Results 1 to 6 of 6

Thread: funcard7 & dragon cam - next step info

  1. #1
    New Member
    Join Date
    30-09-2005
    Location
    Cambs
    Posts
    8
    Uploads
    0

    funcard7 & dragon cam - next step info

    Hi everybody, i have a fixed dish on hotbird & am still trying hard to unlock the channels that the latest version of pred will let me view.
    i am have been reading though all the forums,i have been trying to get to grips with it,but as a newbie i am still things a little difficult!!
    i have a TM1500ci+ - T-REX (dragon cam) - FUN7 prussiangalaxy5 card.
    I am stuck on which file to use to program the card so i can ativate the cam in my menu settings on the box.
    i had a go at programming the card from one of the tutorials that i found but after following that step by step nothing seemed to work how it should of done when i inserted the cam & card.
    I used the software that came with my INFINITY USB PHOENIX & selected phonix mode 3.58, loaded fun7loader in flash
    nothing in internal eeprom
    loaded pred fun7 eeprom1 in eerpom EXT1
    loaded pred fun7 eeprom2 in eerpom EXT2 then write to card.
    i then put my box on a FTA channel & turned off power ,inserted card into cam & cam into slot accessed the menu & nothing has happened?
    I am not sure if this is was the right way of doing this sort of card??
    i would be ever so greatfull if some one could tell me if using the software that came with infinity phonix is ok to use?? also what mode & crystal speed i set it to. What files i have to use & where i put them??
    I dont have a dragon loader card, i only got a fun7 when i brought my dragon cam.the fun7 dosent work when i use drogonload so i read that this is the way to program my fun7 properly.
    sorry to go on guys but i am pulling my hair out out now.
    i dont no if im doing things right or not

    MANY THANKS ANY HELP WOULD BE GREAT

  2. #2
    Banned
    Join Date
    28-05-2005
    Location
    Borring,. but I too live in Zion
    Posts
    129
    Uploads
    125

    Thumbs up Re: funcard7 & dragon cam - next step info

    Don't no about manual inserting keys
    but the dragon and inifinty holds no
    secrets 4 me.
    I can explain...........
    but just formulate the ......(?)
    in advanced I can tell you, there are
    a lot off cannels to watch
    multivsion ,TPS and more are open 4 you.
    I will help
    but need to know what you want?
    Bien

  3. #3
    New Member
    Join Date
    30-09-2005
    Location
    Cambs
    Posts
    8
    Uploads
    0

    Smile Re: funcard7 & dragon cam - next step info

    on hotbird i want to view intalian channels & football channels if possible?!
    Or any movie channels if possible.Or blue movie channels
    I am getting a motarised dish very soon, so any channels that i can unlock on the other satellites.im not too sure on what channels are out there that i can get & on what satellite s they use?!I was hoping to get my new dish then get a ideas of what channels i would like to view after that.
    The more the Better!!!

  4. #4
    Banned
    Join Date
    28-05-2005
    Location
    Borring,. but I too live in Zion
    Posts
    129
    Uploads
    125

    Re: funcard7 & dragon cam - next step info

    I hear you.........
    its possible bur you
    need to know how to update
    ur dragon
    the latest version off Pradator
    is 3.23..........
    that is what you want/ need
    in the iternal you load the . bin file
    int the ext
    goes the .dra......
    thats all

  5. #5
    Member
    Join Date
    31-03-2005
    Location
    Europe
    Posts
    29
    Uploads
    8

    Re: funcard7 & dragon cam - next step info

    Quote Originally Posted by ogNUTS
    Hi everybody, i have a fixed dish on hotbird & am still trying hard to unlock the channels that the latest version of pred will let me view.
    i am have been reading though all the forums,i have been trying to get to grips with it,but as a newbie i am still things a little difficult!!
    i have a TM1500ci+ - T-REX (dragon cam) - FUN7 prussiangalaxy5 card.
    I am stuck on which file to use to program the card so i can ativate the cam in my menu settings on the box.
    i had a go at programming the card from one of the tutorials that i found but after following that step by step nothing seemed to work how it should of done when i inserted the cam & card.
    I used the software that came with my INFINITY USB PHOENIX & selected phonix mode 3.58, loaded fun7loader in flash
    nothing in internal eeprom
    loaded pred fun7 eeprom1 in eerpom EXT1
    loaded pred fun7 eeprom2 in eerpom EXT2 then write to card.
    i then put my box on a FTA channel & turned off power ,inserted card into cam & cam into slot accessed the menu & nothing has happened?
    I am not sure if this is was the right way of doing this sort of card??
    i would be ever so greatfull if some one could tell me if using the software that came with infinity phonix is ok to use?? also what mode & crystal speed i set it to. What files i have to use & where i put them??
    I dont have a dragon loader card, i only got a fun7 when i brought my dragon cam.the fun7 dosent work when i use drogonload so i read that this is the way to program my fun7 properly.
    sorry to go on guys but i am pulling my hair out out now.
    i dont no if im doing things right or not

    MANY THANKS ANY HELP WOULD BE GREAT
    To program the Funcard you have to use 6mhz cristal(If you select Dragoncard it should automatically change for you.
    Then select the file you want to load(predator 3.23)
    Also select Reverse Span.

  6. #6
    Banned
    Join Date
    28-05-2005
    Location
    Borring,. but I too live in Zion
    Posts
    129
    Uploads
    125

    Wink Re: funcard7 & dragon cam - next step info

    in addtion :
    there's no need to insert
    keys manually
    when the Dragon is set upped right

Similar Threads

  1. JTAG DREAMBOX DM500 Step by Step BY ABDTOUAB
    By ABDTOUAB-SAT in forum Dreambox
    Replies: 2
    Last Post: 09-12-2009, 20:40:50
  2. Tutorial Step by step How To use Nabilo Mount Wizard
    By Tunimax in forum Dreambox Information and Tutorials
    Replies: 2
    Last Post: 13-10-2009, 21:50:21
  3. tvp info for dragon ?
    By nigel in forum General Discussions: Cams
    Replies: 0
    Last Post: 22-09-2008, 10:23:19

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •