Results 1 to 4 of 4

Thread: Impossible voir ma carte local sous gbox

  1. #1

    Impossible voir ma carte local sous gbox

    Hello,
    mon serveur gbox fonctionne bien mais impossible de voir ma carte local (mon abo sat) qui est sur le port com2 avec lecteur phoenix

    Merci d'avance pour votre aide

  2. #2

    Re: Impossible voir ma carte local sous gbox

    Quote Originally Posted by DTS View Post
    Hello,
    mon serveur gbox fonctionne bien mais impossible de voir ma carte local (mon abo sat) qui est sur le port com2 avec lecteur phoenix

    Merci d'avance pour votre aide
    salut l ami

    peux tu me montrer ta config du fichier gbox_cfg

    ton phoenix est sur quel com et ton demo ?

    as tu bien activé le mode phoenix?

    ton phoenix est relié a un port com rs232 ou usb_rs232?

    as tu rajouté ton port dans ton routeur en udp?

    @++++

  3. #3

    Re: Impossible voir ma carte local sous gbox

    re

    voila un tuto qui pourra d aider

    remplace les **** par http

    ****://www.speedyshare.com/111434526.html

    bon courage et bonne fin d année


    @+++++++

  4. #4

    Re: Impossible voir ma carte local sous gbox

    Voila mon fichier

    phoenix sur com2 en rs232
    pas de sortie sur demo car carte inter sat

    mon gbox cfg
    # gbox config file

    # Trace/Debug
    # xx yz ; xx=00 no konsole output
    # xx yz ; xx=01 konsole output
    # xx yz ; y=0 debug output (don't use)
    # xx yz ; y=1 no debug output
    # xx yz ; z=0 ouput to konsole
    # xx yz ; z=1 output to /var/tmp/debug.txt
    # xx yz ; z=2 Output to UDP (to capture with gboxt)
    Z: { 01 12 } 192.168.2.2 8024
    # Task type
    # 00 ** normal mode gbox mode (no season, use Multicam instead)
    # 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
    # 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
    # 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
    # 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
    # 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
    # ** *1 Com port to use for season emulatiom (1 or 2)
    # ** 0* Use CTS fr RST detection
    # ** 1* Use DCD fr RST detection
    # ** ** 9600 = Baudrate to be used (working only on dbox2)
    W: { 00 00 } 9600
    # gbox working mode
    # 00 pure Emu
    # 01 pure SoftCam (when card inside), Emu (when no card inside)
    # 02 pure Net Client
    # 03 Mixed mode !!!!! always use this !!!!!
    G: { 03 }
    # Display ECM messages on Konsole
    # 00 don't show any ECM's
    # 01 show only valid ECM's
    # 02 show valid and bad ECM's with complete data display
    C: { 01 }
    # Display EMM messages on Konsole
    # *0 don't show any EMM's
    # *1 show only valid EMM's
    # *2 show valid and bad EMM's with complete data display
    # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
    M: { 01 }
    # AutoUpdate
    # 00 is ignored (default)
    # 01 enable AU
    # 02 Auto AU !!!!! always use this !!!!!
    A: { 01 }
    # Key update
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    U: { 01 }
    # Hash pids
    # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
    # 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
    H: { 01 }
    # Key files folder
    # 00 keyfiles in /var/keys
    # 01 keyfiles in /var/tmp
    T: { 00 }
    # OnScreen Display for the Multysystemcam on com1/com2
    # 00 No OSD (default)
    # 01 display Smartcard messages in Neutrino
    # 02 display Smartcard messages in Neutrino new nhttpd format
    # 03 display Smartcard messages in Enigma
    # mypass (use user=root and pass=mypass for nhttpd)
    O: { 03 } 192.168.2.2 root dreambox
    # Logger and NET-mode UDP port Init
    # 00 do not init UDP port
    # 01 Init UDP port for IP, port, UDP
    L: { 01 } 192.168.2.2 6666
    F: { 01 } /dev/shm/pmt.tmp
    # demux, multicam/comport configuration
    # *x ** ; x = device nummber to be used (0= default)
    # D* ** ; force use of /proc/bus/gtx for cw write operations
    (in the dbox2 the gbox writes directly the CW's, 00 is the
    recommended mode ! No drivers are required) use D* ** ONLY if
    you have Problems. 0* ** should be prefered !!!
    # F* ** ; write CW's in both devices (used for PVR in STB04xxx devices)
    # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
    # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
    # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
    # ** *z ; z=0001b (0x*1) use com1 as Multicam
    # ** *z ; z=0010b (0x*2) use com2 as Multicam
    # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
    # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
    # ** *z ; z=0100b (0x*4) invert CTS detection on com1
    # ** *z ; z=1000b (0x*8) invert CTS detection on com2
    # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
    V: { F0 35 }
    # RS232 SSSP mode
    # x debug messages, 1=on, 0=off
    # y com port to use (0=none, 1=com1, 2=com2)
    R: { 00 }
    # ================================================== ===========================
    # extra options to override default seting in case you expirience Problems,
    # normaly these setings are not required.
    #
    # cpu, api, cw write method
    #
    # 00 auto
    # 01 80X86
    # 02 MPC823
    # 03 IBM STB04xxx
    # 00 auto
    # 01 ibm
    # 02 api2
    # 03 api3
    # 00 cw write style = use internal routine (only dbox2)
    # 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
    # 02 cw write style = CA_SET_DESCR type2
    # 03 cw write style = CA_SET_DESCR type3
    # 04 cw write style = 16 byte /proc/bus/gtx
    # 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
    # xx write cw in 1st device with index=xx
    # yy write cw in 2nd device with index=yy
    # 01 means with .index=0 (default)
    # 02 means with .index=1
    # 03 means with .index=0 and .index=1
    # .. any bitwise combination ...
    # FF means with all 8 indexes (0-7)
    #J: { 01 00 00 01 01 }

    # Files, folders, devices
    # folder/device comment
    #
    #F: { 01 } /var/tmp/pmt.tmp // pmt file
    #F: { 02 } /var/tmp/emm.info // key update log file
    #F: { 03 } /var/tmp/ecm.info // ecm info file
    #F: { 04 } /var/tmp/atack.txt // atack info file
    #F: { 11 } /var/keys // folder for config files
    #F: { 12 } /var/tmp // folder for temporary file
    #F: { 13 } /var/tmp // folder for keyfiles
    #F: { 21 } /dev/dvb/adapter0/ca0 // ca device
    #F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
    #F: { 23 } /dev/dvb/adapter0/demux0 // demux device
    #F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
    #F: { 41 } /dev/sci0 // STB04xxx slot1
    #F: { 42 } /dev/sci1 // STB04xxx slot1
    #F: { 43 } /dev/tts/0 // rs232 com1
    #F: { 44 } /dev/tts/1 // rs232 com2

    # For overclocking freaks, Clocking internal STB04xxx slots with:
    # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
    # Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
    # The Dream has not a clean clock signal, some cards that are sensitive will
    # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
    # On other STB04xxx recievers the same cards work with 6.30MHz
    #
    F: { 58 } 03

Similar Threads

  1. Replies: 19
    Last Post: 03-11-2009, 15:36:39
  2. CCCam avec Progdvb et carte DVB sous XP: Est-ce possible?
    By sam54 in forum French / Français
    Replies: 10
    Last Post: 12-08-2009, 16:38:13
  3. Carte bleue off impossible dans Dream 500S
    By klhac in forum French / Français
    Replies: 6
    Last Post: 28-05-2009, 09:56:16
  4. fte gbox mnsv4+serial pour voir la lumiere
    By hackeurs50 in forum French / Français
    Replies: 3
    Last Post: 24-02-2009, 20:07:09
  5. MAJ impossible carte bis TV sur 9100
    By paykoman02 in forum French / Français
    Replies: 2
    Last Post: 03-01-2009, 13:34:26

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •