Results 1 to 10 of 10

Thread: Gamma card not Atr Help

  1. #1

    Gamma card not Atr Help

    Hi All
    My Gamma card appears to be dead, I recently updated it with nova file and it worked for 2 days but not anymore, in my technomate 6900 super it says invalid card, so I was looking for an older file to reload that, if I put the gamma card in the cas3 programmer and it says no atr.
    anyone any ideas
    regards

  2. #2
    Senior Member kapazita's Avatar
    Join Date
    11-07-2009
    Posts
    136
    Uploads
    0

    Re: Gamma card not Atr Help

    Check that you have chosen correct COM port.

  3. #3

    Re: Gamma card not Atr Help

    no com port no phoenix problem b/c i have aouther card show atr i try atr kit but 5 day still waiting

  4. #4
    Senior Member
    Join Date
    04-02-2009
    Posts
    587
    Uploads
    3

    Re: Gamma card not Atr Help

    no atr to me what i do??????

  5. #5

    Re: Gamma card not Atr Help

    Quote Originally Posted by stergiost3 View Post
    no atr to me what i do??????
    use sataid loader with any file. after 20 min your card will be ok !

  6. #6

    Re: Gamma card not Atr Help

    i try more time problem stil

  7. #7

    Re: Gamma card not Atr Help

    hi did you repair your card
    i have the same problem

  8. #8

    Re: Gamma card not Atr Help

    Mostly if emergency Atr error message comes, then one selected wrong Comport or the cable is not attached. The error message comes even if the map not in that subject lies.

  9. #9
    Senior Member moi's Avatar
    Join Date
    23-03-2005
    Location
    Hassi Messaoud-(oilfield) Algeria
    Posts
    149
    Uploads
    4

    Re: Gamma card not Atr Help

    Quote Originally Posted by satleonhh View Post
    Mostly if emergency Atr error message comes, then one selected wrong Comport or the cable is not attached. The error message comes even if the map not in that subject lies.
    Can you follow the instructions I hope it will be ok Open Sataid Team GammaLoader and load your gam file
    Then reset the card with emk & check the atr
    good luck be patient

    http://www.sendspace.com/file/gvj939

  10. #10
    Senior Member moi's Avatar
    Join Date
    23-03-2005
    Location
    Hassi Messaoud-(oilfield) Algeria
    Posts
    149
    Uploads
    4

    Re: Gamma card not Atr Help

    I have found this is not from me it's copy paste

    English:

    If a gamma card displays showing errors such as incorrect or no ATR or ATR, the ATR does not appear try the following steps to find out whether or funzt.

    the first thing we should know what ATR is an "empty" AT90SC7272C atmel smartcard (the smartcard, the type of the gamma benόtzt)

    ATR an empty Atmel AT90SC7272C
    3B 7F 11 00 00 00 6B 1A 0E 06 4b16 36 23 09 11 03 05 90 00

    1A corresponds to the 7272c chip type (and not the 3232C, or 6464c)

    0E 06 4b16 36 23 09 11 the serial number corresponds to the smartcard
    0305 corresponds to the version of the boot-loaders
    90 00 is the map showing the unwritten

    smartcards (AT90SC7272c atmel processor) programmed with the operating system of the gamma-have team:


    ATR Gamma Card V1.4
    3B 9F 21 0E 47 41 4D 4D 41 43 41 52 44 20 56 20 31 2E 34 9D

    that is, if we ****** simulate (that is, if we miss alters the map, a new gammafile) is also in the ATR:

    ATR ****** ACS V4.1
    3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 34 2E 31 9D

    In the newer version ****** we have:

    ATR ****** ACS V5.0
    3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 30 9D

    ATR ****** ACS V5.3
    3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 33 9E

    ATR ****** ACS V5.4
    3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 34 99

    if the card is blocked then the ATR ends in 6983 or 69 89

    I think that in most fδllen with the ATR problem is not the operating system of the gamma Broken
    but only a question of communication between the PC and the programmers.

    on what we mόssen eight by the gamma used correctly:

    1) the cable with which we connect the PC and the programmer must have a RS323 MF be (not the cable that we at the receiver and PC benόtzen)

    2) the serial port (COM port) of the gerδte-manager is engestellt must be the same as the programmer with the

    3) if the programmer has no direct serial connection and we got a usb adapter to serial benόtzen we absolutely need the drivers.

    4) how mόssen to abide by the programmer geanu get the correct voltage it needs.

    5) a very important topic which is the operating system and processor speed benόtzen (a Q6600 Vista64 SP1, the loader does not funz EMF 3.5, a somewhat δlteren PC with WINXP SP3 lδufts and easily.
    the new software by Duolabs CAS3 "CAS Studio 8.6c" is, in my opinion the best software to read the gamma or describe.

    Several users reported reading the card in a gamma with various programs, the announcement was awarded as "bad or no ATR ATR".
    The advantage of CAS3 is in no serial cable needed but only a USB.
    natόrlich if we have a software benόtzen except the CAS Studio mόssen then we also connect a serial cable and set the option MHz.

    6) is also one of the most important things that we read the card, the kφnnen gamma MHz option correctly set.
    the ATR (Answer To Reset) is the first contact between the operating system of the gamma card and programmer,
    that is, if we do not have the setting Richtg MHz as obtained from the manufacturer then we get the message "bad or no ATR ATR which means that the map is broken"

    7) so that we read the gamma kφnnen we should benόtzen a phoenix programmer 6 MHz
    (programmer natόrlich gehts with other but I think Phoenix is the Best Positions for the gamma).

    if we want that the CAS3 funzt with EMK3.5 we benόtzen the Phoenix 6 MHz mode and combine it with a serial cable.
    (and to pay attention to the COM port that we benόtzen is the same as in the EMF 3.5.

    __________________

Similar Threads

  1. changing Cerebro Card,into gamma card?
    By Sandman77 in forum Cerebro Card
    Replies: 7
    Last Post: 18-01-2010, 02:01:11
  2. card reader gia gamma card
    By stavros211 in forum Greek / Ελληνικά
    Replies: 39
    Last Post: 23-07-2009, 00:29:34
  3. Digiturk 7e on gamma card (kebap card)
    By assy23 in forum Gamma Card
    Replies: 5
    Last Post: 01-03-2009, 15:44:36

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •