Results 1 to 10 of 10

Thread: Ubuntu server

  1. #1

    Ubuntu server

    HI
    How can i make my personal computer to work with LINUX UBUNTU with 3 card .
    Thanks

  2. #2

    Re: Ubuntu server

    Check your PM Good luck

  3. #3
    Junior Member
    Join Date
    16-04-2005
    Posts
    10
    Uploads
    13

    Re: Ubuntu server

    same question :p , but i don't want to use my receiver to share but any phoenix programmer like infinity or other thx for reply

  4. #4

    Thumbs up Re: Ubuntu server

    I Recently bought a Acer AspireOne netbook and installed Ubuntu over the Limpus that came with it and managed to get CCcam Server running on the Netbook in 5 simple steps.
    If you have Ubuntu up an running I am assuming that you have some Linux knowledge and can change access right for files, and have root access in a terminal window etc.

    step 1 - Set Static IP ADDRESS
    Edit the file /etc/network/interfaces
    and replace:
    iface eth0 inet dhcp
    with
    auto eth0
    iface eth0 inet static
    addtress 192.168.1.255
    netmask 255.255.255.0
    braodcast 192.168.1.255
    gateway 192.168.1.1

    the actual addresses ets will be to suite your own requirements
    Step 2 - Create working Directories for CCcam to operate
    Open a root terminal window and create the following directories withe the following code:
    mkdir /emu
    mkdir /emu/cccam
    mkdir /emu/script
    mkdir /emu/log
    mkdir /var/etc
    mkdir /var/etc
    mkdir /emu/keys


    Then change the permissions of the directories by typing the code:
    chmod 777 /emu
    chmod 777 /emu/*

    Then Change Ownership of the directories by typing the code:
    chown username /emu
    chown username /emu/*

    The username is your username to access Ubuntu
    Step 3 - Create startup script
    Create a CCcam Script (text file) in the directory /emu/script/ called cccam
    and add the following text and save as cccam
    #!/bin/sh
    CAMNAME="CCcam Server"
    # end
    # This method starts CCcam
    start_cam ()
    {
    /emu/cccam/CCcam.x86 &
    sleep 2
    }
    # This method stops CCcam
    stop_cam ()
    {
    pkill CCcam.x86
    }
    case "$1" in
    start)
    echo "[SCRIPT] $1: $CAMNAME"
    start_cam
    ;;
    stop)
    echo "[SCRIPT] $1: $CAMNAME"
    stop_cam
    ;;
    restart)
    echo "Restaring $CAMNAME"
    stop_cam
    start_cam
    ;;
    *)
    "$0" stop
    exit 1
    ;;
    esac
    exit 0

    Then in the root terminal window
    type:
    chmod 755 /emu/script/cccam
    ln /emu/script/cccam /bin/cccam


    Step 4 - Install CCcam & Config Files
    then download and un-zip the latest cccam file

    put the file CCcam.x86 into the directory /emu/cccam
    and the file CCcam.cfg file in the directory /var/etc

    Go back into the root terminal and type the code:
    chmod 755 /emu/cccam/CCcam.x86

    Step 5 - your ready to go
    Set up your F: & C: Lines in the /var/etc/CCcam.cfg file
    in a terminal window type the command
    cccam start - to start your server
    cccam stop - to stop your server
    cccam restart
    - to re-start your server

    Good Luck

  5. #5
    Junior Member
    Join Date
    14-05-2005
    Posts
    22
    Uploads
    0

    Re: Ubuntu server

    Thanks for the info but is it more stable and fast.

  6. #6

    Thumbs up Re: Ubuntu server

    The server i set up on the Ubuntu was just done to see if it works, I have also set it up on Limpus Linux using the above.
    Personally I use Debian Linux, Which is quite stable but depends on the quality of your card reader and your internet speeds.

    Regards

  7. #7

    Re: Ubuntu server

    Debian linux or unbuto can support 10 cards?
    What the maximum of card a server under linux can support
    what the best linux to support the maximum cards.
    I understand that more than 10 cards you have problems
    specialy if you are using nds videogard
    wich need special server.
    Why do you say it depand on the quality of the card reader ?
    So what is better ubunto or debian or other version of linux ..
    Why not windows server 2003 ?

  8. #8
    New Member
    Join Date
    02-10-2008
    Posts
    5
    Uploads
    0

    Re: Ubuntu server

    hey guys,

    Any update on the above questions ? from the experiences masters :)

    cheers

    Djoss.

  9. #9
    New Member
    Join Date
    27-12-2005
    Posts
    8
    Uploads
    0

    Re: Ubuntu server

    Thanks you very much

  10. #10

    Re: Ubuntu server

    hey guys,

    I need a script too start cccam if it stop or freesing,
    And how i install this.
    i use ubuntu 8.10.

    Sorry abaut my bad english.

Similar Threads

  1. server ubuntu
    By yhoga in forum Italian / Italiano
    Replies: 3
    Last Post: 28-11-2009, 23:04:30
  2. New Ubuntu CCcam Server 24/7 Free, Best Server Ever
    By mr fly in forum CCcam Exchange: Free
    Replies: 50
    Last Post: 08-10-2009, 03:02:37
  3. Replies: 2
    Last Post: 03-10-2009, 17:27:53
  4. Replies: 0
    Last Post: 03-04-2009, 19:58:39
  5. New Ubuntu server 24/7
    By labionda in forum CCcam Exchange: Local
    Replies: 0
    Last Post: 07-02-2009, 17:47:58

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •