Results 1 to 5 of 5

Thread: Jtag sl35 E1

  1. #1

    Jtag sl35 E1

    How do jtag?
    Excuse my English

  2. #2
    VIP Member mici2's Avatar
    Join Date
    16-09-2006
    Location
    croatia
    Posts
    489
    Uploads
    1,661

    Re: Jtag sl35 E1

    JTag-ALI-SL65-35-35s



    ============================
    =========================
    Building a JTAG Interface
    =========================
    1. Look at ALi-6PiN-JTAG.jpg and build it up ;)
    ===============================
    Installing GiveIO on Windows XP
    ===============================
    1. Copy giveio.sys to C:\WINDOWS\system32\drivers
    2. Go to Control Panel, open System and go to the hardware tab.
    3. Click on the Device Manager button. This will open a new window.
    4. In the Device Manager window, click on the View menu and select
    "Show hidden devices." This will reveal a Non-Plug and Play Drivers icon
    in the file tree.
    5. Expand the Non-Plug and Play Drivers tree.
    6. Find and right click giveio and select Properties from the popup menu.
    This will bring up a window of the giveio Properties.
    7. In the Properties window, select the Driver tab.
    8. Select Automatic from the dropdown box for the type and Start the Driver!

    ================================
    Flashing/Backing UP your SL65/35
    ================================
    1. Plugin your JTag Connector! Set Jumper on the board to 1/2!
    2. Flashing your Box: Go to SL65-35ALi and execute flash-sl65-35.bat and wait for a long time .....
    Backing UP your Box: Go to SL65-35ALi and execute backup-sl65-35.bat and wait a little....
    3. When everything is done, set Jumper on the board to 2/3 and reboot your box!
    4. Enjoy your restored/backup Box!
    ================================
    Flashing/Backing UP your SL35s
    ================================
    1. Plugin your JTag Connector! Set Jumper on the board to 1/2!
    2. Flashing your Box: Go to SL35S and execute flash-sl35s.bat and wait for a long time .....
    Backing UP your Box: Go to SL35S and execute backup-sl35s.bat and wait a little....
    3. When everything is done, set Jumper on the board to 2/3 and reboot your box!
    4. Enjoy your restored/backup Box!

    =====
    NOTES
    =====
    When your box is flashed about 50% you can cancel the flash and the RS232 port will work!
    Flashing your box will take a lot of time ....... 50% needed me ~ 12 hours!

  3. #3

    Re: Jtag sl35 E1

    Thanks mici2!

  4. #4

    Re: Jtag sl35 E1

    as a new user that has an sl65 what does jtag and flashing give you. thanks

  5. #5

    Re: Jtag sl35 E1

    Quote Originally Posted by kinvara64 View Post
    as a new user that has an sl65 what does jtag and flashing give you. thanks

    A Jtag is a lead that is used to flash a device chip in a receiver when the normal method don't work due to incorrect flashing of a modified firmware release, which is used to alter provider keys to receive extra channels.

    Hope this helps.

Similar Threads

  1. Comag SL35 (B1) / wrong software
    By danalex in forum Comag
    Replies: 1
    Last Post: 21-04-2009, 20:00:25
  2. AU for Comag SL35-E1 Chip !
    By Trinity in forum Comag Software and Tools
    Replies: 9
    Last Post: 15-10-2008, 13:23:20
  3. Comag sl35 fta che ne pensate ?
    By skado in forum Italian / Italiano
    Replies: 13
    Last Post: 14-02-2008, 23:14:42
  4. comag sl35 scatolo giallo/arancione
    By fiocca in forum Italian / Italiano
    Replies: 5
    Last Post: 14-12-2007, 20:22:20

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •