Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: N3XT rev 001.02 Early release

  1. #1
    Junior Member igoreshka's Avatar
    Join Date
    19-04-2009
    Posts
    12
    Uploads
    0

    Exclamation N3XT rev 001.02 Early release

    C&P

    N3XT rev 001.02 Early release


    Thx to n3xt


    Quote:
    This is the first beta test of N3XT. It does not do n3 internal emulation yet!
    This is not THE FIX!!

    The purpose of this release is, picking up where emunation-sc left off, direct
    smartcard access for rom24x cards fixed and improved error handling in both
    cardclient and smartcard.

    You really ought wipe your old directory and install all the files fresh, ini
    has quite a few changes. Move your custom settings from your old
    emunation.ini to your new n3xt.ini.

    rev 001.2
    - Smartcard support for rom 24x fixed.
    - Removed ca.cache support. Improved cardclient recovery from
    bad ecm packet.
    - New config file cardslot.conf which contains the serial port configs.
    Play with toggling CD or RST if you have trouble. Also, if you are
    using secondary key with rom 24x, leave the boxkey at the default.
    - SmartCardPort config removed from n3xt.ini.
    - Telefonica will work if you have keys and proper eep73_102.bin file.

    See the *.conf files in the distro zip for examples.

    A note about secondary key and boxkeys. I think a lot of peeps think
    they know their boxkeys, but are wrong. If you are using secondary key
    and leave the default 1122334455667788 in smartcard.conf, the program
    will calculate boxkey for you and print it out during the init in the console.
    This math is the same RQCS uses and it works. If its different than what
    you think your boxkey is and you are watching tv, then the calculated
    one is actually correct.

    If you specify boxkey in smartcard.conf it will use what you specify no
    matter how wrong it is, i.e. no TV.

  2. #2
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    N3XT Rev 001.9

    Latest Change:
    - Added support for GBPVR recordings.

  3. #3
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    18.09.2009 : N3XT rev 2.0

    Latest Change:
    ================================================== ========== ====
    rev 002.0
    Added gui configuration screen. All options are immediately enabled/disabled on check/uncheck.
    New option for show pids. This shows the ecm/emm pids that are reported from the app. Some
    make no sense so you get a before/after sanity check. This is intended to make debuging easier
    with some apps. n3xt.ini entry is SHOWPID=0/1.

  4. #4
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    N3XT rev 2.1

    Latest Change:

    Revised thread locking for improved performance with multiple servers.
    Concurrent network connections with load balancing between concurrent
    connections. Each server is tested for a good response and those giving
    good responses will be used round-robin. The number of concurrent
    connections and acceptable response times are fixed for now, I'll add them
    to the config screen after a few other projects in progress get finished.
    Latency and connection problems will be mostly unnoticed with several
    servers running.

    Console replaced by a gui screen. There is still some work to be done here,
    remember position on extended monitor and copy/paste. You can still log to
    a file. But there so many other changes and improvements it didn't seem
    reasonable to hold back waiting for those last items.

    Config screen being a modal window eliminated.
    Link in zip to the VS2008 runtimes updated to sp1.

  5. #5
    Moderator
    Join Date
    12-08-2008
    Posts
    1,362
    Uploads
    720

    Re: N3XT rev 001.02 Early release

    N3XT Rev 002.2

    Latest Change:
    ================================================== ========== ====
    rev 002.2
    Add copy and paste to new console. Fix Dvbdream startup. Add fault tolerance to cardclient.
    Change MyTheatre menus. Move About into Config dialog box. Fix dialog box save positon to
    extended monitor (doesn't work for MT).
    Add config item for max simulataneous connections. Must be between 1 and 8. N.B. Will not take
    effect until the program is restarted. Default=2.
    Add optional keepalive in newcamd cardclient. Helps when using some multiple servers arrangement.
    hostname port [/keepalivetime]:emm See cardclient.conf Use keepalive if you see servers
    connecting/disconnecting.

  6. #6
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    N3XT rev 002.4

    Latest Change:
    fix bug in cardclient.conf reload code, close a file handle leak.
    a few little message changes

  7. #7
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    N3XT rev 002.5

    Latest Change:
    ================================================== ========== ====
    rev 002.5
    Fix cardclient EMM Processing

    Added option to enable/disable config file monitoring for
    reload in INI file and in options dialog. Default disabled.
    Changed Process EMM selections so the EMM-G and EMM-S/U are
    seperately selectable.

    Changed logging so that instead of creating directories named
    for the date, files have the date in the name and they all go to
    one directory.

    By default, the AppData\N3XT directory is now used for changable N3XT files.
    All applications will share the same files.
    S_K_location and LogPath n3xt.ini file entries override using AppData\N3XT.

    An "Explore Data" button was added to the options dialog that opens
    a explorer window at AppData\N3XT because it is not easy to get there
    in Vista or Windows 7. Manual file edits to conf files can then be made.

    Change default max connections to 1, check your ini and change it if you
    have one connection and have not changed the old default entry.

  8. #8
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    N3XT rev 002.7

    Latest Change:
    ===================================
    rev 002.7
    Fix EMM-S/U logging
    Add DCW display to console options

  9. #9
    VIP Member
    Join Date
    04-03-2009
    Posts
    5,494
    Uploads
    980

    Re: N3XT rev 001.02 Early release

    N3XT rev 002.8

    Latest Change:
    ===================================
    Fix smartcard dt08 with bev
    Change maxparser to improve emm parsing. Use MaxParser, there is still an issue
    in the regular one.

  10. #10
    VIP Member
    Join Date
    09-11-2009
    Posts
    604
    Uploads
    0

    Re: N3XT rev 001.02 Early release

    Latest Change:
    - Change retry rules on ecm failure in cardclient,
    see Guide to N3XT (version 2) for details.
    - Improve parser efficiency. Add cache messages to options dialog.
    - Add channel data to emm-s/u log.

Page 1 of 2 12 LastLast

Similar Threads

  1. New Teletext switches off early around the UK
    By sofien72tu in forum Daily Satellite TV News
    Replies: 0
    Last Post: 16-12-2009, 14:34:05
  2. Gol TV hits 1m early
    By sofien72tu in forum Daily Satellite TV News
    Replies: 0
    Last Post: 15-12-2009, 18:23:47
  3. New Early start for Portuguese HD DTT
    By <<ELVIS>> in forum Daily Satellite TV News
    Replies: 0
    Last Post: 11-08-2009, 15:56:27
  4. New BBC looks for early HD DTT
    By <<ELVIS>> in forum Daily Satellite TV News
    Replies: 0
    Last Post: 23-10-2008, 10:03:20
  5. New Still early for Spanish pay DTT
    By <<ELVIS>> in forum Daily Satellite TV News
    Replies: 0
    Last Post: 04-09-2008, 10:28:28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •