Results 1 to 4 of 4

Thread: Botech Tools

  1. #1
    Banned Satty's Avatar
    Join Date
    08-04-2005
    Location
    FunFiles City
    Posts
    918
    Uploads
    111

    Thumbs up Botech Tools

    Here you can find and place all the
    Botech Tools.


    Have fun!

    Satty,

    FunFiles Satellite Team.

  2. #2
    The Manager urmans's Avatar
    Join Date
    01-03-2005
    Posts
    1,596
    Uploads
    583

    Botech Loader

    Botech loader how to:

    Loading of new software from a computer - replica 6000,9000,9500
    **************************************************
    Charging is as follows:

    1. In card slot card at no charge / models for IRD / CRT and CI /; receiver is not connected to e TV or satellite dish by the converter.

    2. Include cross cable RS232, which binds to the receiver via RS232 port / the picture below position 8 / and the other end of the cable connects to your computer.

    3. The program starts charging you've already downloaded from -, works in the box above FIRMWARE BROWSE located by loading the file with extension. BIN
    / Example which seems so: caXXXX_384s_cpa_x_xl_060529.bin - where XXXX e model of receiver 9000, or 9500.10 000 etc /
    After we have selected and attached the relevant files to include recivers electrical networks, ie to 220 V and press DOWNLOAD starts charging itself and during this time is not handled by the receiver to finish loading before - it is about 2-3 minutes. After you finish writing DOWNLOAD IS SUCCESSFUL, ie loading was successful.

    AFTER THIS ......
    1. Receiver back to factory settings / ONLY IN NEW
    USED receivers, which are loaded with new software / menu
    Configuration-Delete date-PIN 0000-Defaults-OK button - go
    Window Warning! . - Click on OK button - Exits windows INFO
    labeled Preserve channel data? 1.Yes 2.No-Click on button 1 on remote
    and wait until the save settings. Then again Configurations menu-delete-date-PIN 0000-Defaults-OK button - go box Warning! . - Click on OK button - Exits windows INFO
    labeled Preserve channel data? 1.Yes 2.No-Now press button 2 on the RCU
    and wait until the save settings. going out with button EXIT.
    2. From the Menu button and go on heading Languages and the English position is pressed the red button and the numbers 2528 and are displayed Emulation / line 5 / against should write Enable, Disable if you write OK button is pressed select Enable and press 9999 emulator and go to Table all codes for Viaccess, Nagra Vision, Irdeto / Beta, Cryptoworks, Seca. At the bottom of the screen the emulator table has four colored buttons, press the blue button on the remote to activate the new key loaded with new software.
    3. Press Menu button and go on heading Languages and the English position is pressed the red button and the numbers 2528 and appeared on 5 and 6-row and, necessarily, 5 and 6 line must write Enable to accept commands from the satellite, if written Disable button is pressed OK and choose Enable
    4. To activate the card receiver in 9500 - From Menu - IS-IS status - press OK button. You receive a spreadsheet containing information are modules and Smart Card and the operation mode of the Smart Card - Transport Stream information on the smart card. If the regime of the map is Chanell is currently scrambled press the OK button on the remote and wait to become Chanell is currently DE - scrambled. EXIT button to exit
    ! To work with the card receiver, the signal quality should be 80% or 80%!
    * If you do not know what you are doing and how to do it better not do it!
    * For possible problems or damage during loading software company is not responsible!
    * Factory Code 0 0 0 0 / four zeros /!
    * Universal Code 1 0 0 4

    Attached Files Attached Files

  3. #3
    The Manager urmans's Avatar
    Join Date
    01-03-2005
    Posts
    1,596
    Uploads
    583

    Re: Botech Loader

    All Botech Loader

    Botech Master Code:
    Botech 2000-2001 CI: 4200
    Botech 2006 series: 1250
    Botech 9000 series: 1004
    Botech 10000 VACI: 5001
    Botech 5500-6000-9000:1004
    Botech 7100: 36852
    Botech 7000: 9876
    Botech 2006: 1250


    Simple tutorial:
    Botech 10000
    Menu key to enter the unit to active emu
    While the control dial on the 2004 System settings menu.
    KEY to enter the menu in the System Settings menu, while the control dial on the 2003.


    Botech 5500-6000-9000 Series
    To the active form of the devices and code emu
    Language Selection Menu + Profiles + + Red (LANG) key and the 2528
    Emu devices (key) to enter the section
    Language Selection Menu + Profiles + +9999


    Botech for 7100 Series
    To activate the device emu
    Press 7799 press Menu code is added to the Edit Menu.
    by pressing menu the arrow key pointing to the regulatory code is entered.


    Botech for 7000 Series
    Master code: 9876
    To activate the device emu
    Menu +0000 zero press.screen Enable appear on the bottom left corner of the patch.
    Key to enter Menu
    Edit Menu + Program Settings + Code + arrow


    Botech 2006 Series
    to active emu
    Menu +7799 press. Device Key Code is added to the menu.
    Menu key to enter the key code press the arrow key point

    Attached Files Attached Files

  4. #4

    Re: Botech Tools

    hi
    i need help about remote control of botech BC9700 xusb
    i lost it and i never found the same here ,i am looking for another adaptable remote control

    thank's

Similar Threads

  1. Botech Firmware
    By Trinity in forum Botech Firmware
    Replies: 18
    Last Post: 10-11-2017, 20:14:20
  2. Botech Emulator Keys
    By Trinity in forum Botech Firmware
    Replies: 314
    Last Post: 25-12-2011, 21:13:49
  3. New BOTECH Flash Dump
    By urmans in forum Botech Software and Tools
    Replies: 2
    Last Post: 28-10-2010, 01:43:26
  4. Update Botech Keys
    By <warrior> in forum Botech Firmware
    Replies: 10
    Last Post: 24-06-2010, 19:00:21
  5. Ndihme Per Botech 9500 irci
    By durresi in forum Albanian / Shqip
    Replies: 6
    Last Post: 04-06-2009, 11:55:25

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •