Latest CAM / Addon's Files

[lolazoca]

CCcam 2.1.0

2.1.0
-keep persistant ecm counts for clients
-i2 emu
-IGNORE NODE option (see CCcam.cfg)
-emm caid tunneling
-Added seca handler to prefer or ignore SECA2 or SECA3 (see CCcam.cfg)

[babonji]

CCcam 2.1.0

where i can find ipk file of cccam 2.1.0 ?

[lolazoca]

rqcamd-1.19

08/04/2009 v1.19
- Fix for current DISH MECM.

[lolazoca]

CCcam 2.1.0 & newcs 1.6X


CCcam 2.1.0 & newcs 1.65 - NDS3

[lolazoca]

hypercam.1.02

Fixed N*S smartcard handling causing a crash
Fixed smartcard removall causing a crash
Fixed Nagra card timing settings
Fixed Nagra 3 system identification for smartcard

[pola0]

Scam 3.50a - Complete (DM500/56xx/7000)
am: 16.05.2009 13:37

Beschreibung: 
Ab Gemini 3.x

Addon nach /tmp/ kopieren und über Blue Panel manuell installieren

Dies ist eine Komplette-Version, diese enthält nun auch zusätzlich das Startscript für RonaldCS.
Wer dies nicht nutzt kann es auch über das delfile separat löschen...

Das Originalposting der Veröffentlichung ist  zur finden.

Neuerungen:
Scam 3.50a
- fix cryptoworks
- add cryptoworks pin
- fix pps
- add cainfo flag
- newcamd fix
- fix share

[lolazoca]

scam v3.51a
scam v3.51a- sifteam
scam v3.51a file for E1

- experimental serial reader support
- new config switch /debug/disable_pps to disable PPS for via and cryptoworks
- new config options for nagra cards without DT08
- sc_videoguard

smargo:

Zitat
1: Install the windows drivers
2: Open smartreader.exe
3: Plug the smartreader into a usb port
4: Select Autoswitch
5: Select Dreambox kernel
6: Make sure it returns with "writing settings successful"
7: Done



serial port smartcard readers:

Zitat
### serial port smartcard readers
# device node
#/sc/serial/<name>/device=<string>
#<>e.g.: /dev/ttyUSB0
# type
#/sc/serial/<name>/type=<string****<><><><>[default: phoenix]
#<>valid types: mastercrd2, phoenix, smartreader+
# clock frequency in Hz
#/sc/serial/<name>/fs=<num><><><><><>[default: 3571200]
z.b.
/sc/serial/usb0/device=/dev/ttyUSB0
/sc/serial/usb0/type=smartreader+




Zitat
* D: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCC }}
*
* Compressed P and Q, DT06 with *** ID 0x0d, used to calculate N
* +++ only needed for cards without DT08 +++
* A = System Type
* B = Card Serial
* C = *** (24 bytes)
* N: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCC }}
*
* RSA modulus used for session *** negotiation, equal to decrypted DT08; SK of Secondary ***
* +++ only needed for cards without DT08 +++
* A = System Type
* B = Card Serial
* C = Modulus (64 bytes)




Zitat
sc_videoguard:
* I: { AAAA BBBBBBBB { CCCCCCCC }}
*
* IRD serial number
* A = CA System ID
* B = Card Serial
* C = IRD Serial

[lolazoca]

mgcamd 1.34c -And- mgcamd-1.33 & Newcs-1.67

mgcamd 1.34c for coolstream hd1

27.08.2009

-again some cc fixes

mgcamd-1.33 & Newcs-1.67

27.08.2009
mgcamd-1.33 for sif image

[lolazoca]

Mgcamd-1.33 for qboxhd v2

Version 2 of the port-mgcamd for qbox hd.

An error in DigiTV has been fixed, now works.
(Perhaps there were other) provider affected

[lolazoca]

CCcam/NewCS Config Creator v0.5.4

For those having problems with writing their own newcs & cccam configs, this little beauty asks the questions and fills in the blanks, tested and working 100%.

It's here at last. This is a complete rewrite of the NewCS & CCcam Config Creator.

Now in v0.5.4 the GUI has undergone many changes again but hopefully for the better. I decided to release now because it seems a lot of people are still asking how to setup NewCS.

In this release I have disabled 'Advanced Mode' as the completion of that code was at least a month away but I thought it was a good time to help people out who just want a simple working setup.

Basic functions are as follows :-

1. Selectable Preset For NewCS.
In this release available presets are:-
a. Standard Config.
b. Sly UK Config.

2. Built in *** Box Key Generator.
3. Select Your Dreambox Model.
4. Built in FTP capability to send your created config files to the correct folders on your Dreambox.
5. Capability to create newcs.xml and CCcam.cfg seperatley.

The NewCS / CCcam Config Creator is .NET Framework compliant and is supplied as a standard MSI installer. This will ensure full compatibility with XP and Vista / 7.

Enjoy the release and please let me know your thoughts and bug reports.
Remember, this is still beta code, I need 'YOU' to help develop it.