Results 1 to 5 of 5

Thread: Howto Ignore Old cards & Inused IDs

  1. #1
    Justice For All Tunimax's Avatar
    Join Date
    11-07-2006
    Location
    In My Room
    Posts
    3,741
    Uploads
    1,548

    Howto Ignore Old cards & Inused IDs

    On Gbox its easy to put one ignore.list on the box for all connected peers.

    On CCcam you must Ignore bad Crads in every c line you have. But you can also Ignore some Providers only on special hops thats also very interest because you don't need 50 cards of a provider in hop3 when you have also 20 on hop2 and 5 on hop1 so your CCcam will be faster when you make a good configur of your cccam.

    Exemple 1:



    Code:
    C: dyndns.org 12000 user pass no { 0:0:3, 1702:000000, 1722:000000 }

    This will ignore Premiere on all hops from this peer. Very Important is the no
    Without the no it dont work.

    Exemple 2:



    Code:
    C: dyndns.org 12000 user pass no { 0:0:3, 1702:000000:2, 1722:000000:2 }

    You get Premiere only on hop1 and hop2 from this peer.

    Now I Ignore this Providers in every Cline:



    Code:
    C: dyndns.org 12000 user pass no 
    { 0:0:3, 0100:000002, 0100:000003, 0100:000004, 0100:000005, 0100:000009, 0100:00000A, 0100:00000C, 0100:00000D, 0100:00000E, 0100:00000F, 0100:000010, 0100:000011, 0100:000012, 0100:000013, 0100:000014, 0100:000019, 0100:00001A, 0100:00001B, 0100:00001C, 0100:00001D, 0100:000020, 0100:000021, 0100:000025, 0100:000026, 0100:000029, 0100:00002E, 0100:000031, 0100:000033, 0100:000034, 0100:000037, 0100:00003E, 0100:000066, 0100:000067, 0100:000068, 0100:00006B, 0100:00006F, 0100:000070, 0100:000071, 0100:000072, 0100:000073, 0100:00007B, 0100:000082, 0100:000083, 0100:00008C, 0100:00009D, 0100:00009E, 0100:0000A0, 0100:0000A1, 0100:0000A2, 0100:0000A3, 0100:0000AC, 0100:0000AD, 0100:0000AE, 0100:0000B0, 0100:0000B2, 0100:000140, 0100:000141, 0100:000142, 0100:000143, 0100:000144, 0100:00331B, 0100:00331D, 0100:004001, 0100:004002, 0100:004006, 0100:004102, 0100:004108, 0100:005001, 0100:005211, 0100:005225, 0100:00A829, 0500:001540, 0500:001570, 0500:002500, 0500:007000,0500:007010,0500:007C00, 0500:008000, 0500:008100, 0500:008C00, 0500:008C10, 0500:009400, 0500:00E470, 0500:00E800, 0500:012000, 0500:012010, 0500:015000, 0500:016800, 0500:016810, 0500:018810, 0500:018820, 0500:020A10, 0500:020A20, 0500:020A30, 0500:020C00, 0500:020C10, 0500:020C20, 0500:020C30, 0500:020C40, 0500:021120, 0500:021510, 0500:021570, 0500:021710, 0500:021B10, 0500:021C10, 0500:022210, 0500:022E10, 0500:022F10, 0500:023110, 0500:023120, 0500:023130, 0500:023140, 0500:023210, 0500:024410, 0500:024F10, 0500:025120, 0500:025910, 0500:030A10, 0500:030A20, 0500:030A30, 0500:030A40, 0618:000000, 0D00:006400, 0D00:006800, 0D00:00C400, 0D00:00C800, 0D00:00CC00, 0D02:008000, 0D02:008800, 0D02:008C00, 0D02:00A400, 0D02:00A800, 0D03:00C000, 0D03:00C400, 0D03:00C800, 0D06:000800, 0D06:000C00, 0D06:001000, 0D06:00C400, 0D06:00C800, 0D06:00CC00, 1800:004001, 1800:004101, 1800:007001, 1800:007101, 1801:000501, 1801:000503, 1801:000505, 1801:000511, 1801:002111, 1801:003101, 1801:004001, 1801:004002, 1801:004101, 1801:004102, 1801:004801, 1801:004901, 1801:007101, 1801:00C101, 1801:00C102, 1802:002111, 1802:004901, 1802:008C11, 1802:008D11, 1803:007101, 1803:008D11, 1804:008D11, 1810:004101, 1810:00B101, 1815:00B901, 1830:003501, 1830:003503, 4A63:000000, 4AA0:000000 }

    This little copy and past on every c line in your cccam.cfg will help u and all other peers to make cccam faster and more stabieler.

    This ignore more or less the most old cards, this cards dont work anymore.
    You can post here your comments ; other unused prov .... to make this up2date
    In the attachment you can find the latest CCcam.providers

    You can also add unkown providers to CCcam.prio file (I line) to Ignore them ; this way you receive card but it stop traffics with ignored providers .It work like a filter.

  2. #2

    Re: Howto Ignore Old cards & Inused IDs

    my problem is that i have some peers who donesn't have milan channel but when i put milan channels i receive ecm from their cards , so i want block milan channel from them to receive it only from peers who have milan channel really working , but i haven't found the wright solution

    when i try C: host port user pass no { 0:0:2, 093b:000000 } { 093b:000000:2c3ah } , it not stop only milan channel , but it stops all the provider

    and when i try C: host port user pass no { 0:0:2 } { 093b:000000:2c3ah } , it don't stop nothing

    i haven't found the wright confg to stop only one channel

  3. #3
    VIP Member noobox's Avatar
    Join Date
    12-03-2006
    Location
    Aghioul City
    Posts
    737
    Uploads
    6

    Re: Howto Ignore Old cards & Inused IDs

    Quote Originally Posted by oklahoma View Post
    my problem is that i have some peers who donesn't have milan channel but when i put milan channels i receive ecm from their cards , so i want block milan channel from them to receive it only from peers who have milan channel really working , but i haven't found the wright solution

    when i try C: host port user pass no { 0:0:2, 093b:000000 } { 093b:000000:2c3ah } , it not stop only milan channel , but it stops all the provider

    and when i try C: host port user pass no { 0:0:2 } { 093b:000000:2c3ah } , it don't stop nothing

    i haven't found the wright confg to stop only one channel
    There is no optional limits caid:id:sid for Cline only uphops share limits.
    Your peers must add the SMARTCARD SID ASSIGN option to specify what channels are opens on there cards. And offcorse they can add the sid block on F line.

  4. #4
    VIP Member noobox's Avatar
    Join Date
    12-03-2006
    Location
    Aghioul City
    Posts
    737
    Uploads
    6

    Re: Howto Ignore Old cards & Inused IDs

    The better way is to use the SMARTCARD SID ASSIGN option.

    It is easy to set, just take a CCcam.Channelinfo file with full up to date list of the provider channels and remove all the caid:prvid and all the channel not opened.

    Somethink like this

    093B:000000:0DC0 "Sky Italia - Caccia e Pesca [NDS3]"
    093B:000000:0DCA "Sky Italia - Jimmy Italia [NDS3]"
    093B:000000:0DCF "Sky Italia - DeA Kids [NDS3]"
    093B:000000:0DFA "Sky Italia - Yacht & Sail [NDS3]"
    093B:000000:0E03 "Sky Italia - Moto TV [NDS3]"
    093B:000000:0E04 "Sky Italia - Fox Crime +1 Italia [NDS3]"
    093B:000000:2C25 "Sky Italia - Rock TV [NDS3]"
    093B:000000:2C26 "Sky Italia - Animal Planet Italia [NDS3]"
    093B:000000:2C28 "Sky Italia - Discovery Real Time Italia [NDS3]"
    093B:000000:2C2A "Sky Italia - Discovery Channel Italy [NDS3]"
    093B:000000:2C2C "Sky Italia - Class CNBC [NDS3]"
    093B:000000:2C2E "Sky Italia - RaiSat Cinema [NDS3]"
    093B:000000:2C31 "Sky Italia - RaiSat Gambero Rosso [NDS3]"
    093B:000000:2C32 "Sky Italia - RaiSat Yoyo [NDS3]"
    093B:000000:2C33 "Sky Italia - Video Italia [NDS3]"
    093B:000000:2C36 "Sky Italia - Comedy Central Italia [NDS3]"
    093B:000000:2C38 "Sky Italia - Nickelodeon Italia [NDS3]"
    093B:000000:2C3C "Sky Italia - NASN Europe [NDS3]"

    0DC0
    0DCA
    0DCF
    0DFA
    0E03
    0E04
    2C25
    2C26
    2C28
    2C2A
    2C2C
    2C2E
    2C31
    2C32
    2C33
    2C36
    2C38
    2C3C

    And the final result

    SMARTCARD SID ASSIGN : /dev/sci0 0 { 0DC0,0DCA,0DCF,0DFA,0E03,0E04,2C25,2C26,2C28,2C2A, 2C2C,2C2E,2C31,2C32,2C33,2C36,2C38,2C3C }

    Now the card will ignore all the other SID that are not specified on this list

  5. #5

    Re: Howto Ignore Old cards & Inused IDs

    Quote Originally Posted by Tunimax View Post
    On Gbox its easy to put one ignore.list on the box for all connected peers.

    On CCcam you must Ignore bad Crads in every c line you have. But you can also Ignore some Providers only on special hops thats also very interest because you don't need 50 cards of a provider in hop3 when you have also 20 on hop2 and 5 on hop1 so your CCcam will be faster when you make a good configur of your cccam.

    Exemple 1:



    Code:
    C: dyndns.org 12000 user pass no { 0:0:3, 1702:000000, 1722:000000 }

    This will ignore Premiere on all hops from this peer. Very Important is the no
    Without the no it dont work.

    Exemple 2:



    Code:
    C: dyndns.org 12000 user pass no { 0:0:3, 1702:000000:2, 1722:000000:2 }

    You get Premiere only on hop1 and hop2 from this peer.

    Now I Ignore this Providers in every Cline:



    Code:
    C: dyndns.org 12000 user pass no 
    { 0:0:3, 0100:000002, 0100:000003, 0100:000004, 0100:000005, 0100:000009, 0100:00000A, 0100:00000C, 0100:00000D, 0100:00000E, 0100:00000F, 0100:000010, 0100:000011, 0100:000012, 0100:000013, 0100:000014, 0100:000019, 0100:00001A, 0100:00001B, 0100:00001C, 0100:00001D, 0100:000020, 0100:000021, 0100:000025, 0100:000026, 0100:000029, 0100:00002E, 0100:000031, 0100:000033, 0100:000034, 0100:000037, 0100:00003E, 0100:000066, 0100:000067, 0100:000068, 0100:00006B, 0100:00006F, 0100:000070, 0100:000071, 0100:000072, 0100:000073, 0100:00007B, 0100:000082, 0100:000083, 0100:00008C, 0100:00009D, 0100:00009E, 0100:0000A0, 0100:0000A1, 0100:0000A2, 0100:0000A3, 0100:0000AC, 0100:0000AD, 0100:0000AE, 0100:0000B0, 0100:0000B2, 0100:000140, 0100:000141, 0100:000142, 0100:000143, 0100:000144, 0100:00331B, 0100:00331D, 0100:004001, 0100:004002, 0100:004006, 0100:004102, 0100:004108, 0100:005001, 0100:005211, 0100:005225, 0100:00A829, 0500:001540, 0500:001570, 0500:002500, 0500:007000,0500:007010,0500:007C00, 0500:008000, 0500:008100, 0500:008C00, 0500:008C10, 0500:009400, 0500:00E470, 0500:00E800, 0500:012000, 0500:012010, 0500:015000, 0500:016800, 0500:016810, 0500:018810, 0500:018820, 0500:020A10, 0500:020A20, 0500:020A30, 0500:020C00, 0500:020C10, 0500:020C20, 0500:020C30, 0500:020C40, 0500:021120, 0500:021510, 0500:021570, 0500:021710, 0500:021B10, 0500:021C10, 0500:022210, 0500:022E10, 0500:022F10, 0500:023110, 0500:023120, 0500:023130, 0500:023140, 0500:023210, 0500:024410, 0500:024F10, 0500:025120, 0500:025910, 0500:030A10, 0500:030A20, 0500:030A30, 0500:030A40, 0618:000000, 0D00:006400, 0D00:006800, 0D00:00C400, 0D00:00C800, 0D00:00CC00, 0D02:008000, 0D02:008800, 0D02:008C00, 0D02:00A400, 0D02:00A800, 0D03:00C000, 0D03:00C400, 0D03:00C800, 0D06:000800, 0D06:000C00, 0D06:001000, 0D06:00C400, 0D06:00C800, 0D06:00CC00, 1800:004001, 1800:004101, 1800:007001, 1800:007101, 1801:000501, 1801:000503, 1801:000505, 1801:000511, 1801:002111, 1801:003101, 1801:004001, 1801:004002, 1801:004101, 1801:004102, 1801:004801, 1801:004901, 1801:007101, 1801:00C101, 1801:00C102, 1802:002111, 1802:004901, 1802:008C11, 1802:008D11, 1803:007101, 1803:008D11, 1804:008D11, 1810:004101, 1810:00B101, 1815:00B901, 1830:003501, 1830:003503, 4A63:000000, 4AA0:000000 }

    This little copy and past on every c line in your cccam.cfg will help u and all other peers to make cccam faster and more stabieler.

    This ignore more or less the most old cards, this cards dont work anymore.
    You can post here your comments ; other unused prov .... to make this up2date
    In the attachment you can find the latest CCcam.providers

    You can also add unkown providers to CCcam.prio file (I line) to Ignore them ; this way you receive card but it stop traffics with ignored providers .It work like a filter.
    Quote Originally Posted by noobox View Post
    The better way is to use the SMARTCARD SID ASSIGN option.

    It is easy to set, just take a CCcam.Channelinfo file with full up to date list of the provider channels and remove all the caid:prvid and all the channel not opened.

    Somethink like this

    093B:000000:0DC0 "Sky Italia - Caccia e Pesca [NDS3]"
    093B:000000:0DCA "Sky Italia - Jimmy Italia [NDS3]"
    093B:000000:0DCF "Sky Italia - DeA Kids [NDS3]"
    093B:000000:0DFA "Sky Italia - Yacht & Sail [NDS3]"
    093B:000000:0E03 "Sky Italia - Moto TV [NDS3]"
    093B:000000:0E04 "Sky Italia - Fox Crime +1 Italia [NDS3]"
    093B:000000:2C25 "Sky Italia - Rock TV [NDS3]"
    093B:000000:2C26 "Sky Italia - Animal Planet Italia [NDS3]"
    093B:000000:2C28 "Sky Italia - Discovery Real Time Italia [NDS3]"
    093B:000000:2C2A "Sky Italia - Discovery Channel Italy [NDS3]"
    093B:000000:2C2C "Sky Italia - Class CNBC [NDS3]"
    093B:000000:2C2E "Sky Italia - RaiSat Cinema [NDS3]"
    093B:000000:2C31 "Sky Italia - RaiSat Gambero Rosso [NDS3]"
    093B:000000:2C32 "Sky Italia - RaiSat Yoyo [NDS3]"
    093B:000000:2C33 "Sky Italia - Video Italia [NDS3]"
    093B:000000:2C36 "Sky Italia - Comedy Central Italia [NDS3]"
    093B:000000:2C38 "Sky Italia - Nickelodeon Italia [NDS3]"
    093B:000000:2C3C "Sky Italia - NASN Europe [NDS3]"

    0DC0
    0DCA
    0DCF
    0DFA
    0E03
    0E04
    2C25
    2C26
    2C28
    2C2A
    2C2C
    2C2E
    2C31
    2C32
    2C33
    2C36
    2C38
    2C3C

    And the final result

    SMARTCARD SID ASSIGN : /dev/sci0 0 { 0DC0,0DCA,0DCF,0DFA,0E03,0E04,2C25,2C26,2C28,2C2A, 2C2C,2C2E,2C31,2C32,2C33,2C36,2C38,2C3C }

    Now the card will ignore all the other SID that are not specified on this list


    hi

    thank for the expemple nice work for fake or old card

    i post my SMARTCARD SID ASSIGN : for bis tv card slot 0 id 20810 bis tv option cinema NO xx NO art NO ab3/4

    SMARTCARD SID ASSIGN : /dev/sci0 0 { 3786,00C8,00C9,00CA,00CB,00CC,00CD,00CE,00CF,00D0, 00D1,00D2,00D4,00D5,00D7,00D9,00DA,00DB,019A,01AE, 01E7,1C39,01F5,01F6,01F7,01F8,01F9,01FA,01FB,01FD, 0201,0218,021A,021B,021D,427C,427D,427E,427F,4281, 4282,4283,4284,4286,4287,4288,4289,428A,428B,428C, 4290,0196,00D5,00D6,012D,0132,0134,0135,0137,0138, 013A,013B,013D,013E,3C5A,0196 }

    @ +

Similar Threads

  1. Howto: HD+ with oscam
    By wahid in forum OSCam
    Replies: 0
    Last Post: 04-12-2009, 19:24:25
  2. Tutorial Howto for Barry Allen -
    By Tunimax in forum Dreambox Information and Tutorials
    Replies: 0
    Last Post: 11-09-2009, 03:14:28
  3. Psanxw Gia HowTo Cs
    By stathisar in forum Greek / Ελληνικά
    Replies: 2
    Last Post: 06-12-2005, 14:54:37

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •