incoming cache3.
    This value is only used, when a CSP IP and Port are also configured.

    Example config:

    [csp]
    port = 64000
    serverip = 127.0.0.1
    wait_time = 100 #preferred!

    --

    Furthermore, be aware that if you do not set wait_time here, on every cache3 hit, also a normal proxy/cardreader will be used!

    You don't need to have/use CSP at all, it's just to enable the wait_time parameter.

    --

    In other words, without having this part configured, cache3 exchange is useless!

    See here for details: http://www.streamboard.tv/oscam/ticket/2787

    --

    Also be aware that CSP wait_time parameter is global.

    So all readers will be HOLD for xx ms, for cache to come in, if not there, a real request is processed after xx ms.

    --

    I did a request on the Oscam dev-board, to replace this CSP parameter with parameter cacheexwaittime for cache-ex.

    Also, a waittime per CAID:IDENT is requested, to be able to wait longer/shorter for the available encrypting types (SECA/NDS etc).

  2. #2

    Re: For all CACHE-EX Mode 3 Users (must read!)

    If I put the setting like you describe, I immediately get problems. It says "duplicate login" on all users !!!
    So these setting doesn't seem to be right. Build used: 7518

  3. #3

    Re: For all CACHE-EX Mode 3 Users (must read!)

    I can confirm. We need to wait for proper fix from corsair.

  4. #4

    Re: For all CACHE-EX Mode 3 Users (must read!)

    There is also another problem. When you put settings this way with CSP, users only get what's in the cache. If it's not in the cache it does only take a local, but it doesn't take any normal lines that you have in your server. So all reshares you get are not working anymore !

  5. #5
    Moderator CapNCooK's Avatar
    Join Date
    10-03-2012
    Location
    Earth
    Posts
    317
    Uploads
    4

    Re: For all CACHE-EX Mode 3 Users (must read!)

    Hmm,

    Mine does read from both proxies and locals, but i do have the duplicate connection symptom..
    All these problems.. :) Together this makes cache3 unusable isn't it..

    Well, its under attention now, at least.

  6. #6

    Re: For all CACHE-EX Mode 3 Users (must read!)

    I have been at it all night here and found that if you lower the wait_time = 125 to 100 it works fine. Any higher and the local card does not get read ( not sure why!!). My cache 3 now has jumped from 25% ish to 47% ish before reading the local card.

    May I also thank CapNCook for the time and effort he has put into this for the cache 3 users.

  7. #7

    Re: For all CACHE-EX Mode 3 Users (must read!)

    Quote Originally Posted by Qnapper View Post
    I have been at it all night here and found that if you lower the wait_time = 125 to 100 it works fine. Any higher and the local card does not get read ( not sure why!!). My cache 3 now has jumped from 25% ish to 47% ish before reading the local card.

    May I also thank CapNCook for the time and effort he has put into this for the cache 3 users.

    It's working very good also with wait_time = 75. I've tried with 50, but it's seems that it's too short time to read all the cache.
    With wait_time=75 I have the same hit % like with 125 (I have 25 cacheex peers)

  8. #8

    Re: For all CACHE-EX Mode 3 Users (must read!)

    delete post

  9. #9

    Re: For all CACHE-EX Mode 3 Users (must read!)

    great work capNCook .

    cache ex 3 now running 100% as expected .

  10. #10
    Moderator CapNCooK's Avatar
    Join Date
    10-03-2012
    Location
    Earth
    Posts
    317
    Uploads
    4

    Re: For all CACHE-EX Mode 3 Users (must read!)

    Quote Originally Posted by mikie8 View Post
    great work capNCook .

    cache ex 3 now running 100% as expected .
    Yeah right

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Oscam Cache Exchange Mode 3 mostly on 0604
    By thanospe in forum OSCam CACHE-EX Exchange
    Replies: 5
    Last Post: 27-11-2012, 19:17:43
  2. Oscam Cacheex Cache Mode 3 exchange
    By superg1972 in forum OSCam CACHE-EX Exchange
    Replies: 0
    Last Post: 24-09-2012, 11:16:20
  3. Cache-Ex Mode: 3
    By galiano in forum OSCam CACHE-EX Exchange
    Replies: 2
    Last Post: 15-09-2012, 12:23:32
  4. Looking for Oscam Cache-EX mode 3 peers
    By PlatoonRTV in forum OSCam CACHE-EX Exchange
    Replies: 1
    Last Post: 23-08-2012, 18:34:29

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •