Results 1 to 6 of 6

Thread: TPS AU est down avec mgcamd 1.29a

  1. #1
    Junior Member
    Join Date
    14-04-2006
    Posts
    18
    Uploads
    1

    Thumbs down TPS AU est down avec mgcamd 1.29a

    Salut,
    Depuis hier, TPS AU avec mgcamd sur dreambox est down.
    voici le log :
    [mg0] network can't decode
    [mg0] pid 0x0105 failed to decode.
    [mgcamd] received complete OpenTV module
    [mgcamd] processing TPS AU data...
    [mgcamd] couldn't locate all pointers in data section.
    [mg0] No viaccess key(s) found for id 20010 keynr 08
    [mg0] network can't decode
    [mg0] pid 0x010F failed to decode.
    [mg0] RSA keys not found for id 84
    [mg0] network can't decode
    [mg0] pid 0x0107 failed to decode.
    [mgcamd] emm started
    *EMM: CaID: 0x0500 -> CaPID: 0x0032 ProvID: 007C00
    EMM: CaID: 0x0500 -> CaPID: 0x0032 ProvID: 020000
    EMM: CaID: 0x0500 -> CaPID: 0x0032 ProvID: 022600
    EMM: CaID: 0x0500 -> CaPID: 0x0032 ProvID: 022610
    *EMM: CaID: 0x0500 -> CaPID: 0x0033 ProvID: 008100
    *EMM: CaID: 0x0500 -> CaPID: 0x0034 ProvID: 007C00
    EMM: CaID: 0x0500 -> CaPID: 0x0034 ProvID: 020000
    EMM: CaID: 0x0500 -> CaPID: 0x0034 ProvID: 022600
    EMM: CaID: 0x0500 -> CaPID: 0x0034 ProvID: 022610
    EMM: CaID: 0x0500 -> CaPID: 0x0035 ProvID: 015000
    EMM: CaID: 0x0500 -> CaPID: 0x0035 ProvID: 020000
    EMM: CaID: 0x0500 -> CaPID: 0x0035 ProvID: 020010
    [mg0] RSA keys not found for id 84
    [mg0] RSA keys not found for id 84
    [mg0] RSA keys not found for id 84
    [mg0] RSA keys not found for id 84
    [mg0] RSA keys not found for id 84
    [mg0] RSA keys not found for id 84
    [mgcamd] Trying to update tps keys...
    [mgcamd] getting TPS AU data...
    [mgcamd] Tps update failed: no data.
    [mgcamd] Trying to update tps keys...
    [mgcamd] getting TPS AU data...
    [mgcamd] received complete OpenTV module
    [mgcamd] processing TPS AU data...
    [mgcamd] couldn't locate all pointers in data section.
    [mg0] RSA keys not found for id 84
    [mg0] RSA keys not found for id 84
    Quel emu marche correctement avec TPS pour en ce moment?

    Merci

  2. #2

    Re: TPS AU est down avec mgcamd 1.29a

    Salut,

    peux-tu me dire comment tu obtiens le fichier de log sur mgcamd ?
    Je n'ai pas reussi a faire de log sur la dreambox.
    Quels sont les parametres a mettre dans le fichier /var/keys/mg_cfg ?
    Peux-tu m'envoyer ton fichier en PM. Merci.

    Ce matin j'ai chargé CCcam v2.0.8. Ca fonctionne sur dreambox.
    Bon visionnage.

  3. #3
    Junior Member
    Join Date
    14-04-2006
    Posts
    18
    Uploads
    1

    Re: TPS AU est down avec mgcamd 1.29a

    Merci pour ta reponse coco51,

    Voici mon mg_cfg:
    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }

    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 02 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    U: { 05 }

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 01 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 05 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 00 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 00 }
    Pour obtenir les log tu fais :
    sur ton pc : memu demarrer -> executer -> cmd -> tu tapes telnet [adresse ip de ta dreambox] -> tu te loges (login et pass) -> mgcamd_1.29
    les log vont apparaitre...

  4. #4
    Senior Member
    Join Date
    21-04-2005
    Posts
    110
    Uploads
    0

    Re: TPS AU est down avec mgcamd 1.29a

    Idem ici en mgcamd 1.29 avec gemini en dream 7000 nada en tippisss
    malgré mise a jour des cles via ftp. ya une soluce?

  5. #5
    Junior Member
    Join Date
    14-04-2006
    Posts
    18
    Uploads
    1

    Re: TPS AU est down avec mgcamd 1.29a

    Telecharge et installe CCcam 2.0.8 (avec le blue panel) -> go ushuaia -> attend 1 min -> Tipis OK
    CCcam marche avec les mêmes clés que mgcamd.

    Voila.

  6. #6
    Senior Member
    Join Date
    21-04-2005
    Posts
    110
    Uploads
    0

    Re: TPS AU est down avec mgcamd 1.29a

    ok merci de ton aide faut que kje le passe par ftp car en direct par internet sur la dream ca me dit pas assez de memoire grrrrrrrrr


    je teste donc

Similar Threads

  1. mgcamd v1.31
    By kushtrim2000 in forum Dreambox
    Replies: 1
    Last Post: 31-10-2008, 03:31:25
  2. Replies: 2
    Last Post: 21-07-2008, 12:38:42
  3. TPS avec mgCamd 1.28
    By Oratorio in forum French / Français
    Replies: 4
    Last Post: 25-04-2008, 07:26:21
  4. tps with mgcamd
    By goldencoin5 in forum Dreambox
    Replies: 12
    Last Post: 18-09-2007, 19:03:46
  5. ?? MGCamd 1.18
    By audi4611 in forum Dreambox
    Replies: 1
    Last Post: 18-01-2007, 17:24:28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •