Solution of "Boot" Problem Starsat 2000 HD
Many users of this receiver have faced the Problem of "Boot"
Especially with the"GOODS ARRIVED AFTER FEB 20"
and one of them is the member : "farid01"
who is pretending that we only upload files without helping members
to solve their technical problems !
And Due to his request and after one year of waiting
here is the solution to this problem
So Just Follow the Steps Let's Get Started...
1- Power Off from the back and link your receiver and computer with the RS 232 cable
2- Open the loader putty.exe 0.62
Download it from here :
then Set it as is Shown on the pic below
3- When you press open on the loader
Power on your receiver and you will see a black windows like the one in the Below pic
4- Press Enter On Your Keyboard An d you will Get as Below
5- Now write : "setenv autostart yes" ( separate the words)
Press "Enter" on your Keyborad
6- Now write this : "saveenv" and press Enter
7- Wait till the process completes like the Pic Below
8- Congatulations Now your receiver is ok !
Now download the last version from here
Put is in the USB
power on the receiver wait till Complete
Erase and write process