Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: The Last Drakkar - public beta version

  1. #1

    Embarrassment The Last Drakkar - public beta version

    The fact that tomorrow we have the International Children's Day, The Flying Dutchman Team decided to publish his new program "The Last Drakkar".

    This project started in March 2012. We worked every day after work, during work, at night and in the weekends, we have devoted a lot of time invested , buy all sorts of electronics, card readers, tuners, subscriptions etc.

    Everything is done to make the appropriate tests.

    The program supports coding systems as:

    Seca
    Conax
    Viaccess
    Irdeto
    Cryptoworks
    Nagra
    DGCrypt




    This is the first stage of the project, Beta version!
    When using the program you find any irregularities, errors or have any ideas to improve the work program to be more user friendly, please write here in this topic or to e-mail - thelastdrakkarpublic@gmail.com
    Private mail or my PM is for private/no public things.
    If there are no errors are found, then in July will be released the official version, not beta.



    The Flying Dutchman Team is not responsible for any damage using the program !
    The tool is completely legal !
    It has no features to break any of the coding systems !
    Attached Files Attached Files

  2. #2

    Re: The Last Drakkar - public beta version

    small manual:


    Window:

    - Read
    read info from the card's
    - Extra Info
    it depend of system , more info from the card's
    - Send
    manual send cmd's , direct send etc
    - Calc
    many calculator's hex/dec/bin/date/xor/atr etc etc
    - RSA calc
    rsa calculator
    - EMM/ECM
    info about emm/ecm
    - PreToPost
    converting emm/ecm from pre cam to post cam
    - Invert
    inverting data , cleaning etc
    - Bombing
    send random or not emm/ecm to card's
    - Bin to Txt
    converting emm/ecm from bin file to txt with different header, sorting by header or UA/SA, deduplication , search in file , copy in pre cam & post cam format
    - Brute Force
    play with cmd's
    - Loger
    based on dvbsnoop , for logging emm/ecm
    - LogerHardware
    for logging comunication
    - PayPal
    If you think that we made a good job ... donate is your free choice
    - About
    thx to ...


    btw if someone dont know for what is this ... this tool is a multireader of many code system using only Phoenix

    tested on ..

    Seca:

    4.0
    4.1
    7.0
    7.1
    7.3
    9.0
    9.1
    A.0 (DNASP400 Rev401)
    A.0 (DNASP400 RevI41)
    A.0 (DNASP400 RevI4A)
    A.0 (DNASP402 RevL00)



    Conax:

    cas5
    cas7



    Viaccess:

    v2.3
    v2.4
    v2.5
    v2.6
    v3.0
    v4.0
    v5.0



    Irdeto :

    ACS 1.2
    ACS 1.9
    ACS 3.82
    ACS 3.83
    ACS 3.84
    ACS 4.1
    ACS 5.0
    ACS 6.0


    Irdeto3 & Hybrid:


    ACS 5.0
    ACS 6.0 / CryptoWorks



    CryptoWorks:

    Bios 02v54
    Bios 03v47
    Bios 05v65
    Bios 06vA0



    Nagra:

    DNASP102 Rev105
    DNASP102 Rev107
    DNASP110 RevAC6
    DNASPS01 Dsh606
    DNASPS02 Dsh809
    DNASP142 RevG02
    DNASP142 RevGC5
    DNASP180 Mer000
    DNASP180 MerJ00 (DNASP401 RevJ00)

    Nagra 1 not supported



    DGCrypt
    here is new beta version , there was small bug with Nagra reset card and with Phoenix on rs232

    TheLastDrakkar-beta public2.zip

  3. #3

    new beta 437

    new beta 437

    - added Nagravision precam (prefix 80,81,82) to postcam conversion, should work in Tab-s: Send, Bombing, pretopost, bintotxt

    - added Spanish Language - thx to lamentos@
    Attached Files Attached Files

  4. #4

    Re: The Last Drakkar - public beta version

    v2.0.0.445

    - Added nagra pre to post for prefixes 80,81,82
    - Added Spanish language
    - Added Send (serial,SA) optpion in logger
    - Added send (serial,SA) option in bin to txt
    - Added Custom card filter option on logger in set send(Serial,SA)
    - Added Custom card filter option on bintotxt in set send(Serial,SA)
    - Added support to viaccess cards Emm send in Send option in logger and bintotxt
    - Added check change in tabs Logger and binttotxt in Send option
    - Rewited way how emm was sended to card in logger and bintotxt tab now it's making by the stack
    - Added option to deleay between sending EMMs in bombing tab
    Attached Files Attached Files

  5. #5

    Re: The Last Drakkar - public beta version

    New Beta v2.1.0 build 478


    - Added Linux receiver - Option - as reader (cheange version to 2.1.x.xxx)
    - Added settings for linux E2 recievier: with such options as:
    * Connection options: host, port, login, pass
    * SCI Card reader path
    * Kill process wich can using reader (oscam, cccam, mgcam)
    * Run proccess if killed on disconnect

    - Added remembering settings for linux receiver to settings.ini
    - Added SCI Errors recognition, like tuner not supported, sci bussy etc..
    - Added set paramaters to sci reader depending of Card ATR
    - Added debug comuniaction for sci
    - Added reset button support for sci
    - Added SCI mode - Card Read support for systems:
    * Seca
    * Nagravision
    * Conax
    * Viaccess
    * DGcrypt
    * Irdeto not tested and CryptoWorks partialy

    - Added SCI support for Send tab for systems:
    * Seca
    * Nagravision
    * Conax
    * Viaccess
    * DGcrypt
    * CryptoWorks
    * Irdeto - not tested

    - Added SCI support for tabs Bombing, BruteForce, Logger for following Systems
    * Seca
    * Nagravision
    * Conax
    * Viaccess
    * DGcrypt
    * CryptoWorks
    * Irdeto - not tested



    As you know this is a beta version so there is certainly still a lot of mistakes , but unfortunately tests are needed
    This option aims to use the readers of E2 receivers , for example , reading cards, send logs, autoupdateetc
    It should work on all receivers with E2

    to connect to the card in the receiver select "Enigma2 Linux"
    click the button "Sett." and pops up a window with the settings
    enter the IP address of our receivers and if the rest we changed a password or else , enter correct
    also choose No reader sci0 - upper , sci1 - lower
    select the "Kill process if using reader"
    select the "Run Process killed on disconnect"
    click "Save and Close"
    click "Connect"

    screenE2eng.jpg
    Attached Files Attached Files

  6. #6

    Re: The Last Drakkar - public beta version 498

    The Last Drakkar - beta v2.1.1.498


    - Added option soft dump to logger tab - cheange version to (2.x.1.xxx)
    - Added pidscan for soft dump
    - Added channelNames for soft dump pid scan
    - Added Update type to soft dump pid scan
    - Added dumping soft type 0 from sattelite
    - Added showing procentage of dump
    - Added showing actulal block
    - Added saving complete dumped file to bin on hdd
    - Added saving complete dumped file to txt on hdd
    - Added types of SoftDump in logger tab:
    * Block
    * Block Hard & Slow
    * CA msg
    * CA msg Hard & Slow
    - Added sort of CA Msgs
    - Added stop on repeat racord in CA dump
    - Added Dump again missing blocks in Block softDump option
    - Added Dump form 0 to last block in Block softDump option

    thx to numind@

    - Added added new option in linux receivers conncetion settings "run killed process after connected to reader"
    - Added full support for Read Info in Cryptoworks cards on Linux Enigma2 as reader
    - Added Portugal Brasil language - thx to PicGrabber@
    - Added support to read Irdeto and Irdeto3 hybrid



    screenbrasilsoftdump.jpg


    in The Last Drakkar tool we add option "SoftDump"
    now everybody can catch/logg firmware updates , sended by providers to our receivers

    all stream data are public and The Last Drakkar tool nothing change in side updates software

    dumped files we save only in .bin or .txt files on our PC hdd

    short faq:

    - go to the transponder where provider send updates
    - choose "SoftDump" and click "Get Pids"
    - choose PID what u want to logg , choose where to save and file name and click "start"


    options:

    -Block - normal - wait max 20 sec , if nothing goes then change
    -Block Hard&Slow - wait max 2 min , if nothing goes then change
    -CA - normal - wait max 20 sec , if nothing goes then change
    -CA Hard&Slow - wait max 2 min


    we do not accept any responsibility for the uploading or modifications these firmware !
    Attached Files Attached Files

  7. #7
    Super Moderator zed44's Avatar
    Join Date
    05-12-2006
    Posts
    1,018
    Uploads
    9

    Re: The Last Drakkar - public beta version

    BEWARE !

    the 2 last versions of this tool were infected by trojan and backdoor (seen by Norton and not as a simple false warning or WSreputation threat, but as real Trojan for one and containing a backdoor for the last one).

    so if you want to keep your computer clean, stay away from this tool. besides there are many other tools that do the same thing than this one, for instance SCEMM for updating french seca card.

    regards

  8. #8

    Re: The Last Drakkar - public beta version

    woot ??

    false positive was checked on nod 32 and trendmicro

    btw if u know tools that can do the same , show me

    show me tool who can :
    -brute force irdeto cards
    -brute force irdeto d2 cmds cards with auto crc
    -logger for soft from satelite
    -tool who can read card from receiver reader
    etc etc

    show me

    if u prefer have 15 tools , one reader , one sender etc etc , okey
    here u have everything in one

  9. #9
    Senior Member
    Join Date
    16-10-2005
    Posts
    146
    Uploads
    0

    Re: The Last Drakkar - public beta version

    There is definitely a very nasty virus/trojan in here as reported by Webroot. It attempts to alter system memory and disable firewalls. Watch out :(

  10. #10

    Re: The Last Drakkar - public beta version

    Quote Originally Posted by sega24 View Post
    woot ??

    false positive was checked on nod 32 and trendmicro

    btw if u know tools that can do the same , show me

    show me tool who can :
    -brute force irdeto cards
    -brute force irdeto d2 cmds cards with auto crc
    -logger for soft from satelite
    -tool who can read card from receiver reader
    etc etc

    show me

    if u prefer have 15 tools , one reader , one sender etc etc , okey
    here u have everything in one
    Then try include a NDs card reader, blocker and season logger SD/HD with custom bauds and custom save log txt formats. ;)

Page 1 of 3 123 LastLast

Similar Threads

  1. New iDreamX - version 3 - Public Beta Test
    By fushkrujs in forum Vu+ Software and Tools
    Replies: 0
    Last Post: 12-03-2012, 19:14:50
  2. latest version CCcam-beta
    By coolpics in forum CubeRevo / IPbox Software and Tools
    Replies: 0
    Last Post: 17-06-2011, 21:39:20
  3. MD-Image Beta version 5.42
    By wahid in forum D-box Firmware
    Replies: 0
    Last Post: 08-09-2010, 20:54:20
  4. DragonXV3.20.2 Version Beta
    By totox69 in forum Starsat Software and Tools
    Replies: 0
    Last Post: 05-06-2010, 17:38:20
  5. JNPCam Plugin Version 0.9 Public Beta
    By Sat-TV in forum DVB Plugins
    Replies: 0
    Last Post: 24-04-2005, 04:01:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •