Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Oscam Not Working

  1. #1

    Oscam Not Working

    Hello people. I hope someone can help me here.

    I am trying to set up a Oscam on my Duo2 without success.

    I have used the setting found here as my config file but still no joy:

    http://www.satsupreme.com/showthread...on-Dreambox-VU

    I had a look at the log file and below is the error being reported:

    -------------------------------------------------------------------------------
    >> OSCam << cardserver log switched at Sat Feb 1 02:27:26 2014
    -------------------------------------------------------------------------------
    2014/02/01 02:27:26 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:27:26 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:27:26 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9475 (mipsel-unknown-linux-gnu-libusb)
    2014/02/01 02:28:26 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:28:26 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:29:26 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:29:26 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:30:26 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:30:26 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:31:26 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:31:26 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:32:24 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:32:24 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:33:25 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    2014/02/01 02:33:25 505C60 r my_test [internal] Cannot open device: /dev/sci0
    2014/02/01 02:34:25 505C60 r my_test [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

    "my_test" is the label I had setup. i.e. "label = my_test"

    I am guessing that my ident or caid my be incorrect. What should this normally be? Below is what I have used:

    caid = 0963
    ident = 0963:000000


    Many thanks

  2. #2

    Re: Oscam Not Working

    you how local map?

  3. #3

    Re: Oscam Not Working

    Sorry, I am complete novice here...What is local map?

  4. #4

    Re: Oscam Not Working

    hey,

    seems more that you are running multiple instances that are already using the cardreader. can you verify if cccam or your previous cardsharingsoftware is not running? you can do this in a ssh session by running ps -edf |grep ccccam

  5. #5

    Re: Oscam Not Working

    Quote Originally Posted by gimic View Post
    hey,

    seems more that you are running multiple instances that are already using the cardreader. can you verify if cccam or your previous cardsharingsoftware is not running? you can do this in a ssh session by running ps -edf |grep ccccam
    Thanks for your swift responce.

    You're probably right. I have been trying a lot of setting since the last few hours including a Cccam server.

    I have now wiped the box and starting afresh now.

    Would you know what should be mu CAID and IDENT normally?

    Cheers

  6. #6

    Re: Oscam Not Working

    i have no 0963 card so i don't know the settings for Ident and caid, but i suppose that it would be like you stated in your first post.

  7. #7

    Re: Oscam Not Working

    Quote Originally Posted by gimic View Post
    i have no 0963 card so i don't know the settings for Ident and caid, but i suppose that it would be like you stated in your first post.
    Many thanks mate.

    I have now started from a clean slate and all seems to work fine expect that all paid channels are black. Below is what is in the log file:

    -------------------------------------------------------------------------------
    >> OSCam << cardserver log switched at Sat Feb 1 12:49:50 2014
    -------------------------------------------------------------------------------
    2014/02/01 12:49:50 52A478 r myreadername [videoguard2] localuser emmtype=global, len=122, idx=20, cnt=1: written (25 ms)
    2014/02/01 12:49:50 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9479 (mipsel-unknown-linux-gnu)
    2014/02/01 12:49:50 52F838 c localuser (0963&000000/FFFF/0EEE/7C:CC1FDAA6592DA7093792AC9C256351E8): not found (1 ms) by myreadername

    ###########################################

    More log................


    -------------------------------------------------------------------------------
    >> OSCam << cardserver log switched at Sat Feb 1 12:53:29 2014
    -------------------------------------------------------------------------------
    2014/02/01 12:53:29 52F838 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0963 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0104 VPID 0201
    2014/02/01 12:53:29 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9479 (mipsel-unknown-linux-gnu)
    2014/02/01 12:53:29 52F838 c localuser (0963&000000/FFFF/0EEE/7C:C9ECFD86B3C68E1C0653229389E4A657): not found (1 ms) by myreadername
    2014/02/01 12:53:29 52F838 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
    2014/02/01 12:53:30 52F838 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0963 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0104 VPID 0201
    2014/02/01 12:53:30 52F838 c localuser (0963&000000/FFFF/0EEE/7C:C9ECFD86B3C68E1C0653229389E4A657): not found (1 ms) by myreadername
    2014/02/01 12:53:30 52F838 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
    2014/02/01 12:53:31 52F838 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0963 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0104 VPID 0201
    2014/02/01 12:53:31 52A478 r myreadername [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2014/02/01 12:53:31 52F838 c localuser (0963&000000/FFFF/0EEE/7C:C9ECFD86B3C68E1C0653229389E4A657): not found (93 ms) by myreadername
    2014/02/01 12:53:31 52F838 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
    2014/02/01 12:53:31 52F838 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0963 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0104 VPID 0201
    2014/02/01 12:53:32 52A478 r myreadername [videoguard2] localuser emmtype=global, len=135, idx=117, cnt=1: written (59 ms)
    2014/02/01 12:53:32 52F838 c localuser (0963&000000/FFFF/0EEE/7C:C9ECFD86B3C68E1C0653229389E4A657): not found (1 ms) by myreadername
    2014/02/01 12:53:32 52F838 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
    2014/02/01 12:53:32 52F838 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0963 PROVID 000000 ECMPID 0508 ANY CHID PMTPID 0104 VPID 0201


    Something about not finding stuff

    Cheers

  8. #8

    Re: Oscam Not Working

    Seems there is a problem with the ecm. Only 1.06% is OK the remaining 98.94 is NOK. This is because I am only able to receive just a single paid channel. See attached.
    Attached Images Attached Images

  9. #9
    Super Moderator turbopower's Avatar
    Join Date
    02-07-2011
    Location
    Somewhere between the Streams
    Posts
    3,512
    Uploads
    112

    Re: Oscam Not Working

    Quote Originally Posted by sunday96 View Post
    Seems there is a problem with the ecm. Only 1.06% is OK the remaining 98.94 is NOK. This is because I am only able to receive just a single paid channel. See attached.
    Did you read those threads http://www.satsupreme.com/showthread...-Oscam-Sky-UK? http://www.satsupreme.com/showthread...0-NDS3-boxkey?

  10. #10

    Re: Oscam Not Working

    Thanks mate.

    I will give it a go and report back.

    Cheers

Page 1 of 2 12 LastLast

Similar Threads

  1. any working C+nl working fileor new update
    By maani_ch in forum Gamma Card
    Replies: 1
    Last Post: 26-01-2012, 19:54:54
  2. Replies: 0
    Last Post: 04-03-2011, 12:22:46
  3. Replies: 0
    Last Post: 05-09-2010, 22:53:56
  4. Replies: 1
    Last Post: 20-12-2009, 15:50:40
  5. Oscam Dm800 not working
    By Cdd in forum OSCam
    Replies: 4
    Last Post: 19-12-2009, 22:03:03

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •