Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Loadbalancing and Oscam Config support needed!

  1. #1
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Loadbalancing and Oscam Config support needed!

    Hello

    Could someone take a look at my config:

    [global]
    logfile = /var/log/oscam.log
    fallbacktimeout = 1600
    unlockparental = 1
    nice = -1
    maxlogsize = 100
    waitforcards = 0
    block_same_ip = 0
    block_same_name = 0
    lb_mode = 1
    lb_save = 100
    lb_reopen_seconds = 900
    lb_force_reopen_always = 1
    lb_retrylimit = 800
    lb_savepath = /usr/local/etc/stats


    [cache]


    [cccam]
    port = 13000
    nodeid = EC0C763910151400
    version = 2.3.0
    reshare_mode = 1
    ignorereshare = 1

    [reader]
    label = redlight
    description = Redlight HDTV Elite Fusion / Serial: Reader 250
    protocol = smartreader
    device = 002:004
    smargopatch = 1
    autospeed = 0
    cacheex_allow_filter = 0
    caid = 0500
    boxid = D5235B16
    boxkey =
    detect = cd
    mhz = 534
    cardmhz = 600
    ident = 0500:043800,1F1F1F,1F1F1F
    group = 1
    lb_weight = 300


    [reader]
    label = Server_101
    description = CanalDigitaal
    protocol = cccam
    device =
    user =
    password =
    services = canal_digitaal_nl,!fox_sports_2
    lb_whitelist_services = canal_digitaal_nl
    inactivitytimeout = 30
    group = 2
    blockemm-unknown = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0
    audisabled = 1
    auprovid = 00006A


    [reader]
    label = Server_102
    description = TVVlaanderen, SKY=D, SKY-E, Skylink
    protocol = cccam
    device =
    user =
    password =
    services = mtv_unlimited,sky_link,sky_deutchland,sky_digital_ (uk),tv_vlaanderen
    inactivitytimeout = 30
    group = 3
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0
    audisabled = 1


    [reader]
    label = Server_101x
    description =
    protocol = cccam
    device =
    user =
    password =
    services = canal_digitaal_nl,!fox_sports_2
    lb_whitelist_services = canal_digitaal_nl
    inactivitytimeout = 30
    group = 4
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0
    audisabled = 1
    auprovid = 00006A


    [reader]
    label = Server_102x
    description =
    protocol = cccam
    device =
    user =
    password =
    services = mtv_unlimited,sky_link,sky_deutchland,sky_digital_ (uk),tv_vlaanderen
    lb_whitelist_services = mtv_unlimited,sky_link,sky_deutchland,sky_digital_ (uk),tv_vlaanderen
    inactivitytimeout = 30
    group = 5
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0
    audisabled = 1


    [reader]
    label =
    description =
    protocol = cccam
    device =
    user =
    password =
    services = hd+,canal_digitaal_nl
    inactivitytimeout = 30
    group = 6
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 2
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0


    [
    [reader]
    label = balci1
    description =
    protocol = cccam
    device =
    user =
    password =
    services = canal_digitaal_nl,tv_vlaanderen,digiturk
    lb_whitelist_services = canal_digitaal_nl,tv_vlaanderen,digiturk
    inactivitytimeout = 30
    group = 7
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 3
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 3
    cccreconnect = 0
    auprovid = 0000C0


    [reader]
    label = viasat
    description = Viasat 5F6ACB21 - 0 1600834337 4 / Reader 6DCC92F
    protocol = smartreader
    device = 002:005
    smargopatch = 1
    caid = 093E
    boxid = 0CB666EC
    boxkey =
    detect = cd
    mhz = 534
    cardmhz = 369
    ident = 093E:000000
    group = 8
    emmcache = 1,1,0
    lb_weight = 300


    [reader]
    label = PPaap1
    description = PPaap1
    protocol = cccam
    device =
    user =
    password =
    services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tn k,tnk_-_smart_hd,tnk_hd,orange_polska,cs_link,mtv_unlimit ed,sky_link,sky_italia,canal+_esp,telesat,canalsat ,sky_digital_(uk),hd+,canal_digitaal_nl,tv_vlaande ren,tntsat,austriasat,srg_ssr,orf_digital,digiturk
    inactivitytimeout = 30
    group = 9
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 1
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0


    [reader]
    label = Meesterjan
    description = Meesterjan
    protocol = cccam
    device =
    user =
    password =
    services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tn k,tnk_-_smart_hd,tnk_hd,orange_polska,sky_link,sky_italia ,canal+_esp,telesat,canalsat,sky_digital_(uk),hd+, tntsat,austriasat,srg_ssr,orf_digital,fox_sports_2
    inactivitytimeout = 30
    group = 10
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 1
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0


    [reader]
    label = Meesterjan2
    description = Meesterjan2
    protocol = cccam
    device =
    user =
    password =
    services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tn k,tnk_-_smart_hd,tnk_hd,orange_polska,sky_italia,canal+_e sp,telesat,canalsat,sky_digital_(uk),fox_sports_2
    inactivitytimeout = 30
    group = 5
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 1
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0


    [reader]
    label = PPaap2
    description = PPaap2
    protocol = cccam
    device =
    user =
    password =
    services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tn k,tnk_-_smart_hd,tnk_hd,orange_polska,sky_link,sky_italia ,canal+_esp,telesat,canalsat,sky_digital_(uk),hd+, canal_digitaal_nl,tv_vlaanderen,bis,tntsat,austria sat,srg_ssr,orf_digital,elite_hd_10+,digiturk,fox_ sports_2
    inactivitytimeout = 30
    group = 11
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    cccversion = 2.3.0
    cccmaxhops = 1
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 0





    I want a specific channel to stay on same reader if connection is good. I don't want that Oscam searches for a new reader while the connection is good.

    Any support is appreciated.

  2. #2
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Re: Loadbalancing and Oscam Config support needed!

    anyone to help me? I've massive freezing.

  3. #3
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Re: Loadbalancing and Oscam Config support needed!

    So many users active and no one wants to help me. I thought forums were made to discuss and try to help other people.

  4. #4
    Strict but fair Andrushenka's Avatar
    Join Date
    28-12-2005
    Location
    Heart of Europe
    Posts
    26,486
    Uploads
    106

    Re: Loadbalancing and Oscam Config support needed!

    Quote Originally Posted by SupremeOne View Post
    So many users active and no one wants to help me. I thought forums were made to discuss and try to help other people.
    Yes but forums are not a hotline for emergency. So please wait until someone who may help you has read the post!

  5. #5
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Re: Loadbalancing and Oscam Config support needed!

    Quote Originally Posted by Andrushenka View Post
    Yes but forums are not a hotline for emergency. So please wait until someone who may help you has read the post!
    Ok sorry about this because I'm searching now for weeks for a solution and couldn't find an answer to my question, maybe you can help me ? I'm getting more and more a headache of this.

  6. #6

    Re: Loadbalancing and Oscam Config support needed!

    First of all if you have massive freezing, you don't have good peers, remove the freezing peers and problem solved.
    if that is no option,

    you could try with the CWC cyclecheck
    http://screenpresso.com/=VGGHb

    or increse the weight of the readers that are good.

  7. #7
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Re: Loadbalancing and Oscam Config support needed!

    Quote Originally Posted by gimic View Post
    First of all if you have massive freezing, you don't have good peers, remove the freezing peers and problem solved.
    if that is no option,

    you could try with the CWC cyclecheck
    http://screenpresso.com/=VGGHb

    or increse the weight of the readers that are good.
    I have massive freezing with Digiturk 0D00 caid. For the rest it's ok. Is it good to have loadbalancer enabled with oscam.services.

    Currently I've set lb mode to 10(only logging)

    What does cw cycle exactly could you describe it in a few words. I've updated oscam to the latest version. Also I want to stay on the same reader if the connection is good but Oscam searches for new reader and then I've some glitching with some readers with low ecm. Normally low ecm should be ok.

  8. #8
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Re: Loadbalancing and Oscam Config support needed!

    Is it good to use oscam.services combined with caid and ident? I've a problem using oscam.services. When I enable oscam.services for digiturk I can't open some of the channels.

  9. #9

    Re: Loadbalancing and Oscam Config support needed!

    When the loadbalancer is off then the requests are send to all the readers that you have, that is bad for your peers because of heavy traffic. You should enable loadbalancing and create a service list for each user so you can exclude certain channels from beeing decoded. It takes a lot of work, but if you have only problems with digiturk than you can exclude digiturk from all of the readers that have problems and whitelist it on the readers that you don't have problems with. For cwc cycle i don't know exactly how it works, i guess it has to do with checksum beeing calculated and if not correct it drops the ecm. But don't know if Digiturk works with this.

  10. #10
    Junior Member
    Join Date
    10-02-2015
    Posts
    16
    Uploads
    0

    Re: Loadbalancing and Oscam Config support needed!

    Quote Originally Posted by gimic View Post
    When the loadbalancer is off then the requests are send to all the readers that you have, that is bad for your peers because of heavy traffic. You should enable loadbalancing and create a service list for each user so you can exclude certain channels from beeing decoded. It takes a lot of work, but if you have only problems with digiturk than you can exclude digiturk from all of the readers that have problems and whitelist it on the readers that you don't have problems with. For cwc cycle i don't know exactly how it works, i guess it has to do with checksum beeing calculated and if not correct it drops the ecm. But don't know if Digiturk works with this.
    Thank you very much. So if you look at my situation is it better to use lb mode=1?

    This is currently how my oscam.conf looks like:
    logfile = /var/log/oscam.log
    fallbacktimeout = 1600
    unlockparental = 1
    nice = -1
    maxlogsize = 100
    waitforcards = 0
    block_same_ip = 0
    block_same_name = 0
    lb_mode = 1
    lb_save = 100
    lb_reopen_invalid = 0
    lb_retrylimit = 1200
    lb_savepath = /usr/local/etc/stats

    My readers: I've Redlight Local Card with 4224,4225,364C,000A,35C0,35C1,35C2,35C3,35C4,35C6, 35C7,35C8,0833 as sids but not getting 100% OK the reader is getting NOK from other 0500 caid.

    Reader of Balci is Digiturk, Canal Digitaal and TV Vlaanderen but I've massive freezing with Digiturk and getting only 75% OK
    [reader]
    label = redlight
    description = Redlight HDTV Elite Fusion / Serial: Reader 250
    protocol = smartreader
    device = 002:004
    smargopatch = 1
    autospeed = 0
    caid = 0500
    boxid =
    boxkey =
    detect = cd
    mhz = 534
    cardmhz = 600
    ident = 0500:043800,042800,042700
    group = 1
    lb_weight = 300


    [reader]
    label = Server_101
    description = CanalDigitaal
    protocol = cccam
    device =
    user =
    password =
    services = canal_digitaal,!fox_sport_2
    lb_whitelist_services = canal_digitaal
    inactivitytimeout = 30
    group = 2
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000
    audisabled = 1
    auprovid = 00006A


    [reader]
    label = Server_102
    description = TVVlaanderen, SKY=D, SKY-E, Skylink
    protocol = cccam
    device =
    user =
    password =
    services = tv_vlaanderen,sky_uk,sky_link,sky_deutschland,mtv_
    inactivitytimeout = 30
    group = 3
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000
    audisabled = 1


    [reader]
    label = Server_101x
    description =
    protocol = cccam
    device =
    user =
    password =
    services = canal_digitaal,!fox_sport_2
    lb_whitelist_services = canal_digitaal
    inactivitytimeout = 30
    group = 4
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000
    audisabled = 1
    auprovid = 00006A


    [reader]
    label = Server_102x
    description =
    protocol = cccam
    device =
    user =
    password =
    services = tv_vlaanderen,sky_uk,sky_link,sky_deutschland,mtv_
    inactivitytimeout = 30
    group = 5
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 0
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000
    audisabled = 1


    [reader]
    label = Raymond01
    description =
    protocol = cccam
    device =
    user =
    password =
    services = !digiturk,canal_digitaal,!tv_vlaanderen,!sky_uk,!s ky_link,!sky_deutschland,!sky_deutschland_,!canal+ _spain,hd+,!nc+_poland,!nc+_conax_poland,!nc+_mix_ poland,!polsat,!tnk_poland,!tnk_smart_hd_poland,!t nk_hd_poland,!orange_poland,!mtv_,!sky_italia,!tel esat,!canal_sat_france,!redlight_,!redlight,!fox_s port_2
    lb_whitelist_services = canal_digitaal,hd+
    inactivitytimeout = 30
    group = 6
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 2
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000






    [reader]
    label = balci1
    description =
    protocol = cccam
    device =
    user =
    password =
    inactivitytimeout = 30
    caid = 0100,0D00
    ident = 0100:00006A,00006C;0D00:0000C0
    group = 7
    emmcache = 1,1,0
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 5
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 3
    cccreconnect = 10000


    [reader]
    label = viasat
    description = Viasat 5F6ACB21 - 0 1600834337 4 / Reader 6DCC92F
    protocol = smartreader
    device = 002:005
    smargopatch = 1
    caid = 093E
    boxid =
    boxkey =
    detect = cd
    mhz = 534
    cardmhz = 369
    ident = 093E:000000
    group = 8
    emmcache = 1,1,0
    lb_weight = 300
    dropbadcws = 1


    [reader]
    label = PPaap1
    description = PPaap1
    protocol = cccam
    device =
    user =
    password =
    services = !digiturk,canal_digitaal,tv_vlaanderen,sky_uk,sky_ link,sky_deutschland_,canal+_spain,hd+,nc+_poland, nc+_conax_poland,nc+_mix_poland,polsat,tnk_poland, tnk_smart_hd_poland,tnk_hd_poland,orange_poland,mt v_,sky_italia,telesat,canal_sat_france,!redlight_, !redlight,fox_sport_2
    lb_whitelist_services = fox_sport_2
    inactivitytimeout = 30
    group = 9
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 2
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000






    [reader]
    label = PPaap2
    description = PPaap2
    protocol = cccam
    device =
    user =
    password =
    services = !digiturk,canal_digitaal,tv_vlaanderen,sky_uk,sky_ link,sky_deutschland_,canal+_spain,hd+,nc+_poland, nc+_conax_poland,nc+_mix_poland,polsat,tnk_poland, tnk_smart_hd_poland,tnk_hd_poland,orange_poland,sk y_italia,telesat,canal_sat_france,!redlight_,!redl ight,fox_sport_2
    lb_whitelist_services = fox_sport_2
    inactivitytimeout = 30
    group = 11
    emmcache = 1,1,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    dropbadcws = 1
    cccversion = 2.3.0
    cccmaxhops = 2
    cccmindown = 1
    ccckeepalive = 1
    cccreshare = 1
    cccreconnect = 10000

    As you see I'm currently not using services for Balci and Redlight because the high amount of NOK's.

    When I use for Balci (Digiturk) oscam.services some of the Digiturk channels will not work but using Caid and Ident they will work.

Page 1 of 2 12 LastLast

Similar Threads

  1. New oscam config creator
    By ashley1 in forum Dreambox Software and Tools
    Replies: 0
    Last Post: 02-08-2014, 21:54:22
  2. Oscam Config Creator
    By *Besmiri* in forum OSCam Plugins
    Replies: 0
    Last Post: 10-08-2011, 23:15:21
  3. Tutorial Oscam Files Config
    By magictails in forum OSCam Tutorials
    Replies: 0
    Last Post: 25-02-2011, 11:21:13
  4. Oscam Config Creator
    By aguda in forum Coolstream Software and Tools
    Replies: 1
    Last Post: 24-11-2010, 15:21:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •