Results 1 to 3 of 3

Thread: D9223

  1. #1
    VIP Member kolorado's Avatar
    Join Date


    D9223 PowerVu Retune Instructions for the Multiplex Procedure

    How to Retune your PowerVu D9223 Receiver for the new multiplex

    First perform a factory reset. This process uses the front panel display.
    Press the ALT once to change from normal receiver operation to ALT Mode. The ALT light flashes off and on continuously.
    Press the CHAN and CHAN buttons simultaneously. The front panel displays, “do?”.
    Press the YES button to initiate the Factory Reset (pressing any other key aborts the action).
    Once initiated, a Factory Reset CAN NOT be interrupted or reversed. The front panel will display, “CLr” for several seconds, then it will display, “InIt” for several more, then go black, then display four dashes - - - - and finally display a single blinking dot. The Factory Reset is now complete. Press the STANDBY button and the front panel will display a zero.
    Now you may proceed with programming the receiver. This process uses menus you will not see from the front panel. Press the buttons EXACTLY as directed. If you make a mistake, press “VIEW” and start back at this point.
    Press the “MENU” button, then the number 2 then the number 9.
    Press the “NEXT” button.
    Enter the numbers, 1 0 9 3 5 0
    Press the “NEXT” button.
    Press the CHAN button TWICE
    Press the “NEXT” button.
    Enter the numbers, 1 3 2 5 0
    Press the “YES” button. Wait 5 seconds
    Press the “VIEW” button. Wait 5 seconds
    Press the CHAN button ONCE
    You should now see a number 1 in the display window, the signal light should come on, and ARCS should now be playing out your receiver.

  2. #2

    Re: D9223

    exactly what i have been looking for! thanks alot m8.

  3. #3
    New Member
    Join Date

    Re: D9223

    what news about powervu?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts