Results 1 to 10 of 10

Thread: Gbox Server under windows

  1. #1
    Junior Member
    Join Date
    07-11-2008
    Posts
    14
    Uploads
    1

    Gbox Server under windows

    Hello

    I'm trying to install a Gbox server on a windows PC.

    I'm using an infinity USB unlimited and a vi@cce$s card. The infinity is in phoenix mode running on a virtual COM2 port.

    Here is the gbox_cfg file I'm using :

    W: { 00 00 } 9600
    G: { 03 }
    C: { 01 }
    M: { 01}
    A: { 02 }
    U: { 02 }
    H: { 01 }
    T: { 00 }
    O: { 00 } 192.168.2.2
    L: { 00 } 192.168.2.2
    Z: { 01 10 } 192.168.2.2 XXXX
    V: { 00 02 }

    I'm using Gbox Control V1.9j on windows XP.

    When I start the gbox, it can't see my card. Here is the log I get :

    Installing ioperm driver...

    Starting Gbox, please wait...
    Seasonport=0 speed=9600
    OSD (dbox2) IP = 192.168.2.2

    gbox 2.1B/Windows&DOS@X86 ( Dec 2 2005, 02:46:51 )
    mode 03
    AU:02/update:02/KeyFile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
    could not open ./irdeto
    could not open ./seca
    could not open ./via
    could not open ./nagra
    could not open ./conax
    My IP 192.168.002.002 ID 444C (192.168.2.2) pass XXXXXXXX, we are online
    IP 192.168.002.102 Port XXXX-XXXX ID C444 pass YYYYYYYY sharelevel 5/5 (192.168.2.102)
    enx_conf = 3 ; reset on zap=0
    Total 1 ports to monitor
    monitoring port: XXXX
    CPU 80X86 compatible
    TPSCrypt 1 PTS 1/1
    /dev/ttyS1 opened with 1 multicam(s)
    mode: any pid
    have to init card 11
    entering main loop
    ReRead pmt.tmp
    ->HelloL to 192.168.2.102 (192.168.002.102:XXXX)
    ReRead pmt.tmp
    ReRead pmt.tmp
    <-Hello from 192.168.2.102 port XXXX
    **** hashTableECM 0 elements ****
    **** hashTableEMM 0 elements ****
    ReRead pmt.tmp
    ->HelloL to 192.168.2.102 (192.168.002.102:XXXX)
    **** hashTableECM 0 elements ****
    **** hashTableEMM 0 elements ****

    Could you please help me ? I was searching and reading forums for the last two weeks, I can't figure it out.

    Thanks in advance;

  2. #2
    Junior Member
    Join Date
    20-04-2005
    Posts
    18
    Uploads
    1

    Re: Gbox Server under windows

    try this V: { 01 0F }

  3. #3
    Junior Member
    Join Date
    09-11-2007
    Location
    marseille
    Posts
    19
    Uploads
    7

    Re: Gbox Server under windows

    Quote Originally Posted by tombrate View Post
    try this v: { 01 0f }
    can someone give me all tools for sharing, with a starsat 4200 d or a 6300 cu super.
    Thanks for advance

  4. #4
    Junior Member
    Join Date
    07-11-2008
    Posts
    14
    Uploads
    1

    Re: Gbox Server under windows

    Quote Originally Posted by tombrate View Post
    try this V: { 01 0F }
    I changed the V line like that and here is what I get :

    enx_conf = 3 ; reset on zap=0
    Total 1 ports to monitor
    monitoring port: 5555
    CPU 80X86 compatible
    TPSCrypt 1 PTS 1/1
    Could not open rs232 port /dev/ttyS0 (No such file or directory)
    /dev/ttyS1 opened with 1 multicam(s)
    mode: any pid
    entering main loop
    ReRead pmt.tmp

    Still not working

  5. #5
    Junior Member
    Join Date
    04-05-2006
    Posts
    16
    Uploads
    0

    Re: Gbox Server under windows

    You must use newcs + cs2gbox + gbox and the card will work 100%.
    Gbox don't handle usb device.

  6. #6
    Junior Member
    Join Date
    07-11-2008
    Posts
    14
    Uploads
    1

    Re: Gbox Server under windows

    Quote Originally Posted by ovidiumarius View Post
    You must use newcs + cs2gbox + gbox and the card will work 100%.
    Gbox don't handle usb device.
    Could you please help me configuring newcs + cs2gbox + gbox ?

    I tried that, but I don't think I'm configuring well the files.

    I'm always using gbox control, as it has gbox, newcs and cs2gbox. If I start newcs and cs2gbox first, gbox won't start, and when I start gbox first, newcs and cs2gbox won't start.

    Can you give me a the good configuration ?
    I'm doing all this on a lan :
    - IP of server : 192.168.2.2
    - IP of client : 192.168.2.102
    - port : anyone
    - Infinity USB unlimited is in mode virtual com port COM2
    - I have a local vi@cce$s card
    - gboxwell as a client (advise me if I should use another one)

    PS. : I already succeeded to make newcs alone read the card, but the problem was making client connect to it (says "unknown user tryed to login").

  7. #7
    Senior Member brippi68's Avatar
    Join Date
    15-09-2008
    Posts
    272
    Uploads
    0

    Re: Gbox Server under windows

    The advice that I give to you is to change version of gbox.
    You use a corrupted version.
    You test version 1.9 h!

  8. #8
    Junior Member
    Join Date
    07-11-2008
    Posts
    14
    Uploads
    1

    Re: Gbox Server under windows

    Quote Originally Posted by brippi68 View Post
    The advice that I give to you is to change version of gbox.
    You use a corrupted version.
    You test version 1.9 h!
    Hi, I'm not sure that I understand.

    are you advising me to use 1.9h or are you saying that I'm using the version 1.9h which is corrupted ?

    Actually I'm using gbox version 2.1b (and now switched to 2.25) and I'm using gbox control version 1.9j.

    Still the same problem with these versions.

  9. #9

    Re: Gbox Server under windows

    Quote Originally Posted by abg1979 View Post
    I changed the V line like that and here is what I get :

    enx_conf = 3 ; reset on zap=0
    Total 1 ports to monitor
    monitoring port: 5555
    CPU 80X86 compatible
    TPSCrypt 1 PTS 1/1
    Could not open rs232 port /dev/ttyS0 (No such file or directory)
    /dev/ttyS1 opened with 1 multicam(s)
    mode: any pid
    entering main loop
    ReRead pmt.tmp

    Still not working
    I have the same config (approximatly) ...
    I use :
    V: { 00 05 }
    AND configure your Phoenix mode on 6 Mhz

  10. #10

    Re: Gbox Server under windows

    u mean without Newcs and cs2gbox?

Similar Threads

  1. Question Windows home server & dm500s
    By RIKE in forum French / Français
    Replies: 0
    Last Post: 14-12-2009, 13:47:11
  2. gbox et windows
    By arnaud1212 in forum French / Français
    Replies: 1
    Last Post: 10-06-2009, 20:02:10
  3. Whats best windows server or unbuto server
    By assy23 in forum Cardsharing Information and Support
    Replies: 0
    Last Post: 04-03-2009, 07:23:35
  4. server gbox local Gbox Premier Full
    By coolscript7 in forum Gbox Exchange: Local
    Replies: 3
    Last Post: 08-02-2009, 17:36:07
  5. gbox windows problem any help
    By home9 in forum General Discussions: Cardsharing
    Replies: 0
    Last Post: 21-07-2007, 10:04:03

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •