Results 1 to 2 of 2

Thread: cccam server

  1. #1
    New Member
    Join Date

    cccam server

    am si eu nevoie de ajutor pt a configura un card focus intr-un dm 800 pt reshare

  2. #2

    Re: cccam server

    Mo,eu shtiu ca "Bogata " e linga Turda,am fost acolo in armata,cand au facut adapostul shi biuta pt k14,sus pe deal shi de aia i-tzi raspund explicit:
    configuratzie cccam server nu are legatura cu rshare(care de fapt ar trebui sa insemne rapid share-asta intzelege omu cand citeshte "rshare").
    De la capat: cccamconfig e cu totul altceva.I-tzi caut link shi tzi-l pun,dar pentru viitor sa incerci "google" cu termenul de cautare adecvat: in cazul tau-cccamconfig.

    " CCcam.cfg HOW-TO - 30-March-2007, 09:16

    Okay i'll try to explain how the config works with CCcam.

    To add a user you have to put a F line in the config :

    F: user password 3 1 0 { 0:0:5 }

    user gets all our cards at max distance(hops) of 3

    He has the right to use our emu keys 1, no rights to emu keys change into 0

    He has NO AU rights 0, right for AU change into 1

    Furthermore he has the right to reshare all our cards 4 more times { 0:0:5 }
    When number is here { 0:0:1 } he can only watch himself and he has no reshare rights.

    NEVER GO ABOVE NUMBER 5!! because the distance is to far then. ( like GBOX { 5 5 })

    You can set portnumber by changing this rule :

    SERVER LISTEN PORT: number you want.

    To connect to a CCcam server you have to add a C line:

    C: ip/dyndns_server port user password yes

    The yes on the end says you want to use your rights for emu keys

    To connect to a newcamd server you have to add A N line:

    N: ip/dyndns port user password deskey hops_away

    To connect to a radegast server you need to add a R line:

    R: IP/dyndns port CAID(4digits) providerID(6digits) hops_away

    To connect to a Camd3 server you have to add a L line:

    L: IP/dyndns port CAID(4digits) providerID(6digits) hops_away

    These are the basics of the config for CCcam.

    Expert setup follows

    (03-30-2007 09:39 AM)
    OK here we go, the above settings are the basics now we go further.

    With a Cccam server you are always in controll
    You decide how much your friend is going to see and how far he can reshare it

    F: user password 0 0 0 { 0:0:1 }

    Says that user gets only our local cards:0 and he only can watch it himself he has no reshare rights.
    When changing the zero into 1 user gets our local cards and all vitual cards at a max distance of 1 hop.
    If number is 2 then a max distance of 2 hops etc.
    Don't exceed number 5 because the distance is then too far away for stable picture

    In case U have 2 local cards and U only want that user get to see 1 u can do this excample:

    Card 1 = provider CDS 0100 00006A
    Card 2 = provider Premiere 1702 000000

    Now you want that user only gets to see your CDS card and not the premiere card do the following

    F: user password 3 1 0 { 0:0:5, 0100 00006A:1, 1702:0:0 }

    This user gets all cards at maximum distance of 3 hops except 1702 because he has no rights to it :0.
    He gets to reshare all our cards(local and virual) 4 times except for provider 0100 0006A because of :1.
    Say you want the user to have the right to reshare 0100 0006A 2 times further then change the :1 into 3

    So you see U decide what your friend(s) are entitled to see and how many rights they get, wants your card is set to reshare level 3 nobody but yourself can change that.

    If you have questions feel free

    (03-30-2007 09:46 AM)

    In the latest versions of CCcam it's possible to control your hops you are receiving from your peers.
    Thats realy a good option now you are in control how many shares online you have.

    Heavy testing for me said that 2500 shares online is maximum.

    To control receiving hops just add { 0:0:x } at the end of the C line, where x is the number of hops you want to receive.

    So: C: dyndnds port user passwd no { 0:0:2 } only gives me shares from that peer with max count of 2.

    Important: If you dont use yes/no behind the C lines add them or:

    ( { 0:0:2 } ) make it like this otherwise it won't work

    Thanks carp95 "

    Source: *****************************

    Numai Bine Tuturor

Similar Threads

  1. A Strong Newcs Server with 35 Nlines in Cccam Server
    By zulfiqarjpj in forum CCcam Exchange: in NewCS
    Replies: 0
    Last Post: 20-12-2009, 09:34:53
  2. New Big CCcam Server online 24/24_7/7 good server local ART
    By omar99lll in forum CCcam Exchange: Local
    Replies: 1
    Last Post: 25-11-2009, 00:40:47
  3. New Debian CCcam Server/ Dorcel-HOP1 SERVER
    By falcao75 in forum CCcam Exchange: Local
    Replies: 0
    Last Post: 01-02-2009, 20:44:11
  4. Replies: 0
    Last Post: 28-11-2008, 11:17:06
  5. Free CCcam Server - Also I accept Gbox Server
    By holywarde in forum Gbox Exchange: Free
    Replies: 0
    Last Post: 29-06-2008, 04:49:31

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts