How to: VS7000 PVR manual key change
Here are the instructions on how to manually change the keys on your VS7000 PVR.

Important

In the Menu under Installation > Parental control > Menu lock must be on to see the code selection in the Installation menu.

1) Go into the MENU and select INSTALLATION and OK. "Enter pincode ????" box will appear.
2) Enter the master password 3570.
3) You will now see an option at the bottom on the menu below Hard Disk called CODE. Select this and hit OK.
4) Select NAGRA then ok.
5) For DN scroll until you get to the 01 01 00 Nagra 2 screen (there is a 00 01 00 for N1 keys). For BEV use 09 01 00 For N2 keys.

Format will be the following, these are not real keys.

Dish < 01 01 00 >
00 A1 B2 C3 D4 E5 F6 12 13 14 15 16 17 18 19 20 21
08 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00
09 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00
88 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00
89 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00

BEV < 09 01 00 >
08 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00
09 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00
88 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00
89 A1 B2 C3 D4 E5 F6 12 13 00 00 00 00 00 00 00 00

Enter the keys 2 characters at a time then hit the Move Right (Volume >) to move to the next pair.

A = F1 (Red button)
B = F2 (Green button)
C = F3 (Yellow button)
D = F4 (Blue button)
E = Rewind (<<)
F = Slow (|>)
Delete = Guide


Hints
Key 0 aka 00 = rows 08 & 09
Key 1 aka 01 = rows 88 & 89
Do not overwrite the first two characters in the line (08, 09, 88 or 89).
Keys are normally posted as one line with 32 characters or 16 pairs.
Keys are split into two lines 08 & 09 or 88 & 89, 16 characters on each.

Do not change the 00 00 00 00 00 00 00 00 at the end of each row.