Many of you know what its like to wait for someone to create a bin file for us CAS 2 users. Well no more searching or waiting. Just follow these easy steps. I have based this tutorial on the latest co**x 23-03-04.mbf file, as an example.
Install the latest CAS 2 Studio and start the program, then press connect
Press ERASE ALL, when prompted select yes.
The next step is to program the Dreamload.bin. In CAS 2 Select LOAD FILE
Now the file is loaded, Press WRITE.
Now press VERIFY to make sure all went well in this 1st step.
Important: In the START Address change it to 10000, go back to normal model then Select OPEN FILE
Now load the latest penta.mbf file
As you can see the END address adjusted correctly once the file is loaded
go back to normal mode
Once again press WRITE
After Writing has completed, Press VERIFY.
Last step is to load and write the Xilinx File, Select Xilinx and open the MAGIC.CAS file.
No need to press WRITE as it will start the process automatically. All that’s left is to EXIT the program disconnect the USB lead, remove CAM and away you go….END