Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: generale Dreambox Tutorials and Dreambox Guides

  1. #1
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    generale Dreambox Tutorials and Dreambox Guides

    How To Download SKY UK EPG with Nabilosat Black Hole images

    Nabilosat Black Hole images for DM7025, DM800 and DM8000 include an exclusive feature: download the weekly SKY UK EPG via satellite, and have it integrated to Enigma2. This guide will briefly show how to complete the procedure.
    The EPG is downloaded from the satellite signal available from the radio channel Hip Hop, frequency 11778, symbol rate 27500. There are 2 options to zap to this channel.
    1) Edit your settings
    Open your settings with your favorite editor, and add the radio channel to any TV bouquet. This procedure will give you the option to quickly zap to Hip Hop
    2) Enable Alternative Radio mode
    Press MENU, and browse to SETUP>SYSTEM>CUSTOMIZE and set Alternative Radio mode to YES. This procedure will give you the option to zap through radio channels in radio mode, and have the full MENU active like in TV mode

    Then, press the Blue button to access to Nabilosat Blue Panel

    And press it again to open the Nabilosat E2 settings. Move the cursor to Nabilo E2 EPG, and press OK

    The Nabilo E2 EPG Settings panel will open

    Press the red button to modify settings. Here you can enable/disable the loader, select the path where to save the EPG, and select the Hip Hop radio channel. Press the red button again to save your settings. Enigma2 will be restarted.

    Once Enigma2 has restarted, go back to Nabilo E2 EPG settings, and press the yellow button. The channel list will popup. With the keys left/right set each channel to YES if you wish to download its EPG, or to NO if you wish to exclude it. Scroll up/down with the keys up/down. The Update channel feature, available through the green button, is useful when the provider completes a channels retuning. The list will be automatically updated, upon pressing the green button, and will include new channels and new frequencies.

    The previous steps complete the setup, and are necessary only to modify settings such the destination path or channel list.
    To download the EPG, simply zap to Hip Hop, wait for the popup window


    Wait for the countdown to be over.

    You will have updated your Sky UK Weekly EPG, and you will be able to browse through it with GraphMultiEPG, MultiEPG and the other Enigma2 EPG features.

  2. #2
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Dreambox Keys Directory and Other Path of different EMU

    Dreambox Keys Directory and Other Path of different EMU

    AU Files, Camd3, Camx, cccam, Config Files, EMU, Evocamd, GBox, Keys Directory, Mgcamd, Newcamd, Prgram files, Radegast, Scam
    Camx:
    Keys Directory: /var/keys/ - Softcam.Key Autoroll.Key
    Prgram file : /var/bin/
    Config Files : /var/etc/
    AU Files : /var/keys/Autoroll.Key
    ________________________________________

    GBox:
    Keys Directory: /var/keys - seca,nagra,via,irdeto,conax
    Prgram files: /var/bin - gbox
    Config Files: /var/keys - gbox_cfg
    AU Files: /var/keys/roms/
    ________________________________________

    Camd3:
    Keys Directory: /var/keys - camd3.keys
    Prgram files: /var/bin - camd3
    Config Files: /var/keys - camd3.conf - camd3.config
    AU Files: /var/keys/ - seca_hash.bin - seca2_hash_0070.bin
    seca2_mask_0070.bin - camd3.keys
    ________________________________________

    Evocamd:
    Keys Directory: /var/keys - Autoupdate.Key & Keylist.txt
    Prgram files: /var/bin - evocamd
    Config Files: /var/keys - camd_cfg
    AU Files: /var/keys - Autoupdate.Key - /var/scce/
    ________________________________________

    Newcamd:
    keys directory: /var/scce -keylist, ppua, rsakeylist & tpscrypt of
    /var/tuxbox/scce (newcamd 6.01, kan oude dir gebruiken)
    Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
    Config files: /var/tuxbox/config - newcamd.conf, cardserv.cfg, betad.cfg
    AU files: /var/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin,
    sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin,
    nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin,
    nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist
    ________________________________________

    Mgcamd:
    keys directory: /var/keys - SoftCam.key & AutoRoll.key
    Program files: /var/bin - mgcamd
    Config files: /var/keys - mg_cfg
    AU files:
    ________________________________________

    Scam:
    Keys Directory: /var/keys - seca2,nagra,via, - irdeto,conax
    Prgram files: /var/bin - scam
    Config Files: /var/keys - softcam.cfg
    AU Files: var/keys/ - seca2 - /nagra_rom
    ________________________________________

    Radegast :
    keys directory: /var/keys - SoftCam.key & AutoRoll.key
    Program files: /var/bin - rdgd, camd.rdgd, netpilot
    Config files: /var/etc - radegast.cfg
    AU files: Need a patched driver for older conax cards

    ________________________________________
    CCcam:
    Keys Directory: /var/keys - Softcam.Key, AutoRoll.key & constant.cw
    Program Files: /var/bin - CCcam, capmtserver
    Config Files: /var/etc - CCcam.cfg
    AU Files: /var/keys - Autoroll.key

  3. #3
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    How to config CCcam.cfg

    how the config works with CCcam.
    To add a user you have to put a F line in the config :
    F: user password 3 1 0 { 0:0:5 }
    user gets all our cards at max distance(hops) of 3
    He has the right to use our emu keys 1, no rights to emu keys change into 0
    He has NO AU rights 0, right for AU change into 1
    Furthermore he has the right to reshare all our cards 4 more times { 0:0:5 }
    When number is here { 0:0:1 } he can only watch himself and he has no reshare rights.

    NEVER GO ABOVE NUMBER 5!! because the distance is to far then. ( like GBOX { 5 5 })
    You can set portnumber by changing this rule :
    # SERVER LISTEN PORT: 12000
    into
    SERVER LISTEN PORT: number you want.

    To connect to a CCcam server you have to add a C line:
    C: ip/dyndns_server port user password yes
    The yes on the end says you want to use your rights for emu keys
    To connect to a newcamd server you have to add A N line:
    N: ip/dyndns port user password deskey hops_away
    To connect to a radegast server you need to add a R line:
    R: IP/dyndns port CAID(4digits) providerID(6digits) hops_away
    To connect to a Camd3 server you have to add a L line:
    L: IP/dyndns port CAID(4digits) providerID(6digits) hops_away
    These are the basics of the config for CCcam.
    Expert setup follows
    (03-30-2007 09:39 AM)
    OK here we go, the above settings are the basics now we go further.

    With a Cccam server you are always in controll
    You decide how much your friend is going to see and how far he can reshare it

    F: user password 0 0 0 { 0:0:1 }
    Says that user gets only our local cards:0 and he only can watch it himself he has no reshare rights.
    When changing the zero into 1 user gets our local cards and all vitual cards at a max distance of 1 hop.
    If number is 2 then a max distance of 2 hops etc.
    Don’t exceed number 5 because the distance is then too far away for stable picture

    In case U have 2 local cards and U only want that user get to see 1 u can do this excample:
    Card 1 = provider CDS 0100 00006A
    Card 2 = provider Premiere 1702 000000

    Now you want that user only gets to see your CDS card and not the premiere card do the following
    F: user password 3 1 0 { 0:0:5, 0100 00006A:1, 1702:0:0 }
    This user gets all cards at maximum distance of 3 hops except 1702 because he has no rights to it :0.
    He gets to reshare all our cards(local and virual) 4 times except for provider 0100 0006A because of :1.
    Say you want the user to have the right to reshare 0100 0006A 2 times further then change the :1 into 3

    So you see U decide what your friend(s) are entitled to see and how many rights they get, wants your card is set to reshare level 3 nobody but yourself can change that.
    If you have questions feel free
    In the latest versions of CCcam it’s possible to control your hops you are receiving from your peers.
    Thats realy a good option now you are in control how many shares online you have.

    Heavy testing for me said that 2500 shares online is maximum.
    To control receiving hops just add { 0:0:x } at the end of the C line, where x is the number of hops you want to receive.
    So: C: dyndnds port user passwd no { 0:0:2 } only gives me shares from that peer with max count of 2.
    Important: If you dont use yes/no behind the C lines add them or:
    ( { 0:0:2 } ) make it like this otherwise it won’t work

  4. #4
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    generale Dreambox Tutorials and Dreambox Guides

    Running Gbox and CCcam on the same box

    1st Script
    copy this in gbox_cam.sh

    —————————————
    CAMNAME=”GbOx_CCcam”
    USERNAME=””
    ZAPTIME=8
    CAMID=970
    DVBSET=1
    INFOFILE=”ecm.info”
    # end
    # This method cleans up /tmp folder of gbox files
    remove_tmp ()
    {
    rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
    }
    # This method starts Gbox > CCcam (That order)
    start_cam ()
    {
    /var/script/AES_Gbox.sh &
    sleep 5
    /var/bin/gbox &
    sleep 30
    /var/bin/CCcam_2.0.3 &
    }
    # This method stops gbox and CCcam and then calls the tmp cleanup method
    stop_cam ()
    {
    touch /tmp/gbox.kill
    /bin/prockill gbox
    /bin/prockill CCcam_2.0.3
    killall -9 newcs cs2gbox 2> /dev/null
    remove_tmp
    }
    case “$1″ in
    start)
    echo “[SCRIPT] $1: $CAMNAME”
    start_cam
    ;;
    stop)
    echo “[SCRIPT] $1: $CAMNAME”
    stop_cam
    ;;
    restart)
    echo “Restarting $CAMNAME”
    stop_cam
    start_cam
    ;;
    *)
    “$0″ stop
    exit 1
    ;;
    esac
    exit 0
    ————————————–
    rename ur cccam ver in CCcam_2.0.3 or CCcam_2.0.4 ,CCcam_2.0.5
    and reboot
    this scrip is for Gemini i have test it it works very will u have gbox and cccam together .
    —————————————-
    You just have to take care about the name of both cams. It must be the same as the cam files in your dreambox.
    You need about 30 sec delay between the start of gbox and the start of CCcam : even if gbox starts first , CCcam will take your local card (it is faster) so you will appear with no local for your gbox partners.

  5. #5
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    generale Dreambox Tutorials and Dreambox Guides

    Step by Step Gbox server setup on DM

    Before I start to write the How to I decided to describe first the necessarily steps to build a gbox server. So don’t except How to with all Details. The questions about gbox server will show which details will be needed.
    1. Get the files
    2. Put the files in the right folders
    3. Make the needed configuration
    4. add and exchange dlines
    5. control your gbox
    6. possible errors and reasons
    1. First download all files from the following link
    Gbox2.1b
    2.Extract the files and you will see also the path where the files should be put
    //var/bin => gbox
    //var/keys => cwshare.cfg,gbox.cfg,softcam.cfg
    //var/script => gbox_cam.sh
    //var/tuxbox/plugins => egboxcenter.cfg,egboxcenter.so,gboxsuite.cfg, egboxsuite.so, gbv.cfg,gbv.ident,gbv.soGBOX_CFGIn your gbox_cfg file you have following lines
    Use a Ftp program to put the files in the folders. I prefer flashfxp. After you had put the files in the folders. Make CHMOD changes for the following files. You can make the CHMOD changes by using the right mouse button (FLASHFXP) on the file and selecting Attribute (CHMOD).
    //var/bin/gbox => CHMOD 755
    //var/keys => cwshare.cfg => 644
    //var/keys => gbox_cfg => 644
    //var/scripts => gbox_cam.sh => 755
    3. Coniguration
    You must made only individual changes to cwshare.cfg and gbox_cfg
    CWSHARE:
    This file is responsbile for communication between the peers.
    Following lines should be inside this files
    M: => Adress of your gbox
    I: => Configuration about till which distance cards you allows to get
    X: => Configuration abotu how many of the same card you allows to get
    D: => Communication line between the peers
    N: =>
    W: =>
    How should the lines be set:
    M-LIne
    M: { your.dyndns.org { Password }}
    => Password: You can only use 0-9 and A-F for setting password. My suggestion is don’t use a very very easy password like 12345678 or AABBCCDD or ABCD1234, so a lot of people makes that and this can be a reason for an error, if you start the gbox. More details at the end.
    I-Line
    I: { 03 }
    This is the selected value most gbox user set for their I-Line. Because with this configuration you only accept cards till Dist3. Cards with Dist4 and Dist5 are not good for sharing and gettings keys. If you have later more peers you can set the value to 02.
    X-Line
    X: { 10 }
    This is a value should experiment a little bit which value is the best for your gbox server. As you know with this value you set a limit to the number of same cards. 0A, 10, 08 this are the most used values.
    N-Line
    N: { 00 01 03 3F 4000 6000 }
    I will write more details to this line. Use the N-Line given above ( its my N-Line)
    W-Line
    W: { 01 01 01 } 1FFF
    I will write more details to this line. Use the N-Line given above ( its my N-Line)
    D-Line
    This is the most importan Line
    D: { other.dyndns.org { Port1 Port2 { Password { A5 A5 }}}}
    other.dyndns.org => the dyndns of your share peer
    port1 => your port number using for gbox
    port2 => port number of you peer
    Password => password of your peer
    A5 A5 => Share Level for Local and Virtual Cards
    You will get this dline every time for your peer. So the only thing you had to do is, to put your port number instead of port1 and add it in your cwshare.cfg. The Dline you give to your peer is the the same but with your dyndns, password and your port number is port2.
    D: { own.dyndns.org { Port1 ownport { own password { A5 A5 }


    Z: { 01 12 } dream ip 8024
    G: { 03 }
    C: { 01 }
    M: { 01 }
    A: { 00 }
    U: { 01 }
    H: { 01 }
    T: { 00 }
    O: { 03 } dream ip
    L: { 00 } dream ip 8029
    W: { 00 00 } 9600
    V: { F0 35 } => configurations for reading slot and com-ports
    V: { F0 00 } nothing
    V: { F0 10 } slot 1
    V: { F0 20 } slot 2
    V: { F0 30 } both slots
    V: { F0 35 } both slots + com ports
    V: { F0 05 } only com ports
    V: { F0 31 } Sc8in1
    V: { 00 05 } Dbox2 multicam
    I will made later a detailed description for this file. The informations above are taken from my gbox_cfg
    4. Add and exchange Dlines
    After ending configuration you can now exchange dlines
    M: { own.dyndns.org { password }}
    # Internet Friends port range password cod
    I: { 2 }
    X: { 0A }
    N: { 00 01 03 3F 4000 6000 }
    W: { 01 01 01 } 1FFF
    D: { other.dyndns.org { yourport otherport { otherpassword { A5 A5 }}}}
    Be carefull if you add dlines it must the same like above. No more spaces or less spaces
    5. Control Gbox and peers
    Gbox Center and Gbox Suite are plugins to have Informations about your peers, Cards, Distance and Level Share and how many cards do you have for each provider
    You can access to this plugins
    Blue Panel => Plugins => Gbox Center or Gbox Suite
    6. Error and Reasons
    If your gbox is not working ( you will see it if you go to: Blue Panel => Plugins => Gbox Center => Gbox Share Center => Peer Status => Message that share is not found, check if gbox is running )
    Then check following
    1. Internet Connection
    2. Correct format of dlines ( Spaces, password (0-9,A-F) )
    3. Passwords of the dline ( so if two peers use the same password they will get the same Box ID and two same Box ID in one Gbox Server is not working)
    4. Some Cards needs special configuration to share them ( Sky Uk, Nova etc)
    I hope this How to will help a little bit. I will make in the next time screenshots and will give more datailed informations for some Lines.

  6. #6
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Re: generale Dreambox Tutorials and Dreambox Guides

    CCcam Installation and Setup Complete Tutorial In DMM

    1ST BOOT YOUR DREAMBOX, AFTER A SUCCESSFUL BOOT, GO TO ANY RADIO OR TV CHANNEL, PRESS THE BLUE BUTTON FROM YOUR REMOTE CONTROL.YOU WILL SEE THIS WINDOW, SUPPOSE YOU HAVE FLASHED YOUR BOX WITH THE GEMINI PROJECT V.3.60

    NOW SELECT THE OPTION ADDONS WHICH IS LABELED WITH 2ND OPTION.

    SELECT BY SCROLLING THROUGH YOUR REMOTE CONTROL UP AND DOWN KEYS OR SIMPLY PRESS THE BUTTON LABELED WITH 2 FROM YOUR REMOTE NUMERIC KEYS.

    NOW SELECT DOWNLOAD AND INSTALL, YOU WILL SEE THIS WINDOW, MAKE SURE THAT YOUR ARE CONNECTED WITH INTERNET AND YOUR INTERNET IS SHARED WITH YOUR BOX.

    NOW SELECT CCcam 2.0.4 COMPLETE DOWNLOAD, CLICK ON IT AND IT WILL START DOWNLOADING YOUR CCcam FILES.

    AFTER SUCCESSFUL CCcam 2.0.4 FILES DOWNLOAD, YOU WILL SEE THIS INDICATOR.

    SELECT YES TO INSTALL THE CCcam 2.0.4 ON YOUR BOX.
    NOW CLICK EXIT FROM YOUR REMOTE CONTROL AND SELECT DOWNLOAD CAM CONFIG

    NOW SELECT CCcam 2.0.4 CONFIG FILES.

    to be continued

  7. #7
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Re: generale Dreambox Tutorials and Dreambox Guides

    AFTER SUCCESSFUL DOWNLOAD YOU WILL BE PROMOTED TO INTALL THE CONFIG FILE.SELECT YES TO INSTALL.

    AFTER SUCCESSFUL INSTALL YOU WILL SEE AN INDICATOR FOR YOUR CONFIRMATION.

    NOW EXIT THE ADDONS SCREEN, NOW START THE DDC (DREAMBOX CONTROL CENTER FROM YOUR COMPUTER).CONNECT YOUR BOX WITH THE COMPUTER.

    NOW SELECT FTP FROM DCC, NOW SELECT VAR/ETC AND SELECT CCcam.CONFIG FILE,RIGHT CLICK ON IT AND SELECT EDIT.

    NOW REPLACE YOUR CCcam.CONFIG FILE WITH THE DOWNLOADED FILE.

    NOW CLOSE THE EDITOR, YOU WILL BE PROMOTED TO SAVE THE EDITED FILE AS A REPLACEMENT SELECT YES.

    NOW EXIT THE DCC (DREAMBOX CONTROL CENTER).
    AGAIN NOW PRESS THE BLUE BUTTON,

    NOW SCROLL THE COMMON CAM TO CCcam 2.0.4 AT THE TOP WITH THE HELP OF VOLUME BUTTON FROM YOUR REMOTE.

    to be continued

  8. #8
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Re: generale Dreambox Tutorials and Dreambox Guides

    NOW SELECT AUTO CAM ENABLE,

    NOW SELECT AUTO CAM SETUP AT THE TOP.

    A NEW WINDOW WILL BE OPENED

    NOW SELECT CCcam 2.0.4 AS DEFAULT CAM.

    NOW EXIT THE ALL OPENED MENUS.
    IN IDLE MODE REBOOT YOUR BOX.

    YOUR CCcam 2.0.4 WILL BE RUNNING , HAPPY CCcam SHARING.

  9. #9
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Re: generale Dreambox Tutorials and Dreambox Guides

    How to Connect Dreambox to PC

    You might want to connect your dreambox to your PC for a number of reasons; stream MP3s or movies from your PC to the dreambox, record from the dreambox to a shared folder on your PC, to update the image, services or bouquets, etc.
    What is needed

    If your dreambox is going to be connected straight to your PC then you will need a crossover ethernet cable. This is not the same as a standard patch ethernet cable that you get with your router or cable modem, the send and receive wires are crossed, hence the name. This cable is more commonly used to connect ethernet equipped PCs together without a hub or router. But we need it to connect to the dreambox as well.
    Configuring your PC

    One side of the crossover cable needs to be connected to your PC, obviously. Most PCs only have one ethernet connection and it’s usually used for the internet connection. It’s advisable to buy a second network card and keep it solely for the use of the dreambox, these are about £5 from your local computer shop. But this guide will show you how to connect it to you existing ethernet connection.
    I’m using Windows XP Pro but the steps may be different for other operating systems.
    Go to the Control Panel then Network Connections. Find the ethernet connection that you would use for your internet. Right click it and select Properties. Scroll down to ‘Internet Protocol (TCP/IP)’ and select Properties. If you do use this connection for your internet then it should have the ‘Obtain an ip address automatically’ selected. Change the settings so that it looks like this…

    Select OK and reboot your PC. Remember at this point you will not have any internet access so make sure you have a copy of all the guides and tools that you need. Or connect your modem via USB.
    Configuring your Dreambox

    I will use an enigma image in this example, neutrino can also be used and the same values should be used although the menus may look different and be in a different place.
    Go to Menu > Setup > Expert Setup > Communication Setup
    Change the settings to look like this…

    Select Save and exit from the other menus.
    Connecting to the Dreambox

    To connect to the dreambox we are going to use an FTP Client. There are many programs available for this, FlashFXP, CuteFTP, Filezilla and SmartFTP are some examples. For this guide we are going to use FlashFXP.
    Once you’ve downloaded it, run the flashfxp.exe file and the program will load.
    In the left window is where the dreambox file system will appear after we connect. In the right window is your PC file system. Treat both windows like any other windows explorer window. To transfer files between the dreambx and PC, cimply drag the file from one window to the other and wait for it to transfer. The bottom left window shows a history of the files transferred and the progress of current files during transfer.
    Near the top, on the toolbar, you should see an icon with a lightening strike on it, click it and choose ‘Quick connect’ (you can also press F8 on your keyboard). Configure the options to look like this…

    Server or URL: 192.168.1.101
    Username: root
    Password: dreambox
    Port: 21
    Click Connect.
    You should now see the file system of the dreambox on the left, i.e. /bin, /dev, /etc, /hdd, /sbin, /var, etc etc.

  10. #10
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Re: generale Dreambox Tutorials and Dreambox Guides

    How To Setup 2 Dreambox For Cardsharing In Lan Or Wan

    This guide its to help newbies to setup 2 boxes for Card Sharing in
    Lan or Wan.

    You need :

    2 dreamboxes ( of course)network conected
    1 Network cable

    a) If you connect the 2 boxes direct you need a cross network cable
    if you connect the to boxes in a hub with other network devices then you need straigth network cable
    (both of them easy to find in computer stores)
    ************************************************** ********
    Network setup:
    Go in dreambox setup-expert setup-network settings and put ip address (something like this)
    dreambox1 : ip 192.168.0.1
    subnet 255.255.255.0
    gateway (ip address of the router)
    DNS (ip address of the router)
    If you dont have Internet connection leave Gateway and DNS blanc

    dreambox2 : ip 192.168.0.2
    subnet 255.255.255.0
    gateway (ip address of the router)
    DNS (ip address of the router)
    If you dont have Internet connection leave Gateway and DNS blanc

    Check the enable Networking chekbox

    If you have a PC thats connect to internet (dialup or adsl) then you can put the pc's ip
    as Gateway and DNS server in both boxes to give them internet access

    IMPORTAND
    If you have a router for the internet the ip of the 2 boxes MUST be in same
    network as your router.
    Examples:
    If the router's Ip address is 10.0.0.1 then your boxes ips MUST be 10.0.0.2 and 10.0.0.3
    If your router's IP address is 192.168.1.1 then your boxes MUST be 192.168.1.2 and 192.168.1.3

    Now your boxes are connected... and with internet access (if its present)
    ************************************************** ********
    EMU and CardSharing How to:

    Install in your boxes one of new images.
    I prefer PLi Diamod as gives you the choise to have separate server and client EMU.
    In this example we will use as cardserver EMU the NewCS and as client EMU Newcamd
    So download and install in the boxes the 2 EMUS (NewCS and Newcamd). If only 1 dreambox
    it will act as a server then in the second one you dont need to install NewCS, only NEwcamd

    Now we have to to configure the files for the sharing
    ************************************************** ********
    Server configuration of the file Newcs.xml (/var/tuxbox/config)
    (in the supplied zip there is a Newcs.xml file for this example)

    Open the file with a plain text editor (i use UltraEdit)

    Find the section <debug>
    and then <udp_host>192.168.0.1</udp_host>
    Here you put your server box ip

    Then find <udp_port>10000</udp_port>
    Here you put servers port

    Find the section <newcamdserver>
    and then the <name>testserver</name>
    Here you put the name of your server (testserver)
    Then find <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
    Here you put a login key for your users in this format
    Then find
    <user>
    <name>username1</name>
    <password>userpas1</password>
    <au>on</au>
    <spider>No</spider>
    </user>
    and put user name and password for your users
    ************************************************** ******************************

    Server and client configuration of file Newcamd.conf (/var/tuxbox/config/newcamd)

    (in the supplied zip there is a Newcamd.conf file for this example)
    Open the file with a plain text editor

    Find the line:

    CWS = 192.168.0.1 10000 username1 userpas1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan testserver

    Line parts in plain English
    1)192.168.0.1 --- ip address of the server (dreambox acting as server)
    (the same as the one defined on newcs.xlm)
    2)10000 --- port of the server (the same as the one defined on newcs.xlm)
    3)username1 userpas1 --- username and pass of the client (the same as the one defined on newcs.xlm)
    4)01 02 03 04 05 06 07 08 09 10 11 12 13 14 --- access code (the same as the one defined on newcs.xlm)
    5)lan -- leave this as lan
    6)cardserv - name of the cardsharing server (the same as the one defined on newcs.xlm)
    ************************************************** ******************************

    IMPORTAND!!!!!!!!!!!!!!!!!!!!!!!!
    Entrys in newcs.xml must be the same in the newcamd.conf
    (ip addresses-servername-username-password-deskey)
    All this is case sensitive (username it is not the same with UserName)

    After saving transer the 2 files in your Dreambox and restart your boxes...
    In lan setups this is ready to work
    In wan setups you need a router or a dreambox plugin with DynamicDNS capabilities

    You are ready to CARDSHARE

Page 1 of 2 12 LastLast

Similar Threads

  1. Old Μoίρασμα κάρτας[cs] - Guides for PC and dreambox
    By colossus_r in forum Greek / Ελληνικά
    Replies: 407
    Last Post: 22-05-2010, 04:31:51
  2. wholesale dreambox 500s,dreambox 500c,dreambox 800hd
    By Chinadreambox in forum Dealer Directory
    Replies: 5
    Last Post: 03-04-2010, 00:47:18
  3. Guides HowTo make some tip and tricks on your Dreambox
    By lolazoca in forum Dreambox Information and Tutorials
    Replies: 0
    Last Post: 22-04-2009, 23:20:31
  4. HowTo connect the internal HDD of an Enigma 1 Dreambox with an Enigma 2 Dreambox (and
    By lolazoca in forum Dreambox Information and Tutorials
    Replies: 0
    Last Post: 01-03-2009, 19:26:53
  5. Dreambox 7000S images into Dreambox 7020
    By enriquerif in forum Dreambox
    Replies: 2
    Last Post: 12-03-2006, 11:32:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •