Results 1 to 3 of 3

Thread: New Gamma card

  1. #1
    New Member
    Join Date
    09-08-2008
    Posts
    5
    Uploads
    0

    New Gamma card

    Hi i posted the other day about problem with my new gamma card keep getting the message smart card initializing.I have followed all the tips but still cant get it to work this is a brand new card and the ATR number is ok please can anyone help ps the equipment i have is a motorised dish with technomate 1500ci reciever and diablo card with cas programmer plus my new gamma.

    Thanks Steve:

  2. #2
    Senior Member
    Join Date
    24-03-2005
    Posts
    400
    Uploads
    1

    Re: New Gamma card

    did your card work before ?or you programming and stop work

  3. #3
    Senior Member moi's Avatar
    Join Date
    23-03-2005
    Location
    Hassi Messaoud-(oilfield) Algeria
    Posts
    149
    Uploads
    4

    Re: New Gamma card

    Quote Originally Posted by steve o View Post
    Hi i posted the other day about problem with my new gamma card keep getting the message smart card initializing.I have followed all the tips but still cant get it to work this is a brand new card and the ATR number is ok please can anyone help ps the equipment i have is a motorised dish with technomate 1500ci reciever and diablo card with cas programmer plus my new gamma.

    Thanks Steve:
    How to program Gamma Card with Cas 3
    ________________________________________
    Instructions for program the card with latest current sources

    Hope this thread will help all new users
    We know this thread is little delay but even till now this card keep getting new users


    ***DO NOT use the Gamma card option in cas 3 smart cards section of the cas 3***

    This Guide are only for loaders:
    Version
    1.0
    1.1
    2.2

    >For Sh*wtime loader V 1.1 needed to continue getting updates
    versions 1.0 & 2.2 was only mainly use for add/show, but is not advised any longer the use for it(all thought will not damage ur card).

    >for Eur* 1080 HD & N*va mainly loader V 1.0
    can be use V 1.1 as well with no harm for the card
    in fact seems to be an update
    i don't have more infos about it right now sorry.

    #You will need install in ur pc or laptop, Microsoft NET FRAME WORKS at l east version 2.0, available from Microsoft web.

    #A straight serial cable 9 pin with the correct ends needed

    Please follow this steps in the order i m suggesting:

    1. Open cas 3 by click the icon on your desktop
    2. connect the usb cable, wait till program starts
    3. go to utilities tab
    4. click the phoenix mode
    5. choice 3.579 mhz usually for pc, or 6 mhz for laptop
    6. hide button
    7. open the needed loader with glasses by double click it
    8. in the loader window when opens correct the settings in com port,
    tick the 6 mhz button only if need it, load the latest file where u saved
    it.
    9. Insert your card chip down & connect the serial cable
    10. now click program

    Shortly u will see the message "card program successfully"

    That's it!!!
    Take out card & plug it in your stb / cam & wait ti AU.

    Sometimes some small tips need to be done for faster AU:
    Go to the transponder that you think it may AU better, switch on / off your stb, flick channels up / down, take card out ot the cam stb slot etc
    NOTE

    If you see the message NO ATR then go to step 5 & change the mhz.
    Is good advise as well to check your serial cable if is been connected well!

    -----------------------------------------------------------------

    Similar process is for cas 2, dynamite
    both is been confirm working 100% but will need additional ADD ON


    ENJOY YOUR CARD

Similar Threads

  1. changing Cerebro Card,into gamma card?
    By Sandman77 in forum Cerebro Card
    Replies: 7
    Last Post: 18-01-2010, 02:01:11
  2. card reader gia gamma card
    By stavros211 in forum Greek / Ελληνικά
    Replies: 39
    Last Post: 23-07-2009, 00:29:34
  3. Digiturk 7e on gamma card (kebap card)
    By assy23 in forum Gamma Card
    Replies: 5
    Last Post: 01-03-2009, 15:44:36

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •