Results 1 to 9 of 9

Thread: Doscam for coolstream

  1. #1
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Doscam for coolstream

    doscam for coolstream

    Version History:

    V0.01
    - Cryptoworks EMU
    - Camd3.keys format

    v0.02
    - Nagra Aladin EMU (mapping necessary for KD Free)

    V0.03
    - Seca EMU

    v0.04
    - Via2.6 EMU
    - Via3.0 EMU
    - Conversion to SoftCam.Key
    - No mapping for Digital Cable Free longer necessary

    V0.05
    - Via1 EMU for mezzo-added (0500:007400).
    - Raspberry Fix
    - Other minor bug fixes

    v0.06
    - Fixed ABSat

    v0.07
    - SoftNDS EMU (CAID ViaSat 0x090F)
    - BISS

    v0.08
    - Fixed buildconfig
    - Irdeto2 EMU

    v0.09
    - Irdeto2: fixed caid 0x0603
    - Nagra2: added support for provid 0x7301 (and probably others)
    - Nagra2: fix for big endian systems
    - Possibility to delay added controlword
    -> Example: device = / var / keys / SoftCam.Key, 100
    -> The example above delays the cw for 100ms
    -> Allowed values ​​between 0 and 2000

    v0.09
    - Svn update
    Attached Files Attached Files

  2. #2
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Doscam for coolstream

    V0.09
    - Irdeto2: fixed caid 0x0603
    - Nagra2: added support for provid 0x7301 (and probably others)
    - Nagra2: fix for big endian systems
    - added possibility to delay controlwords
    -> example: device = /var/keys/SoftCam.Key;100
    -> the example above delays the cw for 100ms
    -> allowed values between 0 and 2000

    V0.09
    - svn Update

    V0.10
    - Seca AU (RAI)
    - EMM keys (primary and secondary masterkey) needed in SoftCam.Key, e.g. S 0030 XX YYYYYYYY

    V0.10
    - svn Update



    the minimum config of the emu looks like this
    Source code
    [reader]
    label = emu
    protocol = constcw
    device = /var/keys/SoftCam.Key
    Attached Files Attached Files

  3. #3
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Doscam for coolstream

    V0.10
    - Seca AU (RAI)
    - EMM keys (primary and secondary masterkey) needed in SoftCam.Key, e.g. S 0030 XX YYYYYYYY

    V0.10
    - svn Update

    V0.11
    - DRE Crypt EMU
    -> key format: D AAAABB CCDD XX...
    -> D = DRE Crypt
    -> AAAA = caid
    -> BB = provid
    -> CC = keyset
    -> DD = keyid
    -> XX... = key
    -> example: D 4AE111 3B00 24....CA
    - modified "cccwantemu = 1" for doscam purposes

    the minimum config of the emu looks like this
    Source code
    [reader]
    label = emu
    protocol = constcw
    device = /var/keys/SoftCam.Key
    Attached Files Attached Files

  4. #4
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Doscam for coolstream

    From V0.11 should for connections via cccam ext doscam to be set on the client reader to the following entry ID entries to avoid on the server:
    Attached Files Attached Files

  5. #5
    Moderator
    Join Date
    12-08-2008
    Posts
    1,362
    Uploads
    720

    Re: Doscam for coolstream

    doscam Version 0.12 for Coolstream and RaspberryPi

    DOSCam V0.12 "Fasten Your Seatbelts"
    -> From now on is the DOSCam their own way and not the official SVN builds on the OSCam.

    [general innovations]
    - From now on DOSCam works perfectly without config.
    - Implemented New Car beta tunnel can also tunnel EMMs.
    - WebIf runs by default on port 8080.
    - Monitor service runs by default on port 988
    - There is a user created automatically monitor: monitor, password: monitor
    - Monitor and WebIf are by default only accessible from the LAN.
    - If everything goes customizations with a Minimalconfig [see comments]

    [Dvbapi]
    - Automatic detection Boxtype
    - Newly implemented dvbapi with new request_mode new request_mode = 0 and = 1
    - Request_mode = 1 is the new standard [Exception: dbox2 uses the mode0]
    - Freeze free CAID changes in both modes, when a reader not found or provides a network reader loses the connection.
    - Also Multicrypt channels can be decoded without oscam.dvbapi.
    - New thread Coolapi Channel & Handling
    - EMM on Free2air channels
    - No-create the dvbapi Users longer necessary: it is automatically created with AU rights for all readers
    - The parameter decodeforever was removed. The cam never ceases to decoden.

    [Reader]
    - No definition of internal readers more necessary.
    - AU and emmcache automatically activated.
    - Automatic card detection
    - Automated ins7e11 for videoguard cards
    - Boxid VideoGuard card by default 12345678
    - For the most common Nagra cards no indication of RSA and Boxkey is necessary.

    -> S02/D02 run in encrypted mode. For the Nagra mode (eg D09 mandatory) must be set in oscam.conf following:
    [global]
    lb_auto_betatunnel = 0
    - ORF ICE runs without config in the internal reader by default in encrypted mode.
    - For external users / Sharing: slot1 is in group = 1, Slot 2 is in group = 2

    [EMU]
    - Improved EMU integration
    - No EMU reader is configured, the SoftCam.Key is expected in the standard Configverzeichnis (on the Coolstream: / var / tuxbox / config /) or in the directory that was passed with the-c parameter at startup.
    - Even without config can be further sharen the EMU, it is in group = 64
    - EMU will also be answered beta tunnel requests.

    [Notes]
    - In principle, the creation of the server in oscam.conf and externern users in oscam.users is only necessary when a server operation.
    - In principle, no config is necessary in a client mode, unless you use an external reader, which must be defined in oscam.servers.
    - If everything goes customizations with a Minimalconfig:

    -> Example 1: The user wants to change the port from 8080 to WebIf 3,001th Suffice following config in the oscam.conf:
    [webif]
    httpport = 3001
    -> Example 2: The user wants slot1 "Sky" means:
    [reader]
    label = Sky
    protocol = internal
    device = 0
    group = 1
    -> Example 3: Creating an external reader:
    [reader]
    Label = Extern
    Protocol = sc8in1
    device = /dev/ttyUSB0:6
    Group = 1
    Attached Files Attached Files

  6. #6
    New Member
    Join Date
    07-04-2009
    Location
    Norway
    Posts
    5
    Uploads
    0

    Re: Doscam for coolstream

    Can a binary for doscamV0.12 be used for dreambox?

  7. #7
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Doscam for coolstream

    Added support for Kronos platform: CoolAPI -
    - Video Guard: certain APPs are due to the pairing automatically blocked (untested!)
    Added Viaccess AU (TNTSAT E1 / E2): EMU -
    -> M-Key is required in SoftCam.Key
    -> Example: V 1A D00040 M0 ... 58
    Attached Files Attached Files

  8. #8
    Moderator mile kristo's Avatar
    Join Date
    24-06-2007
    Location
    EU
    Posts
    1,717
    Uploads
    269

    Re: Doscam for coolstream

    some bug fixes (AU G09, V14 Freezer, various little things
    Attached Files Attached Files

  9. #9
    Member
    Join Date
    11-12-2005
    Location
    Bulgaria
    Posts
    48
    Uploads
    1

    Re: Doscam for coolstream

    Can be found somewhere the sourcecode of the public version of doscam?

Similar Threads

  1. Gbox for Coolstream HD
    By aguda in forum Gbox Plugins
    Replies: 1
    Last Post: 12-03-2016, 18:50:00
  2. New Oscam Mod :DOScam - (by depp0ns ) with emu
    By ALFAJAY in forum OSCam Binaries
    Replies: 16
    Last Post: 01-10-2014, 09:22:50
  3. New Coolstream neo twin
    By fushkrujs in forum Receiver-Ecke
    Replies: 0
    Last Post: 30-01-2012, 22:08:06
  4. CoolPicon per Coolstream HD1
    By aguda in forum Coolstream Software and Tools
    Replies: 0
    Last Post: 01-11-2010, 22:51:00
  5. Epg per Coolstream HD
    By aguda in forum Coolstream Software and Tools
    Replies: 0
    Last Post: 01-11-2010, 22:45:48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •