Esto va puesto en nuestra dream

Var/etc/,etc/Cccam cfg atributos 644


################################################## ##################### friends
Aquí pondremos nuestros pass y las lineas F
################################################## ####################

Imaginarios que hacemos un intercambio de Cline

ejemplo de cómo hacerlo.

los colegas son luis y pedro y luis da sus datos a pedro y los coloca de esta manera.


F: pedro cardfull 2 0 0 { 0:0:1 } esto es hop 1 card en distancia 1

cuantos mas altos los hop mas cards pero tambien mas fakes

F: pedro cardfull 2 0 0 { 0:0:2 } esto en hop card en distancia 2


esto se podria cambiar por 1.2.3 depende de las cards que quieras coger.

## syntax for to add a friend user to CCcam with the max up hops limit (default = 5)# sharing of emus (default = 1), allow emm (default = 1), and optional# downshare limits per share (default = no limits) and optional# downshare limits per share based on caid:id:sid# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)# if no timeslot is defined 24 hrs a day is used# emus are shared only one level down, even if no limits given## max username length 20# password length 'unlimited'##F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address## example:## F: user1 pass1## user1 gets all our shares at max 5 hops from us# (our local cards + max five hops away). He can share down to his own# clients. He also receive emu shares (if he has 'yes' behind his C: entry),# and is allowed to send us emm.## F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }## user2 gets only our local cards but no 0100:000080.# and our 0622:000000 cards only for himself (1 hop down),# and 0500 cards for himself plus one additional hop down.# He also gets our emus, and is NOT allowed to send us emm (updates).## F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }## user3 gets all cards at a maximum of 5 hops away from us,# and get's to share them down two further levels beyond his own level.# But he is not allowed to share 0100:000080 down to other users.# He gets no emus from us, and he is allowed to send us emm.## F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }## user4 gets all cards at a maximum of 5 hops away from us,# and get's to share them down two further levels beyond his own level.# But he is not allowed to share 0100:000080 down to other users.# He gets no emus from us, and he is allowed to send us emm.# He is also not allowed to view channel 0100:000080:15df## F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }## user4 gets all cards at a maximum of 5 hops away from us,# and get's to share them down two further levels beyond his own level.# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00# outside these hours the share will not give cw's to the client### F: user5 pass5 5 1 1 { } { } { } 192.168.1.1## user5 gets all cards at a maximum of 5 hops away from us# user5 is only allowed to connect from the host 192.168.1.1

################################################## ######################
connections
Aquí pondremos nuestras conexiones para el sharing

################################################## ####################

C: luis21.dyndns,org 12000 pedro cardfull no { 0:0:2 }

Esto tambien lo podemos cambiar por 1.2.3 dependiendo de que cards quieras pillar


####syntax for to add a client connection to other CCcam# add yes on end to use friends emus (non public private key/emu,etc...),# but only works when corresponding F line on server has '1' for <shareemus># optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)##C: <hostname> <port> <username> <password> <wantemus> ( { caid:id(:uphops), caid:id(:uphops), ... } )##note: if {} limits are added, <wantemus> cannot be omitted. Use either yes or no.### C: someserver.somedomain 12000 user1 pass1# C: 192.168.1.2 12000 user2 pass2# connects to CCcam without use of friends emus## C: 192.168.1.2 12000 user3 pass3 yes# connects to CCcam, and receives friends emus also.C:# syntax for to add newcamd server connection##N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>## example:## N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14## add a newcamd card, give it an offset of 2 hops, in the share list## N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2## stealthy login on newcamd server:## N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1## stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic# syntax for to add radegast server connection##R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>## example:## R: 127.0.0.1 678 0100 000080# syntax for to add camd3 connection##L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>## example:## L: 127.0.0.1 567 dummy dummy 0100 000080# syntax for add gbox connection##G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>## support optional limits just like C line (ignore shares more than 'uphops' away)# { caid:id(:uphops), caid:id(:uphops), ... }## example:## G: AABBCCDD my.address.tv 2500 12345678 peer.address.tv 2500

################################################## ####################
# Other config settings #
################################################## ####################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#

SERVER LISTEN PORT : 21000


Aquí numero de puerto para el sharing en mi caso e puesto el 21000

esto deberias abrirlo en el router y redirecionando la ip de la dream.


# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
#ALLOW TELNETINFO: no
#ALLOW WEBINFO: no

# Show extended client info when showing client list
# default is yes
#
#SHOW EXTENEDED CLIENT INFO : no

# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : <username>
#WEBINFO PASSWORD : <password>

# The telnetinfo service can be protected with a username and password.
# This is switched off by default
#
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>

# default port for telnet is 16000
# default port for web is 16001
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use:
# echo servers | telnet localhost 16000
# go with your browser to http://ip_CCcam_server:16001
#

#TELNETINFO LISTEN PORT : 16000

Esto dejarlo como esta sin tocar este el port del server

#WEBINFO LISTEN PORT : 16001

# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#