Results 1 to 9 of 9

Thread: M-Vision General Information & settings

  1. #1
    Webmaster Sat-TV's Avatar
    Join Date
    03-03-2005
    Location
    Amsterdam (Netherlands)
    Posts
    3,372
    Uploads
    1,669

    Arrow M-Vision Settings

    Astra-Hotbird settings
    45 east - 43 west settings

  2. #2
    Webmaster Sat-TV's Avatar
    Join Date
    03-03-2005
    Location
    Amsterdam (Netherlands)
    Posts
    3,372
    Uploads
    1,669

    Post M-Vision General Information & settings

    M-Vision

    Location of the Company:
    United Kingdom

    Start of Digital Satellite Receiver Production: 2004
    Type of Manufacturer: Retailer (mainly for UK market)


    Website: http://www.mvisionreceiver.com/

  3. #3
    Senior Member
    Join Date
    13-03-2005
    Posts
    124
    Uploads
    207

    Re: M-Vision General Information

    How to[

    this will tell you how to load software onto the mv useing boxloader

    first of all you need a null modem cable not a siral cable both ends must be female ports not one male one fem useing an adapter this will not work

    first off connect the cable back of the pc download the lastest software which matches you;re reciver.

    you will need winzip or winrar to open these files in most cases now once this is done extract to the destination of choise

    you will also need a loader program which allows you to connect beetween the pc and the box its eaither named boxloader

    now once you have done the same with the loader extracted bla bla bla

    first off your reciver must be pluged in now open box load set the com port to 1 as this is defult if you have more than one com port set to which it is pluged by clicking setup comm now if a message appears saying conection error dont worry this is just crap

    now open the ungrade software section click the file which is .bin extention this is the file which will upgrade the soft ware not the loader file

    and now you should see a bunch of numbers passing by from around 0/500 and something next to this is error 0 if this stays 0 then good lol what am i on

    now go make a cup of tea leave the reciver till is says on the front of it good or bood one or the other once this appears the jobs done the rest is boring its just numbers flashing on the front of the reciver DONT NOT SWITCH OFF OR REMOVE OR TAMPER WITH THIS UNTILL YOU SEE GOOD OR BOOD this is why i say make tea

  4. #4
    Senior Member
    Join Date
    13-03-2005
    Posts
    124
    Uploads
    207

    Re: M-Vision General Information

    Updateing keys

    1 Goto the channel
    2 Press exit and then you get hot key
    3 Press list ok and then you will get a big window
    4 Find the key you want to change
    5 Click list ok
    6 Use the arrow keys around the list ok use the down arrow first
    7 Enter the code
    8 When you are done goto the button OK on the screen and press list ok

    9 Then you will go back too the big window and then press exit and thats it.

    **************************************************
    Updateing the stb with Box loader.

    To update the box, you will need a null cable. Here is how you update.

    1. Plug in the stb and leave in stand by.
    2. But the null cable from the computer to the stb.
    3. Start up box loader.
    4. Click update software
    5. Find the new software you want to send to the stb.
    6. Click on it and then click open.
    7. Then you will see the screen on the computer of the box loader will start moveing, all so on the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as the box needs do do more you will see it count again and at the end you will see good in the window of the stb.

    8. Turn off the stb and but it back on and see what the software it say in the window of the stb and if it say the one you have loaded you are done.
    **************************************************
    Updateing the stb with FCisUtl..

    To update the box, you will need a null cable. Here is how you update.

    1. Plug in the stb and leave in stand by.
    2. But the null cable from the computer to the stb.
    3. Start up FCisUtl..
    4. Click update FCIS fireware
    5. Do you want to connected say YES.
    6. Click change
    7. Find the new software you want to send to the stb.
    8. Click on it and then click open.
    9. Then you will see the screen on the computer of the box loader will start moveing, all so on the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as the box needs do do more you will see it count again and at the end you will see good in the window of the stb.

    10. Turn off the stb and but it back on and see what the software it say in the window of the stb and if it say the one you have loaded you are done.


    **************************************************
    Turn on EMU

    Power it off
    and restart with tv.
    Go to first menu level and key in 9999.
    This is necessary to enable the emu.
    If a smartcard item appears in the first level menu then you are ready to go
    **************************************************
    Turn off EMU

    Go to first menu level and key in 0000.
    And you will see the smart card go from the first menu level
    You might have to press 0 more times than 4 to get it to work.
    **************************************************

    i have robbed this guide from somebody else the one i wrote is not as clear

  5. #5
    New Member
    Join Date
    06-07-2006
    Posts
    4
    Uploads
    0

    Re: M-Vision General Information

    je veus savoir le site pour les soft ware pour fs 1000

  6. #6
    Junior Member
    Join Date
    24-04-2005
    Posts
    13
    Uploads
    0

    Re: M-Vision General Information

    Hello!!
    I can,t find usb option in my receiver after i have updated new s/w with memory stick.please help how can i get bake ,usb option under utility.i hve m-vision 9080 usb recevier.

    with best regards
    trust

  7. #7
    Junior Member
    Join Date
    08-01-2007
    Posts
    10
    Uploads
    0

    Re: M-Vision General Information & settings

    Hi Guys,
    how can i Update my stb with a null modem cable and another stb.
    Any help please.

  8. #8
    VIP Member amar105's Avatar
    Join Date
    03-09-2006
    Posts
    71
    Uploads
    119

    Lightbulb Re: M-Vision General Information & settings

    activat TVM Maroc on Biss
    for mvision
    ECM PID: 0FFF
    12.34.56.00.65.43.21.00

  9. #9

    Re: M-Vision General Information

    Quote Originally Posted by lezwez View Post
    how to[

    this will tell you how to load software onto the mv useing boxloader

    first of all you need a null modem cable not a siral cable both ends must be female ports not one male one fem useing an adapter this will not work

    first off connect the cable back of the pc download the lastest software which matches you;re reciver.

    You will need winzip or winrar to open these files in most cases now once this is done extract to the destination of choise

    you will also need a loader program which allows you to connect beetween the pc and the box its eaither named boxloader

    now once you have done the same with the loader extracted bla bla bla

    first off your reciver must be pluged in now open box load set the com port to 1 as this is defult if you have more than one com port set to which it is pluged by clicking setup comm now if a message appears saying conection error dont worry this is just crap

    now open the ungrade software section click the file which is .bin extention this is the file which will upgrade the soft ware not the loader file

    and now you should see a bunch of numbers passing by from around 0/500 and something next to this is error 0 if this stays 0 then good lol what am i on

    now go make a cup of tea leave the reciver till is says on the front of it good or bood one or the other once this appears the jobs done the rest is boring its just numbers flashing on the front of the reciver dont not switch off or remove or tamper with this untill you see good or bood this is why i say make tea
    very goog massage there, thank you very much we will make a cup of tea whiles waiting

Similar Threads

  1. M Vision - Settings GIOŽGIO Team
    By mikame in forum M-Vision Software and Tools
    Replies: 56
    Last Post: 22-09-2015, 15:18:57
  2. Nokia General Information
    By Sat-TV in forum Nokia
    Replies: 1
    Last Post: 24-04-2008, 01:33:12
  3. Humax General Information
    By Sat-TV in forum Humax Information and Tutorials
    Replies: 2
    Last Post: 30-10-2006, 18:00:45
  4. Dream General Information
    By Sat-TV in forum Dreambox
    Replies: 1
    Last Post: 24-04-2006, 00:42:37
  5. Echostar General Information
    By Sat-TV in forum Echostar
    Replies: 0
    Last Post: 03-07-2005, 06:12:41

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •