Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: how to setup cccam.cfg for cardsharing

  1. #1

    Lightbulb how to setup cccam.cfg for cardsharing

    Howto CCcam Sharen

    I found this on a website and could be nice to share this with others, please correct me if i'm wrong and any other sugestions or tips would benice.

    translated verion from dutch to english
    #################
    sharing howto cccam
    To start with you need to open port 12000 with portforwarding in your router(hub) to your dreambox or any other port (you can change this in your cfg file).
    Make sure your cccam.cfg has the correct attribute settings , 644
    To be able to share you need on both parties a friend (F) line in cccam.cfg with username password for you friend.
    You can also adjust these F lines in a way to set the default card only one card or mulitipal cards witch you want to share with your friend.
    And how far you can reshare the card(s) with others, on whitch time of the day or filter it on ip numbers.
    These are optional settings.
    A full F line could look like this:

    F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df } { 12:00-17:00, 19:00-20:00 } ip

    ############################

    F: user4 pass4
    Put here the username and password for your friend, you decide what it wil be

    ############################
    5 0 1

    # the 5
    Means that your friend gets all cards till max 5 hops away from your location.
    You can out this lower, putting this higher usaly has no use deu to the distance (freezing images on dm, to far away to retreive the card keys)

    # the 0
    Here yo can adjust if your friend is allowed to use your emu's settings to watch tv instead using your local card(s) or a share.

    # the 1
    With this you can set if you want to receive your friends card(s) updates.
    Usaly this is on 0, 0 is off and 1 is on, most people have it on 0 (off)

    ############################

    { 0:0:3, 0100:000080:1 }
    { 0100:000080:15df }

    Fill it in exacly as it says with the accolades and spaces, otherwise it wil not work.

    # the 0:0:3

    0:0 means you share all cards, the 3 means distance max reshare 3 hops.
    Means you can recieve (hop1) and you can reshare it to your friend (hop2) and your friend can reshare this with his friend (hop3).
    But on (hop3) this wil stop so the friend of your friend cannot reshare it with others.
    example
    user1(you) user2(friend) user3(friend of friend) end
    1 2 3

    # 0100:000080:1

    Here you can set that some one can recive your card keys but cannot reshare it with others.

    0100:000080 is the provider you want to limit the share.
    the :1 means 1 hop so only he can use it, put this on 0 and he wil not receive anything
    If you want that your friend is not allowed to watch a specific channel.
    Then you put in a line with the channels id

    0100:000080:15df

    :15df is the channels id

    { 12:00-17:00, 19:00-20:00 }

    only between these ours he has access so between 12:00 till 17:00 and 19:00 and 20:00.

    # ip

    if you know your friend ip adress, you can oout it at the back of the line.
    Just to make sure that only he is using it under his account(sort of ip filter).
    Normaly a line looking like this should to the trick

    F: user4 pass4 5 0 0 { 0:0:3 }

    ############################
    The C: line

    With this line you connect to your friend.
    To be able to connect to your friend, your friend needs to put in a F: line so you can have a user name and pasword.
    A basic C could look like this:

    C: someserver.somedomain 12000 user1 pass1

    somerserver.somedomain can be a dns name or IP adres of your friend

    12000

    This is the port where you cccam connects to

    user1/pass1 is your login name and password on your friends machine

    So for example your friends ip adress is 81.23.45.67 and has a F line looking like this:
    F: john01 john20 5 0 0 { 0:0:3 }

    then your C line should look like this:
    C: 81.23.45.67 12000 john01 john20

    other example
    ###################
    your cccam.cfg should look like this:
    F: jack jack01 5 0 0 { 0:0:3 }
    C: 81.23.45.67 12000 john01 john20

    his cccam.cfg has the next setting if your ip would be 82.34.56.78
    F: john01 john20 5 0 0 { 0:0:3 }
    C: 82.34.56.78 12000 jack jack01

    ####################

    if you get to mutch of the same cards from different servers,
    Then you can put in a filter
    as example we use canal+:
    C: 82.34.56.78 12000 jack jack01 no { 0100:00006a:2, 0:0:4 }

    no

    means that you do not want to use your friends emu's
    yes wil explain it self but you need to put something in here (yes or no)

    0100:00006a:2

    This means that you get your C+ card keys from a distance of 2 hops.
    So you get keys from your friend and your friends friend

    0:0:4

    this means you get all cards from a max of 4 hops, with this you wil prevent your screen from freezing up or turning black.
    Putting this higher then 5 is no use at all.
    Normaly you can delete all unused text from your cccam.cfg and leave only the F and C line in there (and other ones when needed).
    Offcource it's beter to put some data in it just for you to know who it is or what his ip adress is etc etc.
    Also keep a cccam.cfg on your pc or print it out for save keeping.
    All this has been tranlated and typos could be possible.
    Correct me if i'm wrong

  2. #2
    Junior Member
    Join Date
    19-11-2007
    Posts
    11
    Uploads
    19

    Re: how to setup cccam.cfg for cardsharing

    Very good.. thanks

  3. #3
    New Member
    Join Date
    12-12-2007
    Posts
    4
    Uploads
    0

    Re: how to setup cccam.cfg for cardsharing

    This is the best tutorial I have come across so far... phew!! man you stopped my heart from regrets. Gosh I have the "famous dreambox" but for a week that I owned it, was like a cheap DVB-s reciever cos every furum I went searching for the HOW, every tutorial is just explaining some scientific kinda jargons!! and nothing this decriptive as this... Thumbs up man... Thank you very much..

  4. #4
    New Member
    Join Date
    12-12-2007
    Posts
    4
    Uploads
    0

    Re: how to setup cccam.cfg for cardsharing

    Hi Deltix1, now I got one last thing that I hope you or anyone can help me with. How do I creat a server on my Dbox? I read so much stuff and they are saying things like creating and account at dyndns point org which I already did, so now what?

  5. #5

    Re: how to setup cccam.cfg for cardsharing

    Quote Originally Posted by Otroski View Post
    Hi Deltix1, now I got one last thing that I hope you or anyone can help me with. How do I creat a server on my Dbox? I read so much stuff and they are saying things like creating and account at dyndns point org which I already did, so now what?
    The first thing you need to do is forward your dyndns in your hub.

    Every hub is diferend so you need to check your own hub manual for this, but you should look at port forwarding.
    Default port that dm uses is 12000 so you should start with that port first.
    Once you have done this you need to create a f line in cccam as explained in the text above.
    Futrher more you also need to do, is to go to your bleu menu and look for services and deamons.
    For every image of the dm might be different, just look and you wil find.
    Look under that menu for lnadyn select it and use bleu to change the setup of that service.
    Once you have done all that you can send a c line to whom ever you want to share, and put in a dyndns instead of a ip adress.
    It could look like this; C: your.dyndns 12000 john01 john20

    It wil always fail for the first time but it is pretty straight forward.
    Some times a reboot of hub and dm wil do wonders.

    Good luck
    And a merry christmas to you all.
    Ps don't make the cherry bombs to big or you wil have problems typing

  6. #6
    New Member
    Join Date
    01-05-2005
    Posts
    1
    Uploads
    0

    Re: how to setup cccam.cfg for cardsharing

    HI,

    Can anyone tell me how to filter received cards from peers in order to get only cards with maxdown > 1 ( only cards with reshare )

    example :

    C : xxxxx.dyndns.org 12000 user pass

    what's the parameters to add at the end to do that

    Thanx for all

  7. #7

    Re: how to setup cccam.cfg for cardsharing

    Quote Originally Posted by dimah77 View Post
    HI,

    Can anyone tell me how to filter received cards from peers in order to get only cards with maxdown > 1 ( only cards with reshare )

    example :

    C : xxxxx.dyndns.org 12000 user pass

    what's the parameters to add at the end to do that

    Thanx for all

    If you read the last part of the how to it explains everything, the only thing you need to do is to find the provider id which you want to filter, and set it up the way you want.
    It's tricky but once you have it correct then it should work.

  8. #8

    Re: how to setup cccam.cfg for cardsharing

    A small add on in case you have problems with local cards on that some servers in your list try to fake their local cards.

    In the cccam.cfg the first lines i have put in .

    TRY ALL CHIDS : /dev/sci0
    # this will take care that your local card works and will not use a remote server instead.
    MINIMUM CLIENT VERSION : 2.0.0
    # this is for my own safety deu to some server mess around with old cams, these old cams give them the option to cheat and fake others by letting them think they have a lot of hop 1 , (2.14 gives them this option, and 2.15 2.19 have some other problems).
    # if you see in your servers list and note that someone is using 2.14 or lower then your own server slows down, including every one in your share list, at least i noted the difference, so all cams older then version 2.0.0 will be blocked.
    ZERO HOP FILTERING : YES
    #filters out hops with with 0 (causes slow down of your server, and disables the checks on these 0 hops which don't work anyway).


    I use these settings for some time now, and i noticed that my updates and refresh time is shorter then before, more speed more happy card sharing, less complaints, and you keep out fakers.
    If i find more i'l let you know.

    happy sharing

    deltix1

  9. #9

    Re: Thanks Deltix !!

    hi
    i have a cline but puting only the cline in cccam.cfg i have a lot of freeze
    it is all i have to do or is important to do something else

  10. #10

    Re: Thanks Deltix !!

    Quote Originally Posted by profesori View Post
    hi
    i have a cline but puting only the cline in cccam.cfg i have a lot of freeze
    it is all i have to do or is important to do something else
    Depends how you have setup your hub/modem , it looks like you do not have port 12000 (or other port) open and redirected to your fixed ip address of the dreambox (or other box).
    Small tool tip for those who have problems setting up open ports, try this link it's free program.
    The only thing you need to do is select the correct modem/hub and use the correct password to enter.

    http://www.pcwintech.com/simple-port-forwarding

    i use this all the time and makes life easy.

    happy sharing.
    deltix1

Page 1 of 2 12 LastLast

Similar Threads

  1. Tutorial How to setup cccam server on stream Bm-Smart
    By *SID* in forum Stream
    Replies: 0
    Last Post: 07-05-2011, 15:32:57
  2. how to setup CCCam.cfg for everybody,,free
    By Allaf in forum General Discussions: Cardsharing
    Replies: 0
    Last Post: 04-11-2009, 12:51:33
  3. CCcam server setup
    By erno in forum CCcam Exchange: Free
    Replies: 0
    Last Post: 16-08-2009, 14:00:49
  4. setup cccam.cfg
    By waloop in forum Dreambox
    Replies: 0
    Last Post: 02-12-2008, 23:10:39
  5. I am willing to help people to setup cardsharing
    By boza111 in forum General Discussions: Cardsharing
    Replies: 20
    Last Post: 02-01-2007, 08:04:32

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •