Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: triplereader-ubuntu-oscam

  1. #1
    Junior Member
    Join Date
    23-09-2007
    Posts
    10
    Uploads
    0

    triplereader-ubuntu-oscam

    Salve a tutti, sto cercando di far funzionare il triplereader su ubuntu, e c'ero quasi riuscito, dando alle porte usb chmod 777, ed oscam ha letto le due card dandomi gli atr, il problema che al primo riavvio oscam non parte piu' se smargo collegato, mentre se lo scollego oscam parte a dovere.
    suppongo sia un conflitto tra le porte usb ed oscam, ma non riesco a venirne a capo. posto il log di oscam con smargo attaccato:


    NG: oscam.conf line 12 section [dvbapi] is ignored (support not compiled in).
    13:09:50 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9044 (i486-linux-gnu-libusb-pcsc)
    13:09:50 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2662
    reader ins7e parse error, ins7e=00000000000000000000000000000000000000000000 000000 00
    13:09:50 0 s services reloaded: 0 services freed, 14 services loaded, rejected 0
    13:09:50 0 s userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
    13:09:50 0 s signal handling initialized
    13:09:50 0 s 1334 service-id's loaded in 5ms
    13:09:50 0 s 4 provid's loaded
    13:09:50 0 s 1 lengths for caid guessing loaded
    13:09:50 0 s 1211 entries read from oscam.whitelist
    13:09:50 0 s 1 entries read from oscam.cacheex
    13:09:50 0 s newcamd: initialized (fd=4, port=34000)
    13:09:50 0 s -> CAID: 09CD PROVID: 000000
    13:09:50 0 s cccam: initialized (fd=5, port=12100)
    13:09:50 0 s skyitalia [mouse] creating thread for device /dev/ttyUSB0
    13:09:50 0 s Tivusat [mouse] creating thread for device /dev/ttyUSB1
    13:09:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    13:09:50 0 s waiting for local card init
    13:09:50 B7100468 h webif: decompressed 54397 bytes back into 154940 bytes
    13:09:50 B7100468 h HTTP Server running. ip=0.0.0.0 port=8080
    max74@max-HP:/usr/local/bin$


    -e qui si blocca !!!!!!

  2. #2
    ***** oberleutnant maibach's Avatar
    Join Date
    21-01-2006
    Location
    my country
    Posts
    5,249
    Uploads
    39

    Re: triplereader-ubuntu-oscam

    Ciao,hai un accoppiata 3c e osso, meglio ke usi dvbapi pura, fai prima, e cmq la 9cd a riskio in sti giorni

  3. #3
    Junior Member
    Join Date
    23-09-2007
    Posts
    10
    Uploads
    0

    Re: triplereader-ubuntu-oscam

    Grazie per la risposta, ma ho solo l'osso.
    p.s. in che senzo a rischio? so che in questi giorni c' la caccia alle streghe, ma secondo te cosa dovrei fare? non utilizzarla propio?
    p.p.s mi aiuti col mio problema per quanto riguarda le usb su ubuntu?
    grazie

  4. #4
    ***** oberleutnant maibach's Avatar
    Join Date
    21-01-2006
    Location
    my country
    Posts
    5,249
    Uploads
    39

    Re: triplereader-ubuntu-oscam

    13:09:50 0 s cccam: initialized (fd=5, port=12100)
    scusa ma sto log dice ke un 3c inizializzata, posta la oscam config cosi vediamo

  5. #5
    Junior Member
    Join Date
    23-09-2007
    Posts
    10
    Uploads
    0

    Re: triplereader-ubuntu-oscam

    [global]
    logfile = stdout
    fallbacktimeout = 2000
    failbantime = 5
    nice = -1
    maxlogsize = 512
    preferlocalcards = 1

    [dvbapi]
    enabled = 1
    au = 0
    boxtype = pc
    user = dvbapi
    pmt_mode = 0


    [newcamd]
    port = 34000@09CD:000000
    key = 0102030405060708091011121314
    keepalive = 1

    [cccam]
    port = 12100
    nodeid = 1CB32B61105F13FE
    version = 2.1.3
    reshare = 2
    reshare_mode = 0
    stealth = 1


    secondo me quella la ciccia interna dell'osso niente altro, non lo so se va bene cosi' perch ho preso quella che avevo dal dm800,

  6. #6
    ***** oberleutnant maibach's Avatar
    Join Date
    21-01-2006
    Location
    my country
    Posts
    5,249
    Uploads
    39

    Re: triplereader-ubuntu-oscam

    ti manca solo la webinfo >>
    [webif]
    httpport = 8xxx
    httphelplang = it
    httprefresh = 20
    httphideidleclients = 1
    httpallowed = 192.168.1.1-192.168.1.255

  7. #7
    Junior Member
    Join Date
    23-09-2007
    Posts
    10
    Uploads
    0

    Re: triplereader-ubuntu-oscam

    Scusami, quella parte l'ho omessa di proposito, ma c'; il mio problema sta sulle usb.....maledette usb, ora ho visto che ci sono dei drivers che dovrebbero essere aggiornati, FTDI_SIO ma non so come fare; sono certo che il problema sia li

  8. #8

    Re: triplereader-ubuntu-oscam

    Quote Originally Posted by sorpeppo View Post
    Scusami, quella parte l'ho omessa di proposito, ma c'; il mio problema sta sulle usb.....maledette usb, ora ho visto che ci sono dei drivers che dovrebbero essere aggiornati, FTDI_SIO ma non so come fare; sono certo che il problema sia li
    Col permesso di @maibach.
    Solitamente i driver FTDI sono inclusi di base in Ubuntu.
    Quante usb hai? Da terminale posta il log lsusb, cos capiamo meglio...

  9. #9
    Junior Member
    Join Date
    23-09-2007
    Posts
    10
    Uploads
    0

    Re: triplereader-ubuntu-oscam

    max@max74-HP:~$ lsusb
    Bus 002 Device 004: ID 064e:a127 Suyin Corp.
    Bus 002 Device 003: ID 046d:c52e Logitech, Inc.
    Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC
    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    max@max74-HP:~$

    ed anche un estrattto del dmesg relativo al device in oggetto:

    [ 11.023723] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
    [ 11.025860] usbcore: registered new interface driver usbserial
    [ 11.025879] usbcore: registered new interface driver usbserial_generic
    [ 11.025898] usbserial: USB Serial support registered for generic
    [ 11.039435] usbcore: registered new interface driver ftdi_sio
    [ 11.039460] usbserial: USB Serial support registered for FTDI USB Serial Device
    [ 11.039521] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
    [ 11.039567] usb 1-1.2: Detected FT2232C
    [ 11.039570] usb 1-1.2: Number of endpoints 2
    [ 11.039573] usb 1-1.2: Endpoint 1 MaxPacketSize 64
    [ 11.039576] usb 1-1.2: Endpoint 2 MaxPacketSize 64
    [ 11.039579] usb 1-1.2: Setting MaxPacketSize 64
    [ 11.040411] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
    [ 11.040441] ftdi_sio 1-1.2:1.1: FTDI USB Serial Device converter detected
    [ 11.040472] usb 1-1.2: Detected FT2232C
    [ 11.040475] usb 1-1.2: Number of endpoints 2
    [ 11.040479] usb 1-1.2: Endpoint 1 MaxPacketSize 64
    [ 11.040482] usb 1-1.2: Endpoint 2 MaxPacketSize 64
    [ 11.040485] usb 1-1.2: Setting MaxPacketSize 64
    [ 11.041624] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
    [ 11.041644] ftdi_sio 1-1.2:1.2: FTDI USB Serial Device converter detected
    [ 11.041707] usb 1-1.2: Detected FT2232C
    [ 11.041710] usb 1-1.2: Number of endpoints 2
    [ 11.041713] usb 1-1.2: Endpoint 1 MaxPacketSize 64
    [ 11.041717] usb 1-1.2: Endpoint 2 MaxPacketSize 64
    [ 11.041719] usb 1-1.2: Setting MaxPacketSize 64
    [ 11.044575] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB2



    1.732281] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
    [ 1.732290] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 64
    [ 1.732297] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x83 has invalid maxpacket 64
    [ 1.732302] usb 1-1.2: config 1 interface 1 altsetting 0 bulk endpoint 0x4 has invalid maxpacket 64
    [ 1.732308] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x85 has invalid maxpacket 64
    [ 1.732313] usb 1-1.2: config 1 interface 2 altsetting 0 bulk endpoint 0x6 has invalid maxpacket 64
    [ 1.733061] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6011
    [ 1.733067] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 1.733072] usb 1-1.2: Product: Triple Reader+
    [ 1.733077] usb 1-1.2: Manufacturer: Argolis
    [ 1.733081] usb 1-1.2: SerialNumber: 00000689
    [ 1.823655] tsc: Refined TSC clocksource calibration: 2128.239 MHz
    [ 1.839727] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
    [ 1.855844] firewire_core 0000:04:00.0: created device fw0: GUID 00241b007723cd01, S400
    [ 1.935486] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52e
    [ 1.935494] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 1.935500] usb 2-1.1: Product: USB Receiver
    [ 1.935504] usb 2-1.1: Manufacturer: Logitech
    [ 1.945281] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.954735] usbcore: registered new interface driver usbhid
    [ 1.954738] usbhid: USB HID core driver
    [ 1.962567] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5
    [ 1.962707] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
    [ 1.963077] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6
    [ 1.963352] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1

    il dispositivo viene visto correttamente secondo me, per non saper ne leggere ne scrivere sono relativamente certo che il problema sia venuto da li...cio i chmod, per il semplice motivo che successa 2 volte la stessa cosa su due pc diversi.......come ho dato quel comando...ppufff ! di colpo non si avvia piu' l'osso !

  10. #10

    Re: triplereader-ubuntu-oscam

    Vai, vediamo se il modulo inserito nel kernel:

    sudo modprobe ftdi_sio

    Postami il risultato

Page 1 of 2 12 LastLast

Similar Threads

  1. Oscam and cccam in ubuntu
    By totalfree in forum CCcam Software and Tools
    Replies: 0
    Last Post: 15-01-2012, 08:59:48
  2. New oscam ubuntu
    By kazik57 in forum OSCam Tutorials
    Replies: 0
    Last Post: 06-12-2011, 20:27:58
  3. Question Oscam Ubuntu 11.04 x86_64
    By Brainworm in forum General Discussions: Cams
    Replies: 0
    Last Post: 29-08-2011, 14:24:47
  4. Oscam and ubuntu
    By kjonker1 in forum OSCam
    Replies: 0
    Last Post: 30-03-2010, 15:49:00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •