Page 1 of 6 123 ... LastLast
Results 1 to 10 of 51

Thread: What do I need to update my M2 Card?

  1. #1
    New Member
    Join Date
    17-03-2008
    Posts
    2
    Uploads
    0

    Question What do I need to update my M2 Card?

    hi
    if i buy the M2plus card what else do i need to update it
    do i also have to buy some sort of programmer to update
    and will it work in the hivion HD9090x ultima...???

  2. #2
    Senior Member
    Join Date
    17-12-2005
    Posts
    168
    Uploads
    0

    Re: M2 what else do i need

    You need either Cas3 or some Phoenix programmer (set at 3.57 MHz and Phoenix), like Infinity USB Phoenix. The card will not work in the receiver´s card slot. You need a Conax or a Dragon cam.

  3. #3
    Junior Member
    Join Date
    21-10-2005
    Posts
    20
    Uploads
    0

    Re: M2 what else do i need

    i have problems with the programming of m2 plus card too. i have cas3+ programmer and phoenix sc master (blue) programmer.


    at both it comes always the error message: "unable to restore os, check your card"


    whats wrong??

  4. #4
    Junior Member
    Join Date
    21-10-2005
    Posts
    20
    Uploads
    0

    Re: M2 what else do i need

    or i need a other programmer???

  5. #5
    New Member
    Join Date
    15-08-2008
    Posts
    3
    Uploads
    0

    Re: M2 what else do i need

    iv had the same problem, i just increased the latency and tied again, untill it worked.

    iv also heard of people's card suddenly died.

  6. #6
    Junior Member
    Join Date
    21-10-2005
    Posts
    20
    Uploads
    0

    Re: M2 what else do i need

    which latency you mean? the delay?? and which programmer do you use?


  7. #7
    Junior Member
    Join Date
    22-02-2007
    Posts
    24
    Uploads
    0

    Re: M2 what else do i need

    Phoenix programmer (set at 3.57 MHz and Phoenix) like the old cards (mm2 )

  8. #8
    Junior Member
    Join Date
    21-10-2005
    Posts
    20
    Uploads
    0

    Re: M2 what else do i need

    Quote Originally Posted by jh_the_joker View Post
    Phoenix programmer (set at 3.57 MHz and Phoenix) like the old cards (mm2 )
    so i have done it many times...but it not possible..always the error message "unable to restore..."

  9. #9
    Junior Member
    Join Date
    27-04-2007
    Posts
    10
    Uploads
    0

    Question Re: M2 what else do i need

    Quote Originally Posted by verona View Post
    You need either Cas3 or some Phoenix programmer (set at 3.57 MHz and Phoenix), like Infinity USB Phoenix. The card will not work in the receiver´s card slot. You need a Conax or a Dragon cam.
    i loaded the latest file (digitalb) and i see the card in the dreambox and there are comming ecm in but after 2 hours, still no picture..

    do i have to do something in cccam or newcs? i use a dm7020Si and use it in internal cardslot and as EMU i have CCcam 2.0.9/NewCS 1.60

    thanks for any advice.

    regards

    keydember

  10. #10
    Junior Member
    Join Date
    21-10-2005
    Posts
    20
    Uploads
    0

    Re: M2 what else do i need

    Quote Originally Posted by keydember View Post
    i loaded the latest file (digitalb) and i see the card in the dreambox and there are comming ecm in but after 2 hours, still no picture..

    do i have to do something in cccam or newcs? i use a dm7020Si and use it in internal cardslot and as EMU i have CCcam 2.0.9/NewCS 1.60

    thanks for any advice.

    regards

    keydember
    can you write it how you loaded the m2plus card??

Page 1 of 6 123 ... LastLast

Similar Threads

  1. new update omnia card
    By zorrosat in forum Millennium Card
    Replies: 18
    Last Post: 17-02-2010, 13:24:36
  2. Question update gamma card
    By apolo6 in forum Gamma Card
    Replies: 10
    Last Post: 30-07-2009, 16:43:56
  3. Update update gamma card all ok
    By evagelos1968 in forum Greek / Ελληνικά
    Replies: 5
    Last Post: 25-02-2009, 20:41:18
  4. Q about the Abra Card update
    By Zavain in forum Starsat
    Replies: 1
    Last Post: 05-12-2008, 20:48:07

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •